[ added Linus to Cc: ]
On Monday 24 December 2007, Bartlomiej Zolnierkiewicz wrote:
>
> cmd64x regression bugfix, few obvious ide-cd fixes from the "redux" patch
> peries and ide-cd MAINTAINERS entry update (Borislav, welcome on board!).
>
> Oh yes, I would forget...
>
> Merry Christmas!
Well, I forgot to send this to Linus instead... :-)
> Linus, please pull from:
>
> master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
>
> to receive the following updates:
>
> MAINTAINERS | 4 ++-
> drivers/ide/ide-cd.c | 66 +++++++++++++++++++++++----------------------
> drivers/ide/ide-cd.h | 3 +-
> drivers/ide/pci/cmd64x.c | 4 +-
> drivers/ide/pci/cs5535.c | 2 +-
> 5 files changed, 42 insertions(+), 37 deletions(-)
>
>
> Bartlomiej Zolnierkiewicz (10):
> ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
> ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
> ide-cd: use ide_cd_release() in ide_cd_probe()
> ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
> ide-cd: add missing 'ireason' masking to cdrom_write_intr()
> ide-cd: fix error messages in cdrom_write_intr()
> ide-cd: add error message for DMA error to cdrom_read_intr()
> ide-cd: fix error message in cdrom_pc_intr()
> ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
> cmd64x: fix hwif->chipset setup
>
> Borislav Petkov (1):
> MAINTAINERS: update ide-cd entry
>
> Joe Perches (1):
> drivers/ide/: Spelling fixes
>
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3d567fd..79c711e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1870,8 +1870,10 @@ T: quilt
> kernel.org/pub/linux/kernel/people/bart/pata-2.6/
> S: Maintained
>
> IDE/ATAPI CDROM DRIVER
> +P: Borislav Petkov
> +M: [EMAIL PROTECTED]
> L: [EMAIL PROTECTED]
> -S: Unmaintained
> +S: Maintained
>
> IDE/ATAPI FLOPPY DRIVERS
> P: Paul Bristow
> diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
> index 92ac658..c7d77f0 100644
> --- a/drivers/ide/ide-cd.c
> +++ b/drivers/ide/ide-cd.c
> @@ -1068,8 +1068,8 @@ int cdrom_read_check_ireason (ide_drive_t *drive, int
> len, int ireason)
> return 0;
> else if (ireason == 0) {
> /* Whoops... The drive is expecting to receive data from us! */
> - printk(KERN_ERR "%s: read_intr: Drive wants to transfer data
> the "
> - "wrong way!\n", drive->name);
> + printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
> + drive->name, __FUNCTION__);
>
> /* Throw some data at the drive so it doesn't hang
> and quit this request. */
> @@ -1086,8 +1086,8 @@ int cdrom_read_check_ireason (ide_drive_t *drive, int
> len, int ireason)
> return 0;
> } else {
> /* Drive wants a command packet, or invalid ireason... */
> - printk(KERN_ERR "%s: read_intr: bad interrupt reason %x\n",
> drive->name,
> - ireason);
> + printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
> + drive->name, __FUNCTION__, ireason);
> }
>
> cdrom_end_request(drive, 0);
> @@ -1112,8 +1112,11 @@ static ide_startstop_t cdrom_read_intr (ide_drive_t
> *drive)
> */
> if (dma) {
> info->dma = 0;
> - if ((dma_error = HWIF(drive)->ide_dma_end(drive)))
> + dma_error = HWIF(drive)->ide_dma_end(drive);
> + if (dma_error) {
> + printk(KERN_ERR "%s: DMA read error\n", drive->name);
> ide_dma_off(drive);
> + }
> }
>
> if (cdrom_decode_status(drive, 0, &stat))
> @@ -1443,7 +1446,7 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t
> *drive)
> return ide_stopped;
>
> /* Read the interrupt reason and the transfer length. */
> - ireason = HWIF(drive)->INB(IDE_IREASON_REG);
> + ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
> lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
> highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
>
> @@ -1484,7 +1487,7 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t
