From: Mohammad Athari Bin Ismail <mohammad.athari.ism...@intel.com>
When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.
This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Suggested-by: Gomes, Vinicius <vinicius.go...@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ism...@intel.com>
Signed-off-by: Song, Yoong Siang <yoong.siang.s...@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 8ed3b2c..5698554 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -324,7 +324,12 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
} else if (!qopt->enable) {
- return stmmac_dma_qmode(priv, priv->ioaddr, queue,
MTL_QUEUE_DCB);
+ ret = stmmac_dma_qmode(priv, priv->ioaddr, queue,
+ MTL_QUEUE_DCB);
+ if (ret)
+ return ret;
+
+ priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
}
/* Port Transmit Rate and Speed Divider */
--
2.7.4
