On 1/18/2021 9:34 PM, Rayagonda Kokatanur wrote:
> From: Bharat Gooty <bharat.go...@broadcom.com>
>
> Add a non-empty dma-ranges so that dma address translation
> happens.
>
> Fixes: 2013a4b684b6 ("arm64: dts: broadcom: clear the warnings caused by
> empty dma-ranges")
>
> Signed-off-by: Bharat Gooty <bharat.go...@broadcom.com>
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokata...@broadcom.com>
> ---
> arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
> b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
> index aef8f2b00778..5401a646c840 100644
> --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
> @@ -4,11 +4,16 @@
> */
> usb {
> compatible = "simple-bus";
> - dma-ranges;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
>
> + /*
> + * Internally, USB bus to the interconnect can only address up
> + * to 40-bit
> + */
> + dma-ranges = <0 0 0 0 0x100 0x0>;
> +
Should have had my signed-off since during our internal review, I added
the above comment to explain why we set it to 40-bit here despite the
USB controller itself is capable of addressing 64-bit as Arnd pointed out.
Well, the following ack should do it too, thanks.
Acked-by: Ray Jui <ray....@broadcom.com>
> usbphy0: usb-phy@0 {
> compatible = "brcm,sr-usb-combo-phy";
> reg = <0x0 0x00000000 0x0 0x100>;
>
smime.p7s
Description: S/MIME Cryptographic Signature
