Hello, all! I am having some problems with de delivery of the USB irq. Without the kernel-option "noapic", it seems, they just never make it to the kernel. I tried running with mps=1.1, mps=1.4, PNP OS=y/n, but that doesn't help... I am also running windoze 2000 on this machine, and that sets up the USB irq to 9... Can anyone shed some light on this problem? I'd be happy to try patches or give more info. The following are the startup log, and /proc/interrupts for both apic and noapic modes. The board is an Rioworks SDVIA (http://www.rioworks.com/product/VIA/sdvia.htm) with a VIA VT82C694X / VT82C596B chipset. Thanks in advance, Jeroen Hoogervorst ----------8<---------8<---------8<---------8<---------8<---------8<--------- 8<--------- Linux version 2.4.0.ac9.jwh1-PIII-SMP ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030 (prerelease)) #1 SMP Mon Jan 15 21:03:54 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f5c30 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bootup CPU Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 0, IRQ 1f, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 34, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 34, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 38, APIC ID 2, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 3c, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 40, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 44, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: mem=262080K root=/dev/sda5 apm=off Initializing CPU#0 Detected 736.016 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1468.00 BogoMIPS Memory: 254988k/262080k available (1244k kernel code, 6704k reserved, 481k data, 264k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 730.66 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 CPU#1 (phys ID: 1) waiting for CALLOUT Startup point 1. Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1471.28 BogoMIPS Stack at about c1449fbc CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 OK. CPU1: Intel Pentium III (Coppermine) stepping 03 CPU has booted. Before bogomips. Total of 2 processors activated (2939.28 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. testing NMI watchdog ... OK. number of MP IRQ sources: 23. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 .......: physical APIC id: 02 .... register #01: 00170011 .......: max redirection entries: 0017 .......: IO APIC version: 0011 .... register #02: 00000000 .......: arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 71 0f 003 03 0 0 0 0 0 1 1 79 10 003 03 1 1 0 1 0 1 1 81 11 003 03 1 1 0 1 0 1 1 89 12 003 03 1 1 0 1 0 1 1 91 13 003 03 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 735.9936 MHz. ..... host bus clock speed is 133.8169 MHz. cpu: 0, clocks: 1338169, slice: 446056 CPU0<T0:1338160,T1:892096,D:8,S:446056,C:1338169> cpu: 1, clocks: 1338169, slice: 446056 CPU1<T0:1338160,T1:446048,D:0,S:446056,C:1338169> checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: BIOS32 Service Directory structure at 0xc00fae30 PCI: BIOS32 Service Directory entry at 0xfb2a0 PCI: BIOS probe returned s=00 hw=11 ver=02.10 l=01 PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: IDE base address fixup for 00:07.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 Unknown bridge resource 0: assuming transparent PCI: IRQ init PCI: Interrupt Routing Table found at 0xc00fdba0 00:0d slot=01 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:0e slot=02 0:02/deb8 1:03/deb8 2:05/deb8 3:01/deb8 00:0f slot=03 0:03/deb8 1:05/deb8 2:01/deb8 3:02/deb8 00:11 slot=04 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:09 slot=05 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:08 slot=06 0:05/deb8 1:01/deb8 2:02/deb8 3:03/deb8 00:10 slot=07 0:05/deb8 1:01/deb8 2:02/deb8 3:03/deb8 00:0c slot=08 0:05/deb8 1:01/deb8 2:02/deb8 3:03/deb8 00:01 slot=00 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:07 slot=00 0:00/deb8 1:00/deb8 2:03/deb8 3:05/deb8 PCI: Using IRQ router VIA [1106/0596] at 00:07.0 PCI: IRQ fixup PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I9,P0) -> 16 PCI->APIC IRQ transform: (B0,I12,P0) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 16 PCI->APIC IRQ transform: (B0,I13,P0) -> 16 PCI->APIC IRQ transform: (B0,I14,P0) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 18 PCI->APIC IRQ transform: (B0,I16,P0) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Allocating resources PCI: Resource d0000000-d7ffffff (f=1208, d=0, p=0) PCI: Resource 0000c000-0000c00f (f=101, d=0, p=0) PCI: Resource 0000c400-0000c41f (f=101, d=0, p=0) PCI: Resource 0000c800-0000c807 (f=101, d=0, p=0) PCI: Resource 0000cc00-0000cc03 (f=101, d=0, p=0) PCI: