Add one sysfs node to monitor driver layer performance data. One can
manipulate it to get performance related statistics during runtime.
Signed-off-by: Can Guo <c...@codeaurora.org>
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 2206b1e..5303ce9 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -42,6 +42,7 @@ static struct ufs_qcom_host
*ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
u32 clk_cycles);
+static int ufs_qcom_init_sysfs(struct ufs_hba *hba);
static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev
*rcd)
{
@@ -1088,6 +1089,8 @@ static int ufs_qcom_init(struct ufs_hba *hba)
err = 0;
}
+ ufs_qcom_init_sysfs(hba);
+
goto out;
out_variant_clear:
@@ -1453,6 +1456,85 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba
*hba,
}
#endif
+static inline int ufs_qcom_opcode_rw_dir(u8 opcode)
+{
+ if (opcode == READ_6 || opcode == READ_10 || opcode == READ_16)
+ return READ;
+ else if (opcode == WRITE_6 || opcode == WRITE_10 || opcode == WRITE_16)
+ return WRITE;
+ else
+ return -EINVAL;
+}
+
+static inline bool ufs_qcom_should_start_monitor(struct ufs_qcom_host *host,
+ struct ufshcd_lrb *lrbp)
+{
+ return (host->monitor.enabled && lrbp && lrbp->cmd &&
+ ktime_before(host->monitor.enabled_ts, lrbp->issue_time_stamp));
+}
+
+static void ufs_qcom_monitor_start_busy(struct ufs_hba *hba, int tag)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufshcd_lrb *lrbp;
+ int dir;
+
+ lrbp = &hba->lrb[tag];
+ if (ufs_qcom_should_start_monitor(host, lrbp)) {
+ dir = ufs_qcom_opcode_rw_dir(*lrbp->cmd->cmnd);
+ if (dir >= 0 && host->monitor.nr_queued[dir]++ == 0)
+ host->monitor.busy_start_ts[dir] =
+ lrbp->issue_time_stamp;
+ }
+}
+
+static void ufs_qcom_update_monitor(struct ufs_hba *hba, int tag)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufshcd_lrb *lrbp;
+ int dir;
+
+ lrbp = &hba->lrb[tag];
+ if (ufs_qcom_should_start_monitor(host, lrbp)) {
+ dir = ufs_qcom_opcode_rw_dir(*lrbp->cmd->cmnd);
+ if (dir >= 0 && host->monitor.nr_queued[dir] > 0) {
+ struct request *req;
+ struct ufs_qcom_perf_monitor *mon;
+ ktime_t now, inc, lat;
+
+ mon = &host->monitor;
+ req = lrbp->cmd->request;
+ mon->nr_sec_rw[dir] += blk_rq_sectors(req);
+ now = ktime_get();
+ inc = ktime_sub(now, mon->busy_start_ts[dir]);
+ mon->total_busy[dir] =
+ ktime_add(mon->total_busy[dir], inc);
+ /* push forward the busy start of monitor */
+ mon->busy_start_ts[dir] = now;
+ mon->nr_queued[dir]--;
+
+ /* update latencies */
+ mon->nr_req[dir]++;
+ lat = ktime_sub(now, lrbp->issue_time_stamp);
+ mon->lat_sum[dir] += lat;
+ if (mon->lat_max[dir] < lat || !mon->lat_max[dir])
+ mon->lat_max[dir] = lat;
+ if (mon->lat_min[dir] > lat || !mon->lat_min[dir])
+ mon->lat_min[dir] = lat;
+ }
+ }
+}
+
+static void ufs_qcom_setup_xfer_req(struct ufs_hba *hba, int tag, bool
is_scsi_cmd)
+{
+ ufs_qcom_monitor_start_busy(hba, tag);
+}
+
+static void ufs_qcom_compl_xfer_req(struct ufs_hba *hba, int tag, bool
is_scsi_cmd)
+{
+ ufs_qcom_update_monitor(hba, tag);
+}
+
/*
* struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
*
@@ -1476,8 +1558,112 @@ static const struct ufs_hba_variant_ops
ufs_hba_qcom_vops = {
.device_reset = ufs_qcom_device_reset,
.config_scaling_param = ufs_qcom_config_scaling_param,
.program_key = ufs_qcom_ice_program_key,
+ .setup_xfer_req = ufs_qcom_setup_xfer_req,
+ .compl_xfer_req = ufs_qcom_compl_xfer_req,
};
+static ssize_t monitor_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_qcom_perf_monitor *mon = &host->monitor;
+ unsigned long nr_sec_rd, nr_sec_wr, busy_us_rd, busy_us_wr;
+ unsigned long lat_max_rd, lat_min_rd, lat_sum_rd, lat_avg_rd, nr_req_rd;
+ unsigned long lat_max_wr, lat_min_wr, lat_sum_wr, lat_avg_wr, nr_req_wr;
+ bool is_enabled;
+
+ /*
+ * Don't lock the host lock since user needs to cat the entry very
+ * frequently during performance test, otherwise it may impact the
+ * performance.
