Hi Tomasz,
Thank you for your comments,
On 12/14/20 5:52 AM, Tomasz Figa wrote:
> Hi Helen,
>
> On Tue, Aug 04, 2020 at 04:29:35PM -0300, Helen Koike wrote:
>> The VB2 layer is used by a lot of drivers. Patch it to support the
>> _EXT_PIX_FMT and _EXT_BUF ioctls in order to ease conversion of existing
>> drivers to these new APIs.
>>
>> Note that internally, the VB2 core is now only using ext structs and old
>> APIs are supported through conversion wrappers.
>
> We decided to only support V4L2_BUF_TYPE_VIDEO* for the ext structs. Still,
> existing drivers may use vb2 with the other, legacy, buf types. How would
> they be handled with this change?
I completly refactored this patch in my wip branch, I'll submit for comments
soon after finishing addressing the other comments.
The way I'm approaching this is to support both structures v4l2_buffer and
v4l2_ext_buffer, but only in the vb2 entry points, since all the
information we need is in vb2_buffer struct.
To implement this I had to use new hooks in the framework. I think it is easier
if you take a look in next version when I submited it.
>
>>
>> Signed-off-by: Boris Brezillon <boris.brezil...@collabora.com>
>> Signed-off-by: Helen Koike <helen.ko...@collabora.com>
>> ---
>> Changes in v5:
>> - Update with new format and buffer structs
>> - Updated commit message with the uAPI prefix
>>
>> Changes in v4:
>> - Update with new format and buffer structs
>> - Fix some bugs caught by v4l2-compliance
>> - Rebased on top of media/master (post 5.8-rc1)
>>
>> Changes in v3:
>> - Rebased on top of media/master (post 5.4-rc1)
>>
>> Changes in v2:
>> - New patch
>> ---
>> .../media/common/videobuf2/videobuf2-core.c | 2 +
>> .../media/common/videobuf2/videobuf2-v4l2.c | 560 ++++++++++--------
>> include/media/videobuf2-core.h | 6 +-
>> include/media/videobuf2-v4l2.h | 21 +-
>> 4 files changed, 345 insertions(+), 244 deletions(-)
>>
>> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c
>> b/drivers/media/common/videobuf2/videobuf2-core.c
>> index f544d3393e9d6..d719b1e9c148b 100644
>> --- a/drivers/media/common/videobuf2/videobuf2-core.c
>> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
>> @@ -1270,6 +1270,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb)
>> vb->planes[plane].length = 0;
>> vb->planes[plane].m.fd = 0;
>> vb->planes[plane].data_offset = 0;
>> + vb->planes[plane].dbuf_offset = 0;
>>
>> /* Acquire each plane's memory */
>> mem_priv = call_ptr_memop(vb, attach_dmabuf,
>> @@ -1313,6 +1314,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb)
>> vb->planes[plane].length = planes[plane].length;
>> vb->planes[plane].m.fd = planes[plane].m.fd;
>> vb->planes[plane].data_offset = planes[plane].data_offset;
>> + vb->planes[plane].dbuf_offset = planes[plane].dbuf_offset;
>> }
>>
>> if (reacquired) {
>> diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c
>> b/drivers/media/common/videobuf2/videobuf2-v4l2.c
>> index 30caad27281e1..911681d24b3ae 100644
>> --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
>> +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
>> @@ -29,6 +29,7 @@
>> #include <media/v4l2-fh.h>
>> #include <media/v4l2-event.h>
>> #include <media/v4l2-common.h>
>> +#include <media/v4l2-ioctl.h>
>>
>> #include <media/videobuf2-v4l2.h>
>>
>> @@ -56,72 +57,39 @@ module_param(debug, int, 0644);
>> V4L2_BUF_FLAG_TIMECODE | \
>> V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF)
>>
>> -/*
>> - * __verify_planes_array() - verify that the planes array passed in struct
>> - * v4l2_buffer from userspace can be safely used
>> - */
>> -static int __verify_planes_array(struct vb2_buffer *vb, const struct
>> v4l2_buffer *b)
>> -{
>> - if (!V4L2_TYPE_IS_MULTIPLANAR(b->type))
>> - return 0;
>> -
>> - /* Is memory for copying plane information present? */
>> - if (b->m.planes == NULL) {
>> - dprintk(vb->vb2_queue, 1,
>> - "multi-planar buffer passed but planes array not
>> provided\n");
>> - return -EINVAL;
>> - }
>> -
>> - if (b->length < vb->num_planes || b->length > VB2_MAX_PLANES) {
>> - dprintk(vb->vb2_queue, 1,
>> - "incorrect planes array length, expected %d, got %d\n",
>> - vb->num_planes, b->length);
>> - return -EINVAL;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> static int __verify_planes_array_core(struct vb2_buffer *vb, const void *pb)
>> {
>> - return __verify_planes_array(vb, pb);
>> + return 0;
>> }
>>
>> /*
>> * __verify_length() - Verify that the bytesused value for each plane fits
>> in
>> * the plane length and that the data offset doesn't exceed the bytesused
>> value.
