Re: [PATCH v7 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree

[Marcin Wojtas]

Hi,

wt., 2 lut 2021 o 09:17 <stef...@marvell.com> napisał(a):
>
> From: Konstantin Porotchkin <kos...@marvell.com>
>
> CM3 SRAM address space would be used for Flow Control configuration.
>
> Signed-off-by: Stefan Chulski <stef...@marvell.com>
> Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi 
> b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 9dcf16b..359cf42 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

The commit message mentions CP115, but the patch updates both CP110
and CP115 - please update one of those (either message or the patch),
so that it is consistent.

Thanks,
Marcin


> @@ -69,6 +69,8 @@
>                         status = "disabled";
>                         dma-coherent;
>
> +                       cm3-mem = <&CP11X_LABEL(cm3_sram)>;
> +
>                         CP11X_LABEL(eth0): eth0 {
>                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
>                                         <43 IRQ_TYPE_LEVEL_HIGH>,
> @@ -211,6 +213,14 @@
>                         };
>                 };
>
> +               CP11X_LABEL(cm3_sram): cm3@220000 {
> +                       compatible = "mmio-sram";
> +                       reg = <0x220000 0x800>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges = <0 0x220000 0x800>;
> +               };
> +
>                 CP11X_LABEL(rtc): rtc@284000 {
>                         compatible = "marvell,armada-8k-rtc";
>                         reg = <0x284000 0x20>, <0x284080 0x24>;
> --
> 1.9.1
>