On 2/1/21 5:34 AM, Kyle Tso wrote:
> PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
> 6.4.4.2.3 Structured VDM Version
> "The Structured VDM Version field of the Discover Identity Command
> sent and received during VDM discovery Shall be used to determine the
> lowest common Structured VDM Version supported by the Port Partners or
> Cable Plug and Shall continue to operate using this Specification
> Revision until they are Detached."
>
> Also clear the fields newly defined in SVDM version 2.0 for
> compatibilities. And fix some VDO definitions changed in the Spec.
>
> Signed-off-by: Kyle Tso <kyle...@google.com>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
> ---
> Changes since v2:
> - rename the variable and the functions (remove the text "common")
> - remove the macro
>
> drivers/usb/typec/altmodes/displayport.c | 8 +-
> drivers/usb/typec/class.c | 21 +-
> drivers/usb/typec/tcpm/tcpm.c | 47 +++-
> drivers/usb/typec/ucsi/displayport.c | 12 +-
> drivers/usb/typec/ucsi/ucsi.c | 2 +
> include/linux/usb/pd_vdo.h | 315 +++++++++++++++++------
> include/linux/usb/typec.h | 10 +
> 7 files changed, 326 insertions(+), 89 deletions(-)
>
> diff --git a/drivers/usb/typec/altmodes/displayport.c
> b/drivers/usb/typec/altmodes/displayport.c
> index e62e5e3da01e..7b47dd4ea531 100644
> --- a/drivers/usb/typec/altmodes/displayport.c
> +++ b/drivers/usb/typec/altmodes/displayport.c
> @@ -15,8 +15,10 @@
> #include <linux/usb/typec_dp.h>
> #include "displayport.h"
>
> -#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1, cmd) | \
> - VDO_OPOS(USB_TYPEC_DP_MODE))
> +#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1,
> \
> +
> typec_get_svdm_version((_dp)->typec), \
> + cmd)
> \
> + | VDO_OPOS(USB_TYPEC_DP_MODE))
>
> enum {
> DP_CONF_USB,
> @@ -62,6 +64,7 @@ struct dp_altmode {
> struct work_struct work;
> struct typec_altmode *alt;
> const struct typec_altmode *port;
> + struct typec_port *typec;
> };
>
> static int dp_altmode_notify(struct dp_altmode *dp)
> @@ -536,6 +539,7 @@ int dp_altmode_probe(struct typec_altmode *alt)
> mutex_init(&dp->lock);
> dp->port = port;
> dp->alt = alt;
> + dp->typec = typec_altmode2port(alt);
>
> alt->desc = "DisplayPort";
> alt->ops = &dp_altmode_ops;
> diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
> index 8f77669f9cf4..4cbdb7974b4a 100644
> --- a/drivers/usb/typec/class.c
> +++ b/drivers/usb/typec/class.c
> @@ -49,6 +49,7 @@ struct typec_port {
> enum typec_role vconn_role;
> enum typec_pwr_opmode pwr_opmode;
> enum typec_port_type port_type;
> + enum usb_pd_svdm_ver svdm_version;
> struct mutex port_type_lock;
>
> enum typec_orientation orientation;
> @@ -86,7 +87,7 @@ static const char * const typec_accessory_modes[] = {
>
> /* Product types defined in USB PD Specification R3.0 V2.0 */
> static const char * const product_type_ufp[8] = {
> - [IDH_PTYPE_UNDEF] = "undefined",
> + [IDH_PTYPE_NOT_UFP] = "not_ufp",
> [IDH_PTYPE_HUB] = "hub",
> [IDH_PTYPE_PERIPH] = "peripheral",
> [IDH_PTYPE_PSD] = "psd",
> @@ -94,17 +95,17 @@ static const char * const product_type_ufp[8] = {
> };
>
> static const char * const product_type_dfp[8] = {
> - [IDH_PTYPE_DFP_UNDEF] = "undefined",
> + [IDH_PTYPE_NOT_DFP] = "not_dfp",
> [IDH_PTYPE_DFP_HUB] = "hub",
> [IDH_PTYPE_DFP_HOST] = "host",
> [IDH_PTYPE_DFP_PB] = "power_brick",
> - [IDH_PTYPE_DFP_AMC] = "amc",
> };
>
> static const char * const product_type_cable[8] = {
> - [IDH_PTYPE_UNDEF] = "undefined",
> + [IDH_PTYPE_NOT_CABLE] = "not_cable",
> [IDH_PTYPE_PCABLE] = "passive",
> [IDH_PTYPE_ACABLE] = "active",
> + [IDH_PTYPE_VPD] = "vpd",
> };
>
> static struct usb_pd_identity *get_pd_identity(struct device *dev)
> @@ -1788,6 +1789,18 @@ int typec_find_port_data_role(const char *name)