+ */
+ is_enabled = mon->enabled;
+ if (!is_enabled)
+ goto print_usage;
+
+ nr_sec_rd = mon->nr_sec_rw[READ];
+ nr_sec_wr = mon->nr_sec_rw[WRITE];
+ busy_us_rd = ktime_to_us(mon->total_busy[READ]);
+ busy_us_wr = ktime_to_us(mon->total_busy[WRITE]);
+
+ nr_req_rd = mon->nr_req[READ];
+ lat_max_rd = ktime_to_us(mon->lat_max[READ]);
+ lat_min_rd = ktime_to_us(mon->lat_min[READ]);
+ lat_sum_rd = ktime_to_us(mon->lat_sum[READ]);
+ lat_avg_rd = lat_sum_rd / nr_req_rd;
+
+ nr_req_wr = mon->nr_req[WRITE];
+ lat_max_wr = ktime_to_us(mon->lat_max[WRITE]);
+ lat_min_wr = ktime_to_us(mon->lat_min[WRITE]);
+ lat_sum_wr = ktime_to_us(mon->lat_sum[WRITE]);
+ lat_avg_wr = lat_sum_wr / nr_req_wr;
+
+ return scnprintf(buf, PAGE_SIZE, "Read %lu %s %lu us, %lu %s max %lu |
min %lu | avg %lu | sum %lu\nWrite %lu %s %lu us, %lu %s max %lu | min %lu |
avg %lu | sum %lu\n",
+ nr_sec_rd, "sectors (in 512 bytes) in ", busy_us_rd,
+ nr_req_rd, "read reqs completed, latencies in us: ",
+ lat_max_rd, lat_min_rd, lat_avg_rd, lat_sum_rd,
+ nr_sec_wr, "sectors (in 512 bytes) in ", busy_us_wr,
+ nr_req_wr, "write reqs completed, latencies in us: ",
+ lat_max_wr, lat_min_wr, lat_avg_wr, lat_sum_wr);
+
+print_usage:
+ return scnprintf(buf, PAGE_SIZE, "%s\n%s",
+ "To start monitoring, echo 1 > monitor, cat monitor.",
+ "To stop monitoring, echo 0 > monitor.");
+}
+
+static ssize_t monitor_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ unsigned long value, flags;
+
+ if (kstrtoul(buf, 0, &value))
+ return -EINVAL;
+
+ value = !!value;
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (value == host->monitor.enabled)
+ goto out_unlock;
+
+ if (!value) {
+ memset(&host->monitor, 0, sizeof(host->monitor));
+ } else {
+ host->monitor.enabled = true;
+ host->monitor.enabled_ts = ktime_get();
+ }
+
+out_unlock:
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return count;
+}
+
+static DEVICE_ATTR_RW(monitor);
+
+static struct attribute *ufs_qcom_sysfs_attrs[] = {
+ &dev_attr_monitor.attr,
+ NULL
+};
+
+static const struct attribute_group ufs_qcom_sysfs_group = {
+ .name = "qcom",
+ .attrs = ufs_qcom_sysfs_attrs,
+};
+
+static int ufs_qcom_init_sysfs(struct ufs_hba *hba)
+{
+ int ret;
+
+ ret = sysfs_create_group(&hba->dev->kobj, &ufs_qcom_sysfs_group);
+ if (ret)
+ dev_err(hba->dev, "%s: Failed to create qcom sysfs group (err =
%d)\n",
+ __func__, ret);
+
+ return ret;
+}
+
/**
* ufs_qcom_probe - probe routine of the driver
* @pdev: pointer to Platform device handle
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 8208e3a..4c7e8ac 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -177,6 +177,23 @@ struct ufs_qcom_testbus {
struct gpio_desc;
+/* Host performance monitor */
+struct ufs_qcom_perf_monitor {
+ /* latencies*/
+ ktime_t lat_sum[2];
+ ktime_t lat_max[2];
+ ktime_t lat_min[2];
+ unsigned long nr_req[2];
+ unsigned long nr_sec_rw[2];
+
+ u32 nr_queued[2];
+ ktime_t busy_start_ts[2];
+ ktime_t total_busy[2];
+
+ ktime_t enabled_ts;
+ bool enabled;
+};
+
struct ufs_qcom_host {
/*
* Set this capability if host controller supports the QUniPro mode
@@ -220,6 +237,8 @@ struct ufs_qcom_host {
struct reset_controller_dev rcdev;
struct gpio_desc *device_reset;
+
+ struct ufs_qcom_perf_monitor monitor;
};
static inline u32
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux
Foundation Collaborative Project.