Resource 0000d000-0000d007 (f=101, d=0, p=0) PCI: Resource 0000d400-0000d403 (f=101, d=0, p=0) PCI: Resource 0000d800-0000d80f (f=101, d=0, p=0) PCI: Resource 0000dc00-0000dcff (f=101, d=0, p=0) PCI: Resource e7203000-e72030ff (f=200, d=0, p=0) PCI: Resource e7205000-e7205fff (f=200, d=0, p=0) PCI: Resource 0000e000-0000e0ff (f=101, d=0, p=0) PCI: Resource e7200000-e72000ff (f=200, d=0, p=0) PCI: Resource e7201000-e7201fff (f=200, d=0, p=0) PCI: Resource e7202000-e7202fff (f=1208, d=0, p=0) PCI: Resource e7000000-e70fffff (f=200, d=0, p=0) PCI: Resource e7204000-e7204fff (f=200, d=0, p=0) PCI: Resource 0000e400-0000e43f (f=101, d=0, p=0) PCI: Resource e7100000-e71fffff (f=200, d=0, p=0) PCI: Resource 0000e800-0000e81f (f=101, d=0, p=0) PCI: Resource 0000ec00-0000ec07 (f=101, d=0, p=0) PCI: Resource e4000000-e4ffffff (f=200, d=0, p=0) PCI: Resource d8000000-dfffffff (f=1208, d=0, p=0) PCI: Resource e0000000-e3ffffff (f=200, d=1, p=1) PCI: Sorting device list... Activating ISA DMA hang workarounds. isapnp: Scanning for Pnp cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket DMI 2.3 present. 31 structures occupying 940 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Modular BIOS BIOS Version: 6.00 PG BIOS Release: 11/22/2000 System Vendor: Arima Computer Corp. Bios by Award Software, Inc. Product Name: SDVIA Series. Version . Serial Number . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) apm: disabled on user request. Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169341kB/38269kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c596b IDE UDMA66 controller on pci0:7.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio CMD649: IDE controller on PCI bus 00 dev 60 CMD649: chipset revision 1 CMD649: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Real Time Clock Driver v1.10d SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 13, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c876 detected with Symbios NVRAM sym53c8xx: at PCI bus 0, device 13, function 1 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c876 detected with Symbios NVRAM sym53c876-0: rev 0x14 on pci bus 0 device 13 function 1 irq 16 sym53c876-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking sym53c876-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/4e/80/01/00/24 sym53c876-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/00/08/24 sym53c876-0: on-chip RAM at 0xe7201000 sym53c876-0: resetting, command processing suspended for 2 seconds sym53c876-0: restart (scsi reset). sym53c876-0: enabling clock multiplier sym53c876-0: Downloading SCSI SCRIPTS. sym53c876-1: rev 0x14 on pci bus 0 device 13 function 0 irq 16 sym53c876-1: Symbios format NVRAM, ID 7, Fast-20, Parity Checking sym53c876-1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/4e/80/01/00/24 sym53c876-1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/00/08/24 sym53c876-1: on-chip RAM at 0xe7205000 sym53c876-1: resetting, command processing suspended for 2 seconds sym53c876-1: restart (scsi reset). sym53c876-1: enabling clock multiplier sym53c876-1: Downloading SCSI SCRIPTS. scsi0: sym53c8xx - version 1.6b scsi1: sym53c8xx - version 1.6b sym53c876-0: command processing resumed Vendor: IBM Model: DDYS-T18350N Rev: S93E Type: Direct-Access ANSI SCSI revision: 03 sym53c876-1: command processing resumed Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R08 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 04 sym53c876-0-<0,0>: tagged command queue depth set to 8 Vendor: IBM Model: DPES-31080 Rev: S31K Type: Direct-Access ANSI SCSI revision: 02 Vendor: TOSHIBA Model: MK537FB Rev: 6261 Type: Direct-Access ANSI SCSI revision: 02 Vendor: ARCHIVE Model: Python 04106-XXX Rev: 7230 Type: Sequential-Access ANSI SCSI revision: 02 Vendor: FUJITSU Model: M2513A Rev: 1700 Type: Optical Device ANSI SCSI revision: 02 Vendor: IOMEGA Model: ZIP 100 Rev: J.02 Type: Direct-Access ANSI SCSI revision: 02 sym53c876-1-<0,0>: tagged command queue depth set to 8 ncr53c8xx: at PCI bus 0, device 13, function 0 ncr53c8xx: IO region 0xdc00[0..127] is in use ncr53c8xx: at PCI bus 0, device 13, function 1 ncr53c8xx: IO region 0xe000[0..127] is in use DC395x (TRM-S1040) SCSI driver 1.32, 2000-12-02 DC395x (TRM-S1040): 0 adapters found Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi1, channel 0, id 0, lun 0 Detected scsi disk sdc at scsi1, channel 0, id 1, lun 0 Detected scsi removable disk sdd at scsi1, channel 0, id 3, lun 0 Detected scsi removable disk sde at scsi1, channel 0, id 5, lun 0 sym53c876-0-<0,0>: wide msgout: 1-2-3-1. sym53c876-0-<0,0>: wide msgin: 1-2-3-1. sym53c876-0-<0,0>: wide: wide=1 chg=0. sym53c876-0-<0,*>: WIDE SCSI (16 bit) enabled. sym53c876-0-<0,0>: wide msgout: 1-2-3-1. sym53c876-0-<0,0>: wide msgin: 1-2-3-1. sym53c876-0-<0,0>: wide: wide=1 chg=0. sym53c876-0-<0,0>: sync msgout: 1-3-1-c-10. sym53c876-0-<0,0>: sync msg in: 1-3-1-c-10. sym53c876-0-<0,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > sym53c876-1-<0,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<0,0>: sync msg in: 1-3-1-19-f. sym53c876-1-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c876-1-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) sym53c876-1-<0,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<0,0>: sync msg in: 1-3-1-19-f. sym53c876-1-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. SCSI device sdb: 2118144 512-byte hdwr sectors (1084 MB) /dev/scsi/host1/bus0/target0/lun0: p1 sym53c876-1-<1,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<1,0>: sync msg in: 1-3-1-19-10. sym53c876-1-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c876-1-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 16) sym53c876-1-<1,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<1,0>: sync msg in: 1-3-1-19-10. sym53c876-1-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=16 fak=0 chg=0. SCSI device sdc: 2076758 512-byte hdwr sectors (1063 MB) /dev/scsi/host1/bus0/target1/lun0: p1 sym53c876-1-<3,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<3,0>: sync msg in: 1-3-1-32-a. sym53c876-1-<3,0>: sync: per=50 scntl3=0x50 scntl4=0x0 ofs=10 fak=0 chg=0. sym53c876-1-<3,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 10) sym53c876-1-<3,0>: sync msgout: 1-3-1-c-10. sym53c876-1-<3,0>: sync msg in: 1-3-1-32-a. sym53c876-1-<3,0>: sync: per=50 scntl3=0x50 scntl4=0x0 ofs=10 fak=0 chg=0. SCSI device sdd: 310352 2048-byte hdwr sectors (636 MB) sdd: Write Protect is off /dev/scsi/host1/bus0/target3/lun0: unknown partition table sym53c876-1-<5,*>: target did not report SYNC. sym53c876-1-<5,*>: target did not report SYNC. SCSI device sde: 196608 512-byte hdwr sectors (101 MB) sde: Write Protect is off /dev/scsi/host1/bus0/target5/lun0: p4 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.251 $ time 21:05:56 Jan 15 2001 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x2 ACPI: System description tables found ACPI: System description tables loaded ACPI: Subsystem enabled ACPI: System firmware supports: S0 S1 S5 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 264k freed hub.c: USB new device connect on bus1/1, assigned device number 2 Adding Swap: 249832k swap-space (priority -1) usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=2 (error=-110) hub.c: USB new device connect on bus1/1, assigned device number 3 Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.50 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). bttv0: Bt848 (rev 18) at 00:0e.0, irq: 17, latency: 32, memory: 0xe7202000 bttv0: model: BT848A( *** UNKNOWN *** ) [autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3400C-C6 msp3400: daemon started bttv0: i2c attach [MSP3400C-C6] i2c-core.o: client [MSP3400C-C6] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [(unset)] i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 1). NTFS version 000607 Warning! NTFS volume version is Win2k+: Mounting read-only Detected scsi tape st0 at scsi1, channel 0, id 2, lun 0 st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=3 (error=-110) hub.c: USB new device connect on bus1/2, assigned device number 4 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=4 (error=-110) hub.c: USB new device connect on bus1/2, assigned device number 5 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=5 (error=-110) Creative EMU10K1 PCI Audio Driver, version 0.12, 21:09:57 Jan 15 2001 emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xe800-0xe81f, IRQ 16 ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708) Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). ----------8<---------8<---------8<---------8<---------8<---------8<--------- 8<--------- /proc/interrupts: CPU0 CPU1 0: 50518 48910 IO-APIC-edge timer 1: 184 233 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 8: 1 0 IO-APIC-edge rtc 9: 0 0 XT-PIC acpi 16: 1835 1870 IO-APIC-level sym53c8xx, sym53c8xx, EMU10K1 17: 0 0 IO-APIC-level bttv 19: 3341 3323 IO-APIC-level usb-uhci, eth0 NMI: 99336 99361 LOC: 99317 99342 ERR: 0 ----------8<---------8<---------8<---------8<---------8<---------8<--------- 8<--------- /proc/interrupts (in noapic mode): CPU0 0: 28729 XT-PIC timer 1: 7 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 0 XT-PIC bttv 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10: 971 XT-PIC usb-uhci, eth0 11: 3490 XT-PIC sym53c8xx, sym53c8xx, EMU10K1 NMI: 0 ERR: 0 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