> }
> EXPORT_SYMBOL_GPL(typec_find_port_data_role);
>
> +void typec_set_svdm_version(struct typec_port *port, enum usb_pd_svdm_ver
> ver)
> +{
> + port->svdm_version = ver;
> +}
> +EXPORT_SYMBOL_GPL(typec_set_svdm_version);
> +
> +enum usb_pd_svdm_ver typec_get_svdm_version(struct typec_port *port)
> +{
> + return port->svdm_version;
> +}
> +EXPORT_SYMBOL_GPL(typec_get_svdm_version);
> +
> /* ------------------------------------------ */
> /* API for Multiplexer/DeMultiplexer Switches */
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 0afd8ef692e8..979b7ee6473c 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -1475,6 +1475,7 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> const u32 *p, int cnt, u32 *response,
> enum adev_actions *adev_action)
> {
> + struct typec_port *typec = port->typec_port;
> struct typec_altmode *pdev;
> struct pd_mode_data *modep;
> int rlen = 0;
> @@ -1500,10 +1501,21 @@ static int tcpm_pd_svdm(struct tcpm_port *port,
> struct typec_altmode *adev,
> if (PD_VDO_VID(p[0]) != USB_SID_PD)
> break;
>
> + if (PD_VDO_SVDM_VER(p[0]) <
> typec_get_svdm_version(typec))
> + typec_set_svdm_version(typec,
> PD_VDO_SVDM_VER(p[0]));
> /* 6.4.4.3.1: Only respond as UFP (device) */
> if (port->data_role == TYPEC_DEVICE &&
> port->nr_snk_vdo) {
> - for (i = 0; i < port->nr_snk_vdo; i++)
> + /*
> + * Product Type DFP and Connector Type are not
> defined in SVDM
> + * version 1.0 and shall be set to zero.
> + */
> + if (typec_get_svdm_version(typec) <
> SVDM_VER_2_0)
> + response[1] = port->snk_vdo[0] &
> ~IDH_DFP_MASK
> + & ~IDH_CONN_MASK;
> + else
> + response[1] = port->snk_vdo[0];
> + for (i = 1; i < port->nr_snk_vdo; i++)
> response[i + 1] = port->snk_vdo[i];
> rlen = port->nr_snk_vdo + 1;
> }
> @@ -1532,6 +1544,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> response[0] = p[0] | VDO_CMDT(CMDT_RSP_BUSY);
> rlen = 1;
> }
> + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
> + (VDO_SVDM_VERS(typec_get_svdm_version(typec)));
> break;
> case CMDT_RSP_ACK:
> /* silently drop message if we are not connected */
> @@ -1542,19 +1556,23 @@ static int tcpm_pd_svdm(struct tcpm_port *port,
> struct typec_altmode *adev,
>
> switch (cmd) {
> case CMD_DISCOVER_IDENT:
> + if (PD_VDO_SVDM_VER(p[0]) <
> typec_get_svdm_version(typec))
> + typec_set_svdm_version(typec,
> PD_VDO_SVDM_VER(p[0]));
> /* 6.4.4.3.1 */
> svdm_consume_identity(port, p, cnt);
> - response[0] = VDO(USB_SID_PD, 1, CMD_DISCOVER_SVID);
> + response[0] = VDO(USB_SID_PD, 1,
> typec_get_svdm_version(typec),
> + CMD_DISCOVER_SVID);
> rlen = 1;
> break;
> case CMD_DISCOVER_SVID:
> /* 6.4.4.3.2 */
> if (svdm_consume_svids(port, p, cnt)) {
> - response[0] = VDO(USB_SID_PD, 1,
> + response[0] = VDO(USB_SID_PD, 1,
> typec_get_svdm_version(typec),
> CMD_DISCOVER_SVID);
> rlen = 1;
> } else if (modep->nsvids && supports_modal(port)) {
> response[0] = VDO(modep->svids[0], 1,
> + typec_get_svdm_version(typec),
> CMD_DISCOVER_MODES);
> rlen = 1;
> }
> @@ -1565,7 +1583,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> modep->svid_index++;
> if (modep->svid_index < modep->nsvids) {
> u16 svid = modep->svids[modep->svid_index];
> - response[0] = VDO(svid, 1, CMD_DISCOVER_MODES);
> + response[0] = VDO(svid, 1,
> typec_get_svdm_version(typec),
> + CMD_DISCOVER_MODES);
> rlen = 1;
> } else {
> tcpm_register_partner_altmodes(port);
> @@ -1592,6 +1611,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> /* Unrecognized SVDM */
> response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
> rlen = 1;
> + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
> +
> (VDO_SVDM_VERS(typec_get_svdm_version(typec)));
> break;
> }
> break;
> @@ -1611,6 +1632,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> /* Unrecognized SVDM */
> response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
> rlen = 1;
> + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
> +
> (VDO_SVDM_VERS(typec_get_svdm_version(typec)));
> break;
> }
> port->vdm_sm_running = false;
> @@ -1618,6 +1641,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct
> typec_altmode *adev,
> default:
> response[0] = p[0] | VDO_CMDT(CMDT_RSP_NAK);
> rlen = 1;
> + response[0] = (response[0] & ~VDO_SVDM_VERS_MASK) |
> + (VDO_SVDM_VERS(typec_get_svdm_version(typec)));
> port->vdm_sm_running = false;
> break;
> }
> @@ -1695,7 +1720,9 @@ static void tcpm_handle_vdm_request(struct tcpm_port
> *port,
> break;
> case ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL:
> if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) {
> - response[0] = VDO(adev->svid, 1, CMD_EXIT_MODE);
> + response[0] = VDO(adev->svid, 1,
> +
> typec_get_svdm_version(port->typec_port),
> + CMD_EXIT_MODE);
> response[0] |= VDO_OPOS(adev->mode);
> rlen = 1;
> }
> @@ -1729,7 +1756,8 @@ static void tcpm_send_vdm(struct tcpm_port *port, u32
> vid, int cmd,
>
> /* set VDM header with VID & CMD */
> header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ?
> - 1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION), cmd);
> + 1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION),
> + typec_get_svdm_version(port->typec_port), cmd);
> tcpm_queue_vdm(port, header, data, count);
> }
>
> @@ -2024,7 +2052,8 @@ static int tcpm_altmode_enter(struct typec_altmode
> *altmode, u32 *vdo)
> struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
> u32 header;
>
> - header = VDO(altmode->svid, vdo ? 2 : 1, CMD_ENTER_MODE);
> + header = VDO(altmode->svid, vdo ? 2 : 1,
> typec_get_svdm_version(port->typec_port),
> + CMD_ENTER_MODE);
> header |= VDO_OPOS(altmode->mode);
>
> tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0);
> @@ -2036,7 +2065,7 @@ static int tcpm_altmode_exit(struct typec_altmode
> *altmode)
> struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
> u32 header;
>
> - header = VDO(altmode->svid, 1, CMD_EXIT_MODE);
> + header = VDO(altmode->svid, 1,
> typec_get_svdm_version(port->typec_port), CMD_EXIT_MODE);
> header |= VDO_OPOS(altmode->mode);
>
> tcpm_queue_vdm_unlocked(port, header, NULL, 0);
> @@ -3445,6 +3474,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
> port->attached = false;
> port->pd_capable = false;
> port->pps_data.supported = false;
> + typec_set_svdm_version(port->typec_port, port->typec_caps.svdm_version);
>
> /*
> * First Rx ID should be 0; set this to a sentinel of -1 so that
> @@ -5952,6 +5982,7 @@ struct tcpm_port *tcpm_register_port(struct device
> *dev, struct tcpc_dev *tcpc)
> port->typec_caps.fwnode = tcpc->fwnode;
> port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */
> port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */
> + port->typec_caps.svdm_version = SVDM_VER_2_0;
> port->typec_caps.driver_data = port;
> port->typec_caps.ops = &tcpm_ops;
> port->typec_caps.orientation_aware = 1;
> diff --git a/drivers/usb/typec/ucsi/displayport.c
> b/drivers/usb/typec/ucsi/displayport.c
> index 261131c9e37c..b58ef26a50e0 100644
> --- a/drivers/usb/typec/ucsi/displayport.c
> +++ b/drivers/usb/typec/ucsi/displayport.c
> @@ -48,6 +48,7 @@ struct ucsi_dp {
> static int ucsi_displayport_enter(struct typec_altmode *alt, u32 *vdo)
> {
> struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
> + struct typec_port *port = dp->con->port;
> struct ucsi *ucsi = dp->con->ucsi;
> u64 command;
> u8 cur = 0;
> @@ -83,7 +84,7 @@ static int ucsi_displayport_enter(struct typec_altmode
> *alt, u32 *vdo)
> * mode, and letting the alt mode driver continue.