> *drive)
> if (thislen > len) thislen = len;
>
> /* The drive wants to be written to. */
> - if ((ireason & 3) == 0) {
> + if (ireason == 0) {
> if (!rq->data) {
> blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
> goto confused;
> @@ -1506,9 +1509,9 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t
> *drive)
> }
>
> /* Same drill for reading. */
> - else if ((ireason & 3) == 2) {
> + else if (ireason == 2) {
> if (!rq->data) {
> - blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
> + blk_dump_rq_flags(rq, "cdrom_pc_intr, read");
> goto confused;
> }
> /* Transfer the data. */
> @@ -1632,8 +1635,8 @@ static int cdrom_write_check_ireason(ide_drive_t
> *drive, int len, int ireason)
> return 0;
> else if (ireason == 2) {
> /* Whoops... The drive wants to send data. */
> - printk(KERN_ERR "%s: write_intr: wrong transfer direction!\n",
> - drive->name);
> + printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
> + drive->name, __FUNCTION__);
>
> while (len > 0) {
> int dum = 0;
> @@ -1642,8 +1645,8 @@ static int cdrom_write_check_ireason(ide_drive_t
> *drive, int len, int ireason)
> }
> } else {
> /* Drive wants a command packet, or invalid ireason... */
> - printk(KERN_ERR "%s: write_intr: bad interrupt reason %x\n",
> - drive->name, ireason);
> + printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
> + drive->name, __FUNCTION__, ireason);
> }
>
> cdrom_end_request(drive, 0);
> @@ -1805,8 +1808,9 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t
> *drive)
> /* Check for errors. */
> if (dma) {
> info->dma = 0;
> - if ((dma_error = HWIF(drive)->ide_dma_end(drive))) {
> - printk(KERN_ERR "ide-cd: write dma error\n");
> + dma_error = HWIF(drive)->ide_dma_end(drive);
> + if (dma_error) {
> + printk(KERN_ERR "%s: DMA write error\n", drive->name);
> ide_dma_off(drive);
> }
> }
> @@ -1826,7 +1830,7 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t
> *drive)
> }
>
> /* Read the interrupt reason and the transfer length. */
> - ireason = HWIF(drive)->INB(IDE_IREASON_REG);
> + ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
> lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
> highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
>
> @@ -1839,8 +1843,9 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t
> *drive)
> */
> uptodate = 1;
> if (rq->current_nr_sectors > 0) {
> - printk(KERN_ERR "%s: write_intr: data underrun (%d
> blocks)\n",
> - drive->name, rq->current_nr_sectors);
> + printk(KERN_ERR "%s: %s: data underrun (%d blocks)\n",
> + drive->name, __FUNCTION__,
> + rq->current_nr_sectors);
> uptodate = 0;
> }
> cdrom_end_request(drive, uptodate);
> @@ -1860,7 +1865,8 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t
> *drive)
> int this_transfer;
>
> if (!rq->current_nr_sectors) {
> - printk(KERN_ERR "ide-cd: write_intr: oops\n");
> + printk(KERN_ERR "%s: %s: confused, missing data\n",
> + drive->name, __FUNCTION__);
> break;
> }
>
> @@ -2688,14 +2694,14 @@ void ide_cdrom_update_speed (ide_drive_t *drive,
> struct atapi_capabilities_page
> if (!drive->id->model[0] &&
> !strncmp(drive->id->fw_rev, "241N", 4)) {
> CDROM_STATE_FLAGS(drive)->current_speed =
> - (((unsigned int)cap->curspeed) + (176/2)) / 176;
> + (le16_to_cpu(cap->curspeed) + (176/2)) / 176;
> CDROM_CONFIG_FLAGS(drive)->max_speed =
> - (((unsigned int)cap->maxspeed) + (176/2)) / 176;
> + (le16_to_cpu(cap->maxspeed) + (176/2)) / 176;
> } else {
> CDROM_STATE_FLAGS(drive)->current_speed =
> - (ntohs(cap->curspeed) + (176/2)) / 176;
> + (be16_to_cpu(cap->curspeed) + (176/2)) / 176;
> CDROM_CONFIG_FLAGS(drive)->max_speed =
> - (ntohs(cap->maxspeed) + (176/2)) / 176;
> + (be16_to_cpu(cap->maxspeed) + (176/2)) / 176;