>> */
>> -static int __verify_length(struct vb2_buffer *vb, const struct v4l2_buffer
>> *b)
>> +static int __verify_length(struct vb2_buffer *vb,
>> + const struct v4l2_ext_buffer *b)
>> {
>> unsigned int length;
>> unsigned int bytesused;
>> - unsigned int plane;
>> + unsigned int i;
>>
>> if (V4L2_TYPE_IS_CAPTURE(b->type))
>> return 0;
>>
>> - if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - length = (b->memory == VB2_MEMORY_USERPTR ||
>> - b->memory == VB2_MEMORY_DMABUF)
>> - ? b->m.planes[plane].length
>> - : vb->planes[plane].length;
>> - bytesused = b->m.planes[plane].bytesused
>> - ? b->m.planes[plane].bytesused : length;
>> -
>> - if (b->m.planes[plane].bytesused > length)
>> - return -EINVAL;
>> -
>> - if (b->m.planes[plane].data_offset > 0 &&
>> - b->m.planes[plane].data_offset >= bytesused)
>> - return -EINVAL;
>> - }
>> - } else {
>> - length = (b->memory == VB2_MEMORY_USERPTR ||
>> - b->memory == VB2_MEMORY_DMABUF)
>> - ? b->length : vb->planes[0].length;
>> + for (i = 0; i < vb->num_planes; ++i) {
>> + const struct v4l2_ext_plane *plane = &b->planes[i];
>>
>> - if (b->bytesused > length)
>> + length = (plane->memory == VB2_MEMORY_USERPTR ||
>> + plane->memory == VB2_MEMORY_DMABUF) ?
>> + plane->buffer_length :
>> + vb->planes[i].length;
>> + bytesused = plane->plane_length ?
>> + plane->plane_length : length;
>> +
>> + if (bytesused > length)
>> + return -EINVAL;
>> +
>> + if (plane->offset + bytesused > length)
>> return -EINVAL;
>> }
>>
>> @@ -140,21 +108,12 @@ static void __init_vb2_v4l2_buffer(struct vb2_buffer
>> *vb)
>>
>> static void __copy_timestamp(struct vb2_buffer *vb, const void *pb)
>> {
>> - const struct v4l2_buffer *b = pb;
>> - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + const struct v4l2_ext_buffer *b = pb;
>> struct vb2_queue *q = vb->vb2_queue;
>>
>> - if (q->is_output) {
>> - /*
>> - * For output buffers copy the timestamp if needed,
>> - * and the timecode field and flag if needed.
>> - */
>> - if (q->copy_timestamp)
>> - vb->timestamp = v4l2_buffer_get_timestamp(b);
>> - vbuf->flags |= b->flags & V4L2_BUF_FLAG_TIMECODE;
>> - if (b->flags & V4L2_BUF_FLAG_TIMECODE)
>> - vbuf->timecode = b->timecode;
>
> Is it okay to remove the timecode copying functionality?