> */
>
> - dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_ENTER_MODE);
> + dp->header = VDO(USB_TYPEC_DP_SID, 1, typec_get_svdm_version(port),
> CMD_ENTER_MODE);
> dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
> dp->header |= VDO_CMDT(CMDT_RSP_ACK);
>
> @@ -101,6 +102,7 @@ static int ucsi_displayport_enter(struct typec_altmode
> *alt, u32 *vdo)
> static int ucsi_displayport_exit(struct typec_altmode *alt)
> {
> struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
> + struct typec_port *port = dp->con->port;
> u64 command;
> int ret = 0;
>
> @@ -120,7 +122,7 @@ static int ucsi_displayport_exit(struct typec_altmode
> *alt)
> if (ret < 0)
> goto out_unlock;
>
> - dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_EXIT_MODE);
> + dp->header = VDO(USB_TYPEC_DP_SID, 1, typec_get_svdm_version(port),
> CMD_EXIT_MODE);
> dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
> dp->header |= VDO_CMDT(CMDT_RSP_ACK);
>
> @@ -184,6 +186,7 @@ static int ucsi_displayport_vdm(struct typec_altmode *alt,
> u32 header, const u32 *data, int count)
> {
> struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
> + struct typec_port *port = dp->con->port;
> int cmd_type = PD_VDO_CMDT(header);
> int cmd = PD_VDO_CMD(header);
>
> @@ -200,7 +203,10 @@ static int ucsi_displayport_vdm(struct typec_altmode
> *alt,
>
> switch (cmd_type) {
> case CMDT_INIT:
> - dp->header = VDO(USB_TYPEC_DP_SID, 1, cmd);
> + if (PD_VDO_SVDM_VER(header) < typec_get_svdm_version(port))
> + typec_set_svdm_version(port, PD_VDO_SVDM_VER(header));
> +
> + dp->header = VDO(USB_TYPEC_DP_SID, 1,
> typec_get_svdm_version(port), cmd);
> dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
>
> switch (cmd) {
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index ca3f4194ad90..8c4897a7bf75 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -764,6 +764,7 @@ static void ucsi_handle_connector_change(struct
> work_struct *work)
>
> if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
> typec_set_pwr_role(con->port, role);
> + typec_set_svdm_version(con->port, con->typec_cap.svdm_version);
>
> switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
> case UCSI_CONSTAT_PARTNER_TYPE_UFP:
> @@ -1052,6 +1053,7 @@ static int ucsi_register_port(struct ucsi *ucsi, int
> index)
>
> cap->revision = ucsi->cap.typec_version;
> cap->pd_revision = ucsi->cap.pd_version;
> + cap->svdm_version = SVDM_VER_2_0;
> cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
>
> if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY)
> diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
> index 8c08eeb9a74b..c30d893c9c81 100644
> --- a/include/linux/usb/pd_vdo.h
> +++ b/include/linux/usb/pd_vdo.h
> @@ -21,22 +21,24 @@
> * ----------
> * <31:16> :: SVID
> * <15> :: VDM type ( 1b == structured, 0b == unstructured )
> - * <14:13> :: Structured VDM version (can only be 00 == 1.0 currently)
> + * <14:13> :: Structured VDM version
> * <12:11> :: reserved
> * <10:8> :: object position (1-7 valid ... used for enter/exit mode only)
> * <7:6> :: command type (SVDM only?)
