Hi Hans, On Mon, Feb 08, 2021 at 12:34:55PM +0100, Hans Verkuil wrote: > On 08/02/2021 12:28, Laurent Pinchart wrote: > > On Mon, Feb 08, 2021 at 12:21:01PM +0100, Hans Verkuil wrote: > >> On 14/01/2021 18:04, Jacopo Mondi wrote: > >>> The RDACM21 is a GMSL camera supporting 1280x1080 resolution images > >>> developed by IMI based on an Omnivision OV10640 sensor, an Omnivision > >>> OV490 ISP and a Maxim MAX9271 GMSL serializer. > >>> > >>> The driver uses the max9271 library module, to maximize code reuse with > >>> other camera module drivers using the same serializer, such as rdacm20. > >>> > >>> Reviewed-by: Laurent Pinchart <[email protected]> > >>> Signed-off-by: Jacopo Mondi <[email protected]> > >>> --- > >>> MAINTAINERS | 12 + > >>> drivers/media/i2c/Kconfig | 13 + > >>> drivers/media/i2c/Makefile | 2 + > >>> drivers/media/i2c/rdacm21.c | 623 ++++++++++++++++++++++++++++++++++++ > >>> 4 files changed, 650 insertions(+) > >>> create mode 100644 drivers/media/i2c/rdacm21.c > >>> > >>> diff --git a/MAINTAINERS b/MAINTAINERS > >>> index 14adf87d90c7..1822d73ed615 100644 > >>> --- a/MAINTAINERS > >>> +++ b/MAINTAINERS > >>> @@ -14967,6 +14967,18 @@ F: drivers/media/i2c/max9271.c > >>> F: drivers/media/i2c/max9271.h > >>> F: drivers/media/i2c/rdacm20.c > >>> > >>> +RDACM21 Camera Sensor > >>> +M: Jacopo Mondi <[email protected]> > >>> +M: Kieran Bingham <[email protected]> > >>> +M: Laurent Pinchart <[email protected]> > >>> +M: Niklas Söderlund <[email protected]> > >>> +L: [email protected] > >>> +S: Maintained > >>> +F: Documentation/devicetree/bindings/media/i2c/rdacm2x-gmsl.yaml > >>> +F: drivers/media/i2c/max9271.c > >>> +F: drivers/media/i2c/max9271.h > >>> +F: drivers/media/i2c/rdacm21.c > >>> + > >>> RDC R-321X SoC > >>> M: Florian Fainelli <[email protected]> > >>> S: Maintained > >>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > >>> index 2b9d81e4794a..d500edb8638b 100644 > >>> --- a/drivers/media/i2c/Kconfig > >>> +++ b/drivers/media/i2c/Kconfig > >>> @@ -1212,6 +1212,19 @@ config VIDEO_RDACM20 > >>> This camera should be used in conjunction with a GMSL > >>> deserialiser such as the MAX9286. > >>> > >>> +config VIDEO_RDACM21 > >>> + tristate "IMI RDACM21 camera support" > >>> + depends on I2C > >>> + select V4L2_FWNODE > >>> + select VIDEO_V4L2_SUBDEV_API > >>> + select MEDIA_CONTROLLER > >>> + help > >>> + This driver supports the IMI RDACM21 GMSL camera, used in > >>> + ADAS systems. > >>> + > >>> + This camera should be used in conjunction with a GMSL > >>> + deserialiser such as the MAX9286. > >>> + > >>> config VIDEO_RJ54N1 > >>> tristate "Sharp RJ54N1CB0C sensor support" > >>> depends on I2C && VIDEO_V4L2 > >>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > >>> index a3149dce21bb..85b1edc62508 100644 > >>> --- a/drivers/media/i2c/Makefile > >>> +++ b/drivers/media/i2c/Makefile > >>> @@ -124,6 +124,8 @@ obj-$(CONFIG_VIDEO_IMX355) += imx355.o > >>> obj-$(CONFIG_VIDEO_MAX9286) += max9286.o > >>> rdacm20-camera_module-objs := rdacm20.o max9271.o > >>> obj-$(CONFIG_VIDEO_RDACM20) += rdacm20-camera_module.o > >>> +rdacm21-camera_module-objs := rdacm21.o max9271.o > >>> +obj-$(CONFIG_VIDEO_RDACM21) += rdacm21-camera_module.o > >>> obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o > >> > >> This isn't right. The max9271 code exports various functions, but since it > >> is > >> included with *two* modules (rdacm20/1-camera_module.ko) it is exported > >> twice. > >> > >> Since max9271 is not a self-contained driver it should not export symbols. > > > > Shouldn't we instead make max9271 a stand-alone module ? > > If that makes sense, then that's the alternative option. I don't know if it > can be used with anything else but rdacm20/21. > > Either way, this needs to be fixed.
I've just noticed that Mauro has submitted a patch for this. > >> Can you provide a patch fixing that? -- Regards, Laurent Pinchart
