On Mon, Dec 28, 2020 at 4:03 AM Jernej Škrabec <jernej.skra...@siol.net> wrote: > > Hi! > > Dne nedelja, 27. december 2020 ob 21:00:00 CET je Corentin Labbe napisal(a): > > Lot of sunxi boards have BRCM wireless device, so let's enable necessary > > options for it in our defconfig. > > Idea is good but modules (=m) instead of build in (=y) would be better. As you > said, not all boards have such wifi and there is no need to make kernel binary > bigger.
It's probably not very useful on its own if built in, since it also needs firmware blobs, and when built in it doesn't wait for the rootfs to be available. ChenYu > Best regards, > Jernej > > > > > Signed-off-by: Corentin Labbe <cla...@baylibre.com> > > --- > > arch/arm/configs/sunxi_defconfig | 23 ++++++++++++++++++++++- > > 1 file changed, 22 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/configs/sunxi_defconfig > > b/arch/arm/configs/sunxi_defconfig index a60c134c5e04..4891aefdef7d 100644 > > --- a/arch/arm/configs/sunxi_defconfig > > +++ b/arch/arm/configs/sunxi_defconfig > > @@ -52,7 +52,28 @@ CONFIG_STMMAC_ETH=y > > # CONFIG_NET_VENDOR_WIZNET is not set > > CONFIG_MICREL_PHY=y > > CONFIG_REALTEK_PHY=y > > -# CONFIG_WLAN is not set > > +CONFIG_WLAN=y > > +# CONFIG_WLAN_VENDOR_ADMTEK is not set > > +# CONFIG_WLAN_VENDOR_ATH is not set > > +# CONFIG_WLAN_VENDOR_ATMEL is not set > > +CONFIG_WLAN_VENDOR_BROADCOM=y > > +# CONFIG_WLAN_VENDOR_CISCO is not set > > +# CONFIG_WLAN_VENDOR_INTEL is not set > > +# CONFIG_WLAN_VENDOR_INTERSIL is not set > > +# CONFIG_WLAN_VENDOR_MARVELL is not set > > +# CONFIG_WLAN_VENDOR_MEDIATEK is not set > > +# CONFIG_WLAN_VENDOR_MICROCHIP is not set > > +# CONFIG_WLAN_VENDOR_RALINK is not set > > +# CONFIG_WLAN_VENDOR_REALTEK is not set > > +# CONFIG_WLAN_VENDOR_RSI is not set > > +# CONFIG_WLAN_VENDOR_ST is not set > > +# CONFIG_WLAN_VENDOR_TI is not set > > +# CONFIG_WLAN_VENDOR_ZYDAS is not set > > +# CONFIG_WLAN_VENDOR_QUANTENNA is not set > > +CONFIG_CFG80211=y > > +CONFIG_CFG80211_WEXT=y > > +CONFIG_MAC80211=y > > +CONFIG_BRCMFMAC=y > > CONFIG_INPUT_EVDEV=y > > CONFIG_KEYBOARD_SUN4I_LRADC=y > > # CONFIG_INPUT_MOUSE is not set > > > > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/linux-sunxi/25142918.GuFC1uy7vR%40jernej-laptop.