> * <5> :: reserved (SVDM), command type (UVDM)
> * <4:0> :: command
> */
> -#define VDO(vid, type, custom) \
> +#define VDO(vid, type, ver, custom) \
> (((vid) << 16) | \
> ((type) << 15) | \
> + ((ver) << 13) | \
> ((custom) & 0x7FFF))
>
> #define VDO_SVDM_TYPE (1 << 15)
> #define VDO_SVDM_VERS(x) ((x) << 13)
> #define VDO_OPOS(x) ((x) << 8)
> #define VDO_CMDT(x) ((x) << 6)
> +#define VDO_SVDM_VERS_MASK VDO_SVDM_VERS(0x3)
> #define VDO_OPOS_MASK VDO_OPOS(0x7)
> #define VDO_CMDT_MASK VDO_CMDT(0x3)
>
> @@ -74,6 +76,7 @@
>
> #define PD_VDO_VID(vdo) ((vdo) >> 16)
> #define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1)
> +#define PD_VDO_SVDM_VER(vdo) (((vdo) >> 13) & 0x3)
> #define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7)
> #define PD_VDO_CMD(vdo) ((vdo) & 0x1f)
> #define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3)
> @@ -103,34 +106,46 @@
> * --------------------
> * <31> :: data capable as a USB host
> * <30> :: data capable as a USB device
> - * <29:27> :: product type (UFP / Cable)
> + * <29:27> :: product type (UFP / Cable / VPD)
> * <26> :: modal operation supported (1b == yes)
> - * <25:16> :: product type (DFP)
> + * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in
> version 1.0)
> + * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in
> version 1.0)
> + * <20:16> :: Reserved, Shall be set to zero
> * <15:0> :: USB-IF assigned VID for this cable vendor
> */
> -#define IDH_PTYPE_UNDEF 0
> +/* SOP Product Type (UFP) */
> +#define IDH_PTYPE_NOT_UFP 0
> #define IDH_PTYPE_HUB 1
> #define IDH_PTYPE_PERIPH 2
> #define IDH_PTYPE_PSD 3
> #define IDH_PTYPE_AMA 5
>
> +/* SOP' Product Type (Cable Plug / VPD) */
> +#define IDH_PTYPE_NOT_CABLE 0
> #define IDH_PTYPE_PCABLE 3
> #define IDH_PTYPE_ACABLE 4
> +#define IDH_PTYPE_VPD 6
>
> -#define IDH_PTYPE_DFP_UNDEF 0
> +/* SOP Product Type (DFP) */
> +#define IDH_PTYPE_NOT_DFP 0
> #define IDH_PTYPE_DFP_HUB 1
> #define IDH_PTYPE_DFP_HOST 2
> #define IDH_PTYPE_DFP_PB 3
> -#define IDH_PTYPE_DFP_AMC 4
>
> -#define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \
> - ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \
> - | (is_modal) << 26 | ((vid) & 0xffff))
> +/* ID Header Mask */
> +#define IDH_DFP_MASK GENMASK(25, 23)
> +#define IDH_CONN_MASK GENMASK(22, 21)
> +
> +#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid)
> \
> + ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27
> \
> + | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21
> \
> + | ((vid) & 0xffff))
>
> #define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7)
> #define PD_IDH_VID(vdo) ((vdo) & 0xffff)
> #define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26))
> #define PD_IDH_DFP_PTYPE(vdo) (((vdo) >> 23) & 0x7)
> +#define PD_IDH_CONN_TYPE(vdo) (((vdo) >> 21) & 0x3)
>
> /*
> * Cert Stat VDO
> @@ -138,6 +153,7 @@
> * <31:0> : USB-IF assigned XID for this cable
> */
> #define PD_CSTAT_XID(vdo) (vdo)
> +#define VDO_CERT(xid) ((xid) & 0xffffffff)
>
> /*
> * Product VDO
> @@ -149,112 +165,267 @@
> #define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff)
>
> /*
> - * UFP VDO1
> + * UFP VDO (PD Revision 3.0+ only)
> * --------
> * <31:29> :: UFP VDO version
> * <28> :: Reserved
> * <27:24> :: Device capability
> - * <23:6> :: Reserved
> + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
> + * <21:11> :: Reserved
> + * <10:8> :: Vconn power (AMA only)
> + * <7> :: Vconn required (AMA only, 0b == no, 1b == yes)
> + * <6> :: Vbus required (AMA only, 0b == yes, 1b == no)
> * <5:3> :: Alternate modes
> * <2:0> :: USB highest speed
> */
> -#define PD_VDO1_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24)
> +#define PD_VDO_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24)
> +
> +/* UFP VDO Version */
> +#define UFP_VDO_VER1_2 2
>
> +/* Device Capability */
> #define DEV_USB2_CAPABLE BIT(0)
> #define DEV_USB2_BILLBOARD BIT(1)
> #define DEV_USB3_CAPABLE BIT(2)
> #define DEV_USB4_CAPABLE BIT(3)
>
> +/* Connector Type */