>
>> - }
>> + /* For output buffers copy the timestamp if needed. */
>> + if (q->is_output && q->copy_timestamp)
>> + vb->timestamp = b->timestamp;
>> };
>>
>> static void vb2_warn_zero_bytesused(struct vb2_buffer *vb)
>> @@ -173,7 +132,8 @@ static void vb2_warn_zero_bytesused(struct vb2_buffer
>> *vb)
>> pr_warn("use the actual size instead.\n");
>> }
>>
>> -static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct
>> v4l2_buffer *b)
>> +static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb,
>> + struct v4l2_ext_buffer *b)
>> {
>> struct vb2_queue *q = vb->vb2_queue;
>> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> @@ -203,110 +163,67 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer
>> *vb, struct v4l2_buffer *b
>> vbuf->request_fd = -1;
>> vbuf->is_held = false;
>>
>> - if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
>> - switch (b->memory) {
>> - case VB2_MEMORY_USERPTR:
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - planes[plane].m.userptr =
>> - b->m.planes[plane].m.userptr;
>> - planes[plane].length =
>> - b->m.planes[plane].length;
>> - }
>> - break;
>> - case VB2_MEMORY_DMABUF:
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - planes[plane].m.fd =
>> - b->m.planes[plane].m.fd;
>> - planes[plane].length =
>> - b->m.planes[plane].length;
>> - }
>> - break;
>> - default:
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - planes[plane].m.offset =
>> - vb->planes[plane].m.offset;
>> - planes[plane].length =
>> - vb->planes[plane].length;
>> - }
>> - break;
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + if (b->planes[0].memory != b->planes[plane].memory) {
>> + dprintk(q, 1, "planes should have the same memory
>> type\n");
>> + return -EINVAL;
>> }
>> + }
>>
>> - /* Fill in driver-provided information for OUTPUT types */
>> - if (V4L2_TYPE_IS_OUTPUT(b->type)) {
>> - /*
>> - * Will have to go up to b->length when API starts
>> - * accepting variable number of planes.
>> - *
>> - * If bytesused == 0 for the output buffer, then fall
>> - * back to the full buffer size. In that case
>> - * userspace clearly never bothered to set it and
>> - * it's a safe assumption that they really meant to
>> - * use the full plane sizes.
>> - *
>> - * Some drivers, e.g. old codec drivers, use bytesused
>> == 0
>> - * as a way to indicate that streaming is finished.
>> - * In that case, the driver should use the
>> - * allow_zero_bytesused flag to keep old userspace
>> - * applications working.
>> - */
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - struct vb2_plane *pdst = &planes[plane];
>> - struct v4l2_plane *psrc = &b->m.planes[plane];
>> -
>> - if (psrc->bytesused == 0)
>> - vb2_warn_zero_bytesused(vb);
>> -
>> - if (vb->vb2_queue->allow_zero_bytesused)
>> - pdst->bytesused = psrc->bytesused;
>> - else
>> - pdst->bytesused = psrc->bytesused ?
>> - psrc->bytesused : pdst->length;
>> - pdst->data_offset = psrc->data_offset;
>> - }
>> + switch (b->planes[0].memory) {
>> + case VB2_MEMORY_USERPTR:
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + planes[plane].m.userptr = b->planes[plane].m.userptr;
>> + planes[plane].length = b->planes[plane].buffer_length;
>> }
>> - } else {
>> + break;
>> + case VB2_MEMORY_DMABUF:
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + planes[plane].m.fd = b->planes[plane].m.dmabuf_fd;
>> + planes[plane].dbuf_offset = b->planes[plane].offset;
>> + planes[plane].length = b->planes[plane].buffer_length;
>> + }
>> + break;
>> + default:
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + planes[plane].m.offset = vb->planes[plane].m.offset;
>> + planes[plane].length = vb->planes[plane].length;
>> + }
>> + break;
>> + }
>> +
>> + /* Fill in driver-provided information for OUTPUT types */
>> + if (V4L2_TYPE_IS_OUTPUT(b->type)) {
>> /*
>> - * Single-planar buffers do not use planes array,
>> - * so fill in relevant v4l2_buffer struct fields instead.
>> - * In videobuf we use our internal V4l2_planes struct for
>> - * single-planar buffers as well, for simplicity.
>> + * Will have to go up to b->length when API starts
>> + * accepting variable number of planes.
>> *
>> - * If bytesused == 0 for the output buffer, then fall back
>> - * to the full buffer size as that's a sensible default.
>> + * If bytesused == 0 for the output buffer, then fall
>
> Should this be updated with the new field name?
For next version I implemented a vb2_fill_vb2_v4l2_buffer_ext() and I didn't
touch this code.
>
>> + * back to the full buffer size. In that case
>> + * userspace clearly never bothered to set it and
>> + * it's a safe assumption that they really meant to
>> + * use the full plane sizes.