> }
> }
>
> @@ -2909,6 +2915,9 @@ static int ide_cdrom_register (ide_drive_t *drive, int
> nslots)
> if (!CDROM_CONFIG_FLAGS(drive)->ram)
> devinfo->mask |= CDC_RAM;
>
> + if (CDROM_CONFIG_FLAGS(drive)->no_speed_select)
> + devinfo->mask |= CDC_SELECT_SPEED;
> +
> devinfo->disk = info->disk;
> return register_cdrom(devinfo);
> }
> @@ -3161,7 +3170,7 @@ int ide_cdrom_setup (ide_drive_t *drive)
> CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
> /* the 3231 model does not support the SET_CD_SPEED command */
> else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
> - cdi->mask |= CDC_SELECT_SPEED;
> + CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1;
>
> #if ! STANDARD_ATAPI
> /* by default Sanyo 3 CD changer support is turned off and
> @@ -3504,15 +3513,8 @@ static int ide_cd_probe(ide_drive_t *drive)
> g->driverfs_dev = &drive->gendev;
> g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
> if (ide_cdrom_setup(drive)) {
> - struct cdrom_device_info *devinfo = &info->devinfo;
> ide_proc_unregister_driver(drive, &ide_cdrom_driver);
> - kfree(info->buffer);
> - kfree(info->toc);
> - kfree(info->changer_info);
> - if (devinfo->handle == drive && unregister_cdrom(devinfo))
> - printk (KERN_ERR "%s: ide_cdrom_cleanup failed to
> unregister device from the cdrom
> driver.\n", drive->name);
> - kfree(info);
> - drive->driver_data = NULL;
> + ide_cd_release(&info->kref);
> goto failed;
> }
>
> diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
> index 228b29c..1b302fe 100644
> --- a/drivers/ide/ide-cd.h
> +++ b/drivers/ide/ide-cd.h
> @@ -91,7 +91,8 @@ struct ide_cd_config_flags {
> __u8 close_tray : 1; /* can close the tray */
> __u8 writing : 1; /* pseudo write in progress */
> __u8 mo_drive : 1; /* drive is an MO device */
> - __u8 reserved : 2;
> + __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */
> + __u8 reserved : 1;
> byte max_speed; /* Max speed of the drive */
> };
> #define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info
> *)(drive->driver_data))->config_flags))
> diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
> index 51fca44..bc55333 100644
> --- a/drivers/ide/pci/cmd64x.c
> +++ b/drivers/ide/pci/cmd64x.c
> @@ -1,5 +1,5 @@
> /*
> - * linux/drivers/ide/pci/cmd64x.c Version 1.51 Nov 8, 2007
> + * linux/drivers/ide/pci/cmd64x.c Version 1.52 Dec 24, 2007
> *
> * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
> * Due to massive hardware bugs, UltraDMA is only supported
> @@ -564,6 +564,7 @@ static const struct ide_port_info cmd64x_chipsets[]
> __devinitdata = {
> .init_chipset = init_chipset_cmd64x,
> .init_hwif = init_hwif_cmd64x,
> .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
> + .chipset = ide_cmd646,
> .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
> .pio_mask = ATA_PIO5,
> .mwdma_mask = ATA_MWDMA2,
> @@ -573,7 +574,6 @@ static const struct ide_port_info cmd64x_chipsets[]
> __devinitdata = {
> .init_chipset = init_chipset_cmd64x,
> .init_hwif = init_hwif_cmd64x,
> .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
> - .chipset = ide_cmd646,
> .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
> .pio_mask = ATA_PIO5,
> .mwdma_mask = ATA_MWDMA2,
> diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
> index 9094916..ddcbeba 100644
> --- a/drivers/ide/pci/cs5535.c
> +++ b/drivers/ide/pci/cs5535.c
> @@ -49,7 +49,7 @@
> #define ATAC_BM0_PRD 0x04
> #define CS5535_CABLE_DETECT 0x48
>
> -/* Format I PIO settings. We seperate out cmd and data for safer timings */
> +/* Format I PIO settings. We separate out cmd and data for safer timings */
>
> static unsigned int cs5535_pio_cmd_timings[5] =
> { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