> +#define UFP_RECEPTACLE 2
> +#define UFP_CAPTIVE 3
> +
> +/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required)
> */
> +#define AMA_VCONN_PWR_1W 0
> +#define AMA_VCONN_PWR_1W5 1
> +#define AMA_VCONN_PWR_2W 2
> +#define AMA_VCONN_PWR_3W 3
> +#define AMA_VCONN_PWR_4W 4
> +#define AMA_VCONN_PWR_5W 5
> +#define AMA_VCONN_PWR_6W 6
> +
> +/* Vconn Required (AMA only) */
> +#define AMA_VCONN_NOT_REQ 0
> +#define AMA_VCONN_REQ 1
> +
> +/* Vbus Required (AMA only) */
> +#define AMA_VBUS_REQ 0
> +#define AMA_VBUS_NOT_REQ 1
> +
> +/* Alternate Modes */
> +#define UFP_ALTMODE_NOT_SUPP 0
> +#define UFP_ALTMODE_TBT3 BIT(0)
> +#define UFP_ALTMODE_RECFG BIT(1)
> +#define UFP_ALTMODE_NO_RECFG BIT(2)
> +
> +/* USB Highest Speed */
> +#define UFP_USB2_ONLY 0
> +#define UFP_USB32_GEN1 1
> +#define UFP_USB32_4_GEN2 2
> +#define UFP_USB4_GEN3 3
> +
> +#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd)
> \
> + (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22
> \
> + | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3
> \
> + | ((spd) & 0x7))
> +
> /*
> - * DFP VDO
> + * DFP VDO (PD Revision 3.0+ only)
> * --------
> * <31:29> :: DFP VDO version
> * <28:27> :: Reserved
> * <26:24> :: Host capability
> - * <23:5> :: Reserved
> + * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
> + * <21:5> :: Reserved
> * <4:0> :: Port number
> */
> #define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24)
>
> +#define DFP_VDO_VER1_1 1
> #define HOST_USB2_CAPABLE BIT(0)
> #define HOST_USB3_CAPABLE BIT(1)
> #define HOST_USB4_CAPABLE BIT(2)
> +#define DFP_RECEPTACLE 2
> +#define DFP_CAPTIVE 3
> +
> +#define VDO_DFP(ver, cap, conn, pnum)
> \
> + (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22
> \
> + | ((pnum) & 0x1f))
>
> /*
> - * Cable VDO
> + * Passive Cable VDO
> * ---------
> * <31:28> :: Cable HW version
> * <27:24> :: Cable FW version
> - * <23:20> :: Reserved, Shall be set to zero
> - * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11
> == Captive)
> - * <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
> + * <23:21> :: VDO version
> + * <20> :: Reserved, Shall be set to zero
> + * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
> + * <17> :: Reserved, Shall be set to zero
> * <16:13> :: cable latency (0001 == <10ns(~1m length))
> - * <12:11> :: cable termination type (11b == both ends active VCONN req)
> - * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
> - * <9> :: SSTX2 Directionality support
> - * <8> :: SSRX1 Directionality support
> - * <7> :: SSRX2 Directionality support
> - * <6:5> :: Vbus current handling capability
> + * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
> + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b
> == 50V)
> + * <8:7> :: Reserved, Shall be set to zero
> + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
> + * <4:3> :: Reserved, Shall be set to zero
> + * <2:0> :: USB highest speed
> + *
> + * Active Cable VDO 1
> + * ---------
> + * <31:28> :: Cable HW version
> + * <27:24> :: Cable FW version
> + * <23:21> :: VDO version
> + * <20> :: Reserved, Shall be set to zero
> + * <19:18> :: Connector type (10b == C, 11b == Captive)
> + * <17> :: Reserved, Shall be set to zero
> + * <16:13> :: cable latency (0001 == <10ns(~1m length))
> + * <12:11> :: cable termination type (10b == one end active, 11b == both
> ends active VCONN req)
> + * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b
> == 50V)
> + * <8> :: SBU supported (0b == supported, 1b == not supported)
> + * <7> :: SBU type (0b == passive, 1b == active)
> + * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
> * <4> :: Vbus through cable (0b == no, 1b == yes)
> * <3> :: SOP" controller present? (0b == no, 1b == yes)
> - * <2:0> :: USB SS Signaling support
> + * <2:0> :: USB highest speed
> */
> -#define CABLE_ATYPE 0
> -#define CABLE_BTYPE 1
> +/* Cable VDO Version */
> +#define CABLE_VDO_VER1_0 0
> +#define CABLE_VDO_VER1_3 3
> +
> +/* Connector Type */