>> *
>> - * Some drivers, e.g. old codec drivers, use bytesused == 0 as
>> - * a way to indicate that streaming is finished. In that case,
>> - * the driver should use the allow_zero_bytesused flag to keep
>> - * old userspace applications working.
>> + * Some drivers, e.g. old codec drivers, use bytesused == 0
>> + * as a way to indicate that streaming is finished.
>> + * In that case, the driver should use the
>> + * allow_zero_bytesused flag to keep old userspace
>> + * applications working.
>
> Do we retain this behavior in the new API? If no, I guess we need to check
> if this was old or new API and react appropriately.
For next version I implemented a vb2_fill_vb2_v4l2_buffer_ext() and I didn't
touch this code.
>
>> */
>> - switch (b->memory) {
>> - case VB2_MEMORY_USERPTR:
>> - planes[0].m.userptr = b->m.userptr;
>> - planes[0].length = b->length;
>> - break;
>> - case VB2_MEMORY_DMABUF:
>> - planes[0].m.fd = b->m.fd;
>> - planes[0].length = b->length;
>> - break;
>> - default:
>> - planes[0].m.offset = vb->planes[0].m.offset;
>> - planes[0].length = vb->planes[0].length;
>> - break;
>> - }
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + struct vb2_plane *pdst = &planes[plane];
>> + struct v4l2_ext_plane *psrc = &b->planes[plane];
>>
>> - planes[0].data_offset = 0;
>> - if (V4L2_TYPE_IS_OUTPUT(b->type)) {
>> - if (b->bytesused == 0)
>> + if (psrc->plane_length == 0)
>> vb2_warn_zero_bytesused(vb);
>>
>> if (vb->vb2_queue->allow_zero_bytesused)
>> - planes[0].bytesused = b->bytesused;
>> + pdst->bytesused = psrc->plane_length;
>> else
>> - planes[0].bytesused = b->bytesused ?
>> - b->bytesused : planes[0].length;
>> - } else
>> - planes[0].bytesused = 0;
>> -
>> + pdst->bytesused = psrc->plane_length ?
>> + psrc->plane_length :
>> + pdst->length;
>> + }
>> }
>>
>> /* Zero flags that we handle */
>> @@ -343,7 +260,7 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer
>> *vb, struct v4l2_buffer *b
>>
>> static void set_buffer_cache_hints(struct vb2_queue *q,
>> struct vb2_buffer *vb,
>> - struct v4l2_buffer *b)
>> + struct v4l2_ext_buffer *b)
>> {
>> /*
>> * DMA exporter should take care of cache syncs, so we can avoid
>> @@ -388,17 +305,44 @@ static void set_buffer_cache_hints(struct vb2_queue *q,
>> vb->need_cache_sync_on_prepare = 0;
>> }
>>
>> +static enum v4l2_buf_type vb2_ext_qtype(struct vb2_queue *q)
>> +{
>> + if (!q->is_multiplanar)
>> + return q->type;
>
> Do we need this explicit check? Wouldn't the code below would return
> the right thing anyway?
Ack, I had already updated this in my wip branch.
>
>> +
>> + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
>> + return V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + else if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> + return V4L2_BUF_TYPE_VIDEO_OUTPUT;
>> +
>> + return q->type;
>> +}
>> +
>> +static enum v4l2_buf_type vb2_ext_type(unsigned int type, bool
>> is_multiplanar)
>> +{
>> + if (!is_multiplanar)
>> + return type;
>
> Ditto.
Not here, since ext type always use non MPLANE regardless if the driver
supports multiplanar or not, so we need to know to which type to
convert back.
