On Thu, 2021-01-28 at 15:59 +0800, Yongqiang Niu wrote:
> On Thu, 2021-01-28 at 15:42 +0800, CK Hu wrote:
> > Hi, Hsin-Yi:
> >
> > On Thu, 2021-01-28 at 15:28 +0800, Hsin-Yi Wang wrote:
> > > From: Yongqiang Niu <yongqiang....@mediatek.com>
> > >
> > > for 5 or 6 bpc panel, we need enable dither function
> > > to improve the display quality
> > >
> > > Signed-off-by: Yongqiang Niu <yongqiang....@mediatek.com>
> > > Signed-off-by: Hsin-Yi Wang <hsi...@chromium.org>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 44 ++++++++++++++++++++-
> > > 1 file changed, 43 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > index 8173f709272be..e85625704d611 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > @@ -53,7 +53,9 @@
> > > #define DITHER_EN BIT(0)
> > > #define DISP_DITHER_CFG 0x0020
> > > #define DITHER_RELAY_MODE BIT(0)
> > > +#define DITHER_ENGINE_EN BIT(1)
> > > #define DISP_DITHER_SIZE 0x0030
> > > +#define DITHER_REG(idx) (0x100 + (idx) * 4)
> > >
> > > #define LUT_10BIT_MASK 0x03ff
> > >
> > > @@ -313,8 +315,48 @@ static void mtk_dither_config(struct device *dev,
> > > unsigned int w,
> > > {
> > > struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> > >
> > > + bool enable = false;
> > > +
> > > + /* default value for dither reg 5 to 14 */
> > > + const u32 dither_setting[] = {
> > > + 0x00000000, /* 5 */
> > > + 0x00003002, /* 6 */
> > > + 0x00000000, /* 7 */
> > > + 0x00000000, /* 8 */
> > > + 0x00000000, /* 9 */
> > > + 0x00000000, /* 10 */
> > > + 0x00000000, /* 11 */
> > > + 0x00000011, /* 12 */
> > > + 0x00000000, /* 13 */
> > > + 0x00000000, /* 14 */
> >
> > Could you explain what is this?
>
> this is dither 5 to dither 14 setting
> this will be useless, we just need set dither 5 and dither 7 like
> mtk_ddp_write(cmdq_pkt, 0, comp, DISP_DITHER_5);
> mtk_ddp_write(cmdq_pkt, 0, comp, DISP_DITHER_7);
> other value is same with hardware default value.
>
>
> >
> > > + };
> > > +
> > > + if (bpc == 5 || bpc == 6) {
> > > + enable = true;
> > > + mtk_ddp_write(cmdq_pkt,
> > > + DITHER_LSB_ERR_SHIFT_R(MTK_MAX_BPC - bpc) |
> > > + DITHER_ADD_LSHIFT_R(MTK_MAX_BPC - bpc) |
> > > + DITHER_NEW_BIT_MODE,
> > > + &priv->cmdq_reg, priv->regs, DITHER_REG(15));
> > > + mtk_ddp_write(cmdq_pkt,
> > > + DITHER_LSB_ERR_SHIFT_B(MTK_MAX_BPC - bpc) |
> > > + DITHER_ADD_LSHIFT_B(MTK_MAX_BPC - bpc) |
> > > + DITHER_LSB_ERR_SHIFT_G(MTK_MAX_BPC - bpc) |
> > > + DITHER_ADD_LSHIFT_G(MTK_MAX_BPC - bpc),
> >
> > This result in 0x50505050, but previous version is 0x50504040, so this
> > version is correct and previous version is incorrect?
>
> the new version set r g b 3 channel same, seams more reasonable
>
>
So all the setting of DISP_DITHER_5, DISP_DITHER_7, DISP_DITHER_15,
DISP_DITHER_16 is identical to mtk_dither_set(), so call
mtk_dither_set() instead of duplication here.
Regards,
CK
> >
> > Regards,
> > CK
> >
> > > + &priv->cmdq_reg, priv->regs, DITHER_REG(16));
> > > + }
> > > +
> > > +
> > > + if (enable) {
> > > + u32 idx;
> > > +
> > > + for (idx = 0; idx < ARRAY_SIZE(dither_setting); idx++)
> > > + mtk_ddp_write(cmdq_pkt, dither_setting[idx],
> > > &priv->cmdq_reg, priv->regs,
> > > + DITHER_REG(idx + 5));
> > > + }
> > > +
> > > mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> > > DISP_DITHER_SIZE);
> > > - mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs,
> > > DISP_DITHER_CFG);
> > > + mtk_ddp_write(cmdq_pkt, enable ? DITHER_ENGINE_EN :
> > > DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> > > }
> > >
> > > static void mtk_dither_start(struct device *dev)
> >
> >
>
>