> #define CABLE_CTYPE 2
> #define CABLE_CAPTIVE 3
> -#define CABLE_PLUG 0
> -#define CABLE_RECEPTACLE 1
> -#define CABLE_CURR_1A5 0
> +
> +/* Cable Latency */
> +#define CABLE_LATENCY_1M 1
> +#define CABLE_LATENCY_2M 2
> +#define CABLE_LATENCY_3M 3
> +#define CABLE_LATENCY_4M 4
> +#define CABLE_LATENCY_5M 5
> +#define CABLE_LATENCY_6M 6
> +#define CABLE_LATENCY_7M 7
> +#define CABLE_LATENCY_7M_PLUS 8
> +
> +/* Cable Termination Type */
> +#define PCABLE_VCONN_NOT_REQ 0
> +#define PCABLE_VCONN_REQ 1
> +#define ACABLE_ONE_END 2
> +#define ACABLE_BOTH_END 3
> +
> +/* Maximum Vbus Voltage */
> +#define CABLE_MAX_VBUS_20V 0
> +#define CABLE_MAX_VBUS_30V 1
> +#define CABLE_MAX_VBUS_40V 2
> +#define CABLE_MAX_VBUS_50V 3
> +
> +/* Active Cable SBU Supported/Type */
> +#define ACABLE_SBU_SUPP 0
> +#define ACABLE_SBU_NOT_SUPP 1
> +#define ACABLE_SBU_PASSIVE 0
> +#define ACABLE_SBU_ACTIVE 1
> +
> +/* Vbus Current Handling Capability */
> +#define CABLE_CURR_DEF 0
> #define CABLE_CURR_3A 1
> #define CABLE_CURR_5A 2
> -#define CABLE_USBSS_U2_ONLY 0
> -#define CABLE_USBSS_U31_GEN1 1
> -#define CABLE_USBSS_U31_GEN2 2
> -#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\
> - vps, sopp, usbss) \
> - (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \
> - | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 \
> - | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \
> - | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \
> - | ((usbss) & 0x7))
> +
> +/* USB Highest Speed */
> +#define CABLE_USB2_ONLY 0
> +#define CABLE_USB32_GEN1 1
> +#define CABLE_USB32_4_GEN2 2
> +#define CABLE_USB4_GEN3 3
> +
> +#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)
> \
> + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21
> \
> + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11
> \
> + | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7))
> +#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt,
> sopp, spd) \
> + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21
> \
> + | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11
> \
> + | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5
> \
> + | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7))
> +
> #define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3)
>
> /*
> - * AMA VDO
> + * Active Cable VDO 2
> * ---------
> - * <31:28> :: Cable HW version
> - * <27:24> :: Cable FW version
> - * <23:12> :: Reserved, Shall be set to zero
> - * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
> - * <10> :: SSTX2 Directionality support
> - * <9> :: SSRX1 Directionality support
> - * <8> :: SSRX2 Directionality support
> - * <7:5> :: Vconn power
> - * <4> :: Vconn power required
> - * <3> :: Vbus power required
> - * <2:0> :: USB SS Signaling support
> + * <31:24> :: Maximum operating temperature
> + * <23:16> :: Shutdown temperature
> + * <15> :: Reserved, Shall be set to zero
> + * <14:12> :: U3/CLd power
> + * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
> + * <10> :: Physical connection (0b == copper, 1b == optical)
> + * <9> :: Active element (0b == redriver, 1b == retimer)
> + * <8> :: USB4 supported (0b == yes, 1b == no)
> + * <7:6> :: USB2 hub hops consumed
> + * <5> :: USB2 supported (0b == yes, 1b == no)
> + * <4> :: USB3.2 supported (0b == yes, 1b == no)
> + * <3> :: USB lanes supported (0b == one lane, 1b == two lanes)
> + * <2> :: Optically isolated active cable (0b == no, 1b == yes)
> + * <1> :: Reserved, Shall be set to zero
> + * <0> :: USB gen (0b == gen1, 1b == gen2+)
> */
> -#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
> - (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \
> - | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \
> - | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \
> - | ((usbss) & 0x7))
> -
> -#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1)
> -#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1)
> +/* U3/CLd Power*/
> +#define ACAB2_U3_CLD_10MW_PLUS 0