>
>> +
>> + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
>> + else if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> + return V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
>> +
>> + return type;
>> +}
>> +
>> static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct
>> media_device *mdev,
>> - struct v4l2_buffer *b, bool is_prepare,
>> + struct v4l2_ext_buffer *b, bool is_prepare,
>> struct media_request **p_req)
>> {
>> const char *opname = is_prepare ? "prepare_buf" : "qbuf";
>> struct media_request *req;
>> struct vb2_v4l2_buffer *vbuf;
>> struct vb2_buffer *vb;
>> + unsigned int i;
>> int ret;
>>
>> - if (b->type != q->type) {
>> + if (b->type != vb2_ext_qtype(q)) {
>> dprintk(q, 1, "%s: invalid buffer type\n", opname);
>> return -EINVAL;
>> }
>> @@ -414,16 +358,14 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue
>> *q, struct media_device *md
>> return -EINVAL;
>> }
>>
>> - if (b->memory != q->memory) {
>> + for (i = 0; i < VIDEO_MAX_PLANES && b->planes[i].buffer_length; i++)
>> + if (b->planes[i].memory != q->memory) {
>> dprintk(q, 1, "%s: invalid memory type\n", opname);
>> return -EINVAL;
>> }
>>
>> vb = q->bufs[b->index];
>> vbuf = to_vb2_v4l2_buffer(vb);
>> - ret = __verify_planes_array(vb, b);
>> - if (ret)
>> - return ret;
>>
>> if (!is_prepare && (b->flags & V4L2_BUF_FLAG_REQUEST_FD) &&
>> vb->state != VB2_BUF_STATE_DEQUEUED) {
>> @@ -487,11 +429,6 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue
>> *q, struct media_device *md
>> !q->ops->buf_out_validate))
>> return -EINVAL;
>>
>> - if (b->request_fd < 0) {
>> - dprintk(q, 1, "%s: request_fd < 0\n", opname);
>> - return -EINVAL;
>> - }
>> -
>
> I guess this code was useless already, because the call below would
> validate the FD, but should it be perhaps removed in a separate patch?
Ack, I'll submit a separate patch.
>
>> req = media_request_get_by_fd(mdev, b->request_fd);
>> if (IS_ERR(req)) {
>> dprintk(q, 1, "%s: invalid request_fd\n", opname);
>> @@ -516,64 +453,46 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue
>> *q, struct media_device *md
>> }
>>
>> /*
>> - * __fill_v4l2_buffer() - fill in a struct v4l2_buffer with information to
>> be
>> - * returned to userspace
>> + * __fill_v4l2_buffer() - fill in a struct v4l2_ext_buffer with information
>> to
>> + * be returned to userspace
>> */
>> static void __fill_v4l2_buffer(struct vb2_buffer *vb, void *pb)
>> {
>> - struct v4l2_buffer *b = pb;
>> + struct v4l2_ext_buffer *b = pb;
>> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> struct vb2_queue *q = vb->vb2_queue;
>> unsigned int plane;
>>
>> /* Copy back data such as timestamp, flags, etc. */
>> b->index = vb->index;
>> - b->type = vb->type;
>> - b->memory = vb->memory;
>> - b->bytesused = 0;
>> + b->type = vb2_ext_qtype(q);
>>
>> b->flags = vbuf->flags;
>> b->field = vbuf->field;
>> - v4l2_buffer_set_timestamp(b, vb->timestamp);
>> - b->timecode = vbuf->timecode;
>> + b->timestamp = vb->timestamp;
>> b->sequence = vbuf->sequence;
>> - b->reserved2 = 0;
>> b->request_fd = 0;
>> + memset(b->reserved, 0, sizeof(b->reserved));
>>
>> - if (q->is_multiplanar) {
>> - /*
>> - * Fill in plane-related data if userspace provided an array
>> - * for it. The caller has already verified memory and size.
>> - */
>> - b->length = vb->num_planes;
>> - for (plane = 0; plane < vb->num_planes; ++plane) {
>> - struct v4l2_plane *pdst = &b->m.planes[plane];
>> - struct vb2_plane *psrc = &vb->planes[plane];
>> -
>> - pdst->bytesused = psrc->bytesused;
>> - pdst->length = psrc->length;
>> - if (q->memory == VB2_MEMORY_MMAP)
>> - pdst->m.mem_offset = psrc->m.offset;
>> - else if (q->memory == VB2_MEMORY_USERPTR)
>> - pdst->m.userptr = psrc->m.userptr;
>> - else if (q->memory == VB2_MEMORY_DMABUF)
>> - pdst->m.fd = psrc->m.fd;
>> - pdst->data_offset = psrc->data_offset;
>> - memset(pdst->reserved, 0, sizeof(pdst->reserved));
>> - }
>> - } else {
>> - /*
>> - * We use length and offset in v4l2_planes array even for
>> - * single-planar buffers, but userspace does not.
>> - */
>> - b->length = vb->planes[0].length;
>> - b->bytesused = vb->planes[0].bytesused;
>> + /*
>> + * Fill in plane-related data if userspace provided an array
>> + * for it. The caller has already verified memory and size.
>> + */
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + struct v4l2_ext_plane *pdst = &b->planes[plane];
>> + struct vb2_plane *psrc = &vb->planes[plane];
>> +
>> + pdst->memory = vb->memory;
>> + pdst->plane_length = psrc->bytesused;
>> + pdst->buffer_length = psrc->length;
>> + pdst->offset = psrc->dbuf_offset;
>> if (q->memory == VB2_MEMORY_MMAP)
>> - b->m.offset = vb->planes[0].m.offset;
>> + pdst->m.mem_offset = psrc->m.offset;
>> else if (q->memory == VB2_MEMORY_USERPTR)
>> - b->m.userptr = vb->planes[0].m.userptr;
>> + pdst->m.userptr = psrc->m.userptr;
>> else if (q->memory == VB2_MEMORY_DMABUF)
>> - b->m.fd = vb->planes[0].m.fd;
>> + pdst->m.dmabuf_fd = psrc->m.fd;
>> + memset(pdst->reserved, 0, sizeof(pdst->reserved));
>> }
>>
>> /*
>> @@ -668,6 +587,35 @@ int vb2_find_timestamp(const struct vb2_queue *q, u64
>> timestamp,
>> }
>> EXPORT_SYMBOL_GPL(vb2_find_timestamp);
>>
>> +#define vb2_buf_to_ext_buf_op(_name, ...) \
>> +({ \
>> + int ret; \
>> + \
>> + ret = v4l2_buffer_to_ext_buffer(b, &eb); \
>> + if (!ret) \
>> + ret = _name(__VA_ARGS__); \
>> + if (!ret) \
>> + ret = v4l2_ext_buffer_to_buffer(&eb, b, \
>> + q->is_multiplanar); \
>
> I'm not very happy with this macro implicitly relying on existence of some
> specific variables with predefined names in the scope of the caller.
>
> That said, I don't have a good idea on how this could be fixed, other than
> just repeating this code manually in each function.
>
> If we don't find anything better, I think at least a comment here
> explaining the assumptions would make it a bit better.
I completly removed this macro for the newer version.
>
>> + ret; \
>> +})
>> +
>> +int vb2_ext_querybuf(struct vb2_queue *q, struct v4l2_ext_buffer *b)
>> +{
>> + if (b->type != vb2_ext_qtype(q)) {
>> + dprintk(q, 1, "wrong buffer type\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (b->index >= q->num_buffers) {
>> + dprintk(q, 1, "buffer index out of range\n");
>> + return -EINVAL;
>> + }
>> + vb2_core_querybuf(q, b->index, b);
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(vb2_ext_querybuf);
>> +
>> /*
>> * vb2_querybuf() - query video buffer information
>> * @q: videobuf queue
>> @@ -683,23 +631,9 @@ EXPORT_SYMBOL_GPL(vb2_find_timestamp);
>> */
>> int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b)
>> {
>> - struct vb2_buffer *vb;
>> - int ret;
>> -
>> - if (b->type != q->type) {
>> - dprintk(q, 1, "wrong buffer type\n");
>> - return -EINVAL;
>> - }
>> + struct v4l2_ext_buffer eb;
>>
>> - if (b->index >= q->num_buffers) {
>> - dprintk(q, 1, "buffer index out of range\n");
>> - return -EINVAL;
>> - }
>> - vb = q->bufs[b->index];
>> - ret = __verify_planes_array(vb, b);
>> - if (!ret)
>> - vb2_core_querybuf(q, b->index, b);
>> - return ret;
>> + return vb2_buf_to_ext_buf_op(vb2_ext_querybuf, q, &eb);
>> }
>> EXPORT_SYMBOL(vb2_querybuf);
>>
>> @@ -741,8 +675,8 @@ int vb2_reqbufs(struct vb2_queue *q, struct
>> v4l2_requestbuffers *req)
>> }
>> EXPORT_SYMBOL_GPL(vb2_reqbufs);
>>
>> -int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev,
>> - struct v4l2_buffer *b)
>> +int vb2_ext_prepare_buf(struct vb2_queue *q, struct media_device *mdev,