> +#define ACAB2_U3_CLD_10MW 1
> +#define ACAB2_U3_CLD_5MW 2
> +#define ACAB2_U3_CLD_1MW 3
> +#define ACAB2_U3_CLD_500UW 4
> +#define ACAB2_U3_CLD_200UW 5
> +#define ACAB2_U3_CLD_50UW 6
> +
> +/* Other Active Cable VDO 2 Fields */
> +#define ACAB2_U3U0_DIRECT 0
> +#define ACAB2_U3U0_U3S 1
> +#define ACAB2_PHY_COPPER 0
> +#define ACAB2_PHY_OPTICAL 1
> +#define ACAB2_REDRIVER 0
> +#define ACAB2_RETIMER 1
> +#define ACAB2_USB4_SUPP 0
> +#define ACAB2_USB4_NOT_SUPP 1
> +#define ACAB2_USB2_SUPP 0
> +#define ACAB2_USB2_NOT_SUPP 1
> +#define ACAB2_USB32_SUPP 0
> +#define ACAB2_USB32_NOT_SUPP 1
> +#define ACAB2_LANES_ONE 0
> +#define ACAB2_LANES_TWO 1
> +#define ACAB2_OPT_ISO_NO 0
> +#define ACAB2_OPT_ISO_YES 1
> +#define ACAB2_GEN_1 0
> +#define ACAB2_GEN_2_PLUS 1
> +
> +#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32,
> lane, iso, gen) \
> + (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12
> \
> + | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8
> \
> + | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3
> \
> + | (iso) << 2 | (gen))
>
> -#define AMA_VCONN_PWR_1W 0
> -#define AMA_VCONN_PWR_1W5 1
> -#define AMA_VCONN_PWR_2W 2
> -#define AMA_VCONN_PWR_3W 3
> -#define AMA_VCONN_PWR_4W 4
> -#define AMA_VCONN_PWR_5W 5
> -#define AMA_VCONN_PWR_6W 6
> -#define AMA_USBSS_U2_ONLY 0
> -#define AMA_USBSS_U31_GEN1 1
> -#define AMA_USBSS_U31_GEN2 2
> -#define AMA_USBSS_BBONLY 3
> +/*
> + * VPD VDO
> + * ---------
> + * <31:28> :: HW version
> + * <27:24> :: FW version
> + * <23:21> :: VDO version
> + * <20:17> :: Reserved, Shall be set to zero
> + * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b
> == 50V)
> + * <14> :: Charge through current support (0b == 3A, 1b == 5A)
> + * <13> :: Reserved, Shall be set to zero
> + * <12:7> :: Vbus impedance
> + * <6:1> :: Ground impedance
> + * <0> :: Charge through support (0b == no, 1b == yes)
> + */
> +#define VPD_VDO_VER1_0 0
> +#define VPD_MAX_VBUS_20V 0
> +#define VPD_MAX_VBUS_30V 1
> +#define VPD_MAX_VBUS_40V 2
> +#define VPD_MAX_VBUS_50V 3
> +#define VPDCT_CURR_3A 0
> +#define VPDCT_CURR_5A 1
> +#define VPDCT_NOT_SUPP 0
> +#define VPDCT_SUPP 1
> +
> +#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \
> + (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \
> + | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \
> + | ((gi) & 0x3f) << 1 | (ct))
>
> /*
> * SVDM Discover SVIDs request -> response
> diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
> index 54475323f83b..30b640292325 100644
> --- a/include/linux/usb/typec.h
> +++ b/include/linux/usb/typec.h
> @@ -206,12 +206,19 @@ struct typec_operations {
> enum typec_port_type type);
> };
>
> +enum usb_pd_svdm_ver {
> + SVDM_VER_1_0 = 0,
> + SVDM_VER_2_0 = 1,
> + SVDM_VER_MAX = SVDM_VER_2_0,
> +};
> +
> /*
> * struct typec_capability - USB Type-C Port Capabilities
> * @type: Supported power role of the port
> * @data: Supported data role of the port
> * @revision: USB Type-C Specification release. Binary coded decimal
> * @pd_revision: USB Power Delivery Specification revision if supported
> + * @svdm_version: USB PD Structured VDM version if supported
> * @prefer_role: Initial role preference (DRP ports).
> * @accessory: Supported Accessory Modes
> * @fwnode: Optional fwnode of the port
> @@ -225,6 +232,7 @@ struct typec_capability {
> enum typec_port_data data;
> u16 revision; /* 0120H = "1.2" */
> u16 pd_revision; /* 0300H = "3.0" */
> + enum usb_pd_svdm_ver svdm_version;
> int prefer_role;
> enum typec_accessory accessory[TYPEC_MAX_ACCESSORY];
> unsigned int orientation_aware:1;
> @@ -275,4 +283,6 @@ int typec_find_orientation(const char *name);
> int typec_find_port_power_role(const char *name);
> int typec_find_power_role(const char *name);
> int typec_find_port_data_role(const char *name);
> +void typec_set_svdm_version(struct typec_port *port, enum usb_pd_svdm_ver);
> +enum usb_pd_svdm_ver typec_get_svdm_version(struct typec_port *port);
> #endif /* __LINUX_USB_TYPEC_H */
>