>> + struct v4l2_ext_buffer *b)
>> {
>> int ret;
>>
>> @@ -758,16 +692,59 @@ int vb2_prepare_buf(struct vb2_queue *q, struct
>> media_device *mdev,
>>
>> return ret ? ret : vb2_core_prepare_buf(q, b->index, b);
>> }
>> +EXPORT_SYMBOL_GPL(vb2_ext_prepare_buf);
>> +
>> +int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev,
>> + struct v4l2_buffer *b)
>> +{
>> + struct v4l2_ext_buffer eb;
>> +
>> + return vb2_buf_to_ext_buf_op(vb2_ext_prepare_buf, q, mdev, &eb);
>> +}
>> EXPORT_SYMBOL_GPL(vb2_prepare_buf);
>>
>> +int vb2_ext_create_bufs(struct vb2_queue *q,
>> + struct v4l2_ext_create_buffers *create)
>> +{
>> + unsigned int requested_sizes[VIDEO_MAX_PLANES];
>> + struct v4l2_ext_pix_format *f = &create->format;
>> + int ret = vb2_verify_memory_type(q, create->memory,
>> + vb2_ext_type(f->type, q->is_multiplanar));
>> + unsigned i;
>> +
>> + if (create->format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
>> + create->format.type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> + return -EINVAL;
>> +
>> + fill_buf_caps(q, &create->capabilities);
>> + clear_consistency_attr(q, create->memory, &create->flags);
>> + create->index = q->num_buffers;
>> + if (create->count == 0)
>> + return ret != -EBUSY ? ret : 0;
>> +
>> + if (!f->plane_fmt[0].sizeimage)
>> + return -EINVAL;
>> + for (i = 0; i < VIDEO_MAX_PLANES &&
>> + f->plane_fmt[i].sizeimage; i++)
>> + requested_sizes[i] = f->plane_fmt[i].sizeimage;
>> +
>> + return ret ? ret : vb2_core_create_bufs(q, create->memory,
>> + create->flags,
>> + &create->count,
>> + i,
>> + requested_sizes);
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ext_create_bufs);
>> +
>> int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
>> {
>> + struct v4l2_format *f = &create->format;
>> unsigned requested_planes = 1;
>> unsigned requested_sizes[VIDEO_MAX_PLANES];
>> - struct v4l2_format *f = &create->format;
>> int ret = vb2_verify_memory_type(q, create->memory, f->type);
>> unsigned i;
>>
>> +
>> fill_buf_caps(q, &create->capabilities);
>> clear_consistency_attr(q, create->memory, &create->flags);
>> create->index = q->num_buffers;
>> @@ -777,18 +754,29 @@ int vb2_create_bufs(struct vb2_queue *q, struct
>> v4l2_create_buffers *create)
>> switch (f->type) {
>> case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
>> case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
>> - requested_planes = f->fmt.pix_mp.num_planes;
>> - if (requested_planes == 0 ||
>> - requested_planes > VIDEO_MAX_PLANES)
>> - return -EINVAL;
>> - for (i = 0; i < requested_planes; i++)
>> - requested_sizes[i] =
>> - f->fmt.pix_mp.plane_fmt[i].sizeimage;
>> - break;
>> case V4L2_BUF_TYPE_VIDEO_CAPTURE:
>> - case V4L2_BUF_TYPE_VIDEO_OUTPUT:
>> - requested_sizes[0] = f->fmt.pix.sizeimage;
>> - break;
>> + case V4L2_BUF_TYPE_VIDEO_OUTPUT: {
>> + struct v4l2_ext_create_buffers ecreate = {
>> + .count = create->count,
>> + .memory = create->memory,
>> + .flags = create->flags,
>> + };
>> +
>> + ret = v4l2_format_to_ext_pix_format(&create->format,
>> + &ecreate.format, true);
>> + if (ret)
>> + return ret;
>> +
>> + ret = vb2_ext_create_bufs(q, &ecreate);
>> + if (ret)
>> + return ret;
>> +
>> + create->index = ecreate.index;
>> + create->count = ecreate.count;
>> + create->flags = ecreate.flags;
>> + create->capabilities = ecreate.capabilities;
>> + return 0;
>> + }
>> case V4L2_BUF_TYPE_VBI_CAPTURE:
>> case V4L2_BUF_TYPE_VBI_OUTPUT:
>> requested_sizes[0] = f->fmt.vbi.samples_per_line *
>> @@ -820,8 +808,8 @@ int vb2_create_bufs(struct vb2_queue *q, struct
>> v4l2_create_buffers *create)
>> }
>> EXPORT_SYMBOL_GPL(vb2_create_bufs);
>>
>> -int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev,
>> - struct v4l2_buffer *b)
>> +int vb2_ext_qbuf(struct vb2_queue *q, struct media_device *mdev,
>> + struct v4l2_ext_buffer *b)
>> {
>> struct media_request *req = NULL;
>> int ret;
>> @@ -839,9 +827,19 @@ int vb2_qbuf(struct vb2_queue *q, struct media_device
>> *mdev,
>> media_request_put(req);
>> return ret;
>> }
>> +EXPORT_SYMBOL_GPL(vb2_ext_qbuf);
>> +
>> +int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev,
>> + struct v4l2_buffer *b)
>> +{
>> + struct v4l2_ext_buffer eb;
>> +
>> + return vb2_buf_to_ext_buf_op(vb2_ext_qbuf, q, mdev, &eb);
>> +}
>> EXPORT_SYMBOL_GPL(vb2_qbuf);
>>
>> -int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking)
>> +int vb2_ext_dqbuf(struct vb2_queue *q, struct v4l2_ext_buffer *b,
>> + bool nonblocking)
>> {
>> int ret;
>>
>> @@ -850,7 +848,7 @@ int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer
>> *b, bool nonblocking)
>> return -EBUSY;
>> }
>>
>> - if (b->type != q->type) {
>> + if (b->type != vb2_ext_qtype(q)) {
>> dprintk(q, 1, "invalid buffer type\n");
>> return -EINVAL;
>> }
>> @@ -870,6 +868,14 @@ int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer
>> *b, bool nonblocking)
>>
>> return ret;
>> }
>> +EXPORT_SYMBOL_GPL(vb2_ext_dqbuf);
>> +
>> +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking)
>> +{
>> + struct v4l2_ext_buffer eb;
>> +
>> + return vb2_buf_to_ext_buf_op(vb2_ext_dqbuf, q, &eb, nonblocking);
>> +}
>> EXPORT_SYMBOL_GPL(vb2_dqbuf);
>>
>> int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type)
>> @@ -1040,6 +1046,33 @@ int vb2_ioctl_create_bufs(struct file *file, void
>> *priv,
>> }
>> EXPORT_SYMBOL_GPL(vb2_ioctl_create_bufs);
>>
>> +int vb2_ioctl_ext_create_bufs(struct file *file, void *priv,
>> + struct v4l2_ext_create_buffers *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> + int res = vb2_verify_memory_type(vdev->queue, p->memory,
>> + vb2_ext_type(p->format.type, vdev->queue->is_multiplanar));
>> +
>> + p->index = vdev->queue->num_buffers;
>> + fill_buf_caps(vdev->queue, &p->capabilities);
>> + /*
>> + * If count == 0, then just check if memory and type are valid.
>> + * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0.
>> + */
>> + if (p->count == 0)
>> + return res != -EBUSY ? res : 0;
>> + if (res)
>> + return res;
>> + if (vb2_queue_is_busy(vdev, file))
>> + return -EBUSY;
>> +
>> + res = vb2_ext_create_bufs(vdev->queue, p);
>> + if (res == 0)
>> + vdev->queue->owner = file->private_data;
>> + return res;
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_create_bufs);
>> +
>> int vb2_ioctl_prepare_buf(struct file *file, void *priv,
>> struct v4l2_buffer *p)
>> {
>> @@ -1051,6 +1084,17 @@ int vb2_ioctl_prepare_buf(struct file *file, void
>> *priv,
>> }
>> EXPORT_SYMBOL_GPL(vb2_ioctl_prepare_buf);
>>
>> +int vb2_ioctl_ext_prepare_buf(struct file *file, void *priv,
>> + struct v4l2_ext_buffer *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> +
>> + if (vb2_queue_is_busy(vdev, file))
>> + return -EBUSY;
>> + return vb2_ext_prepare_buf(vdev->queue, vdev->v4l2_dev->mdev, p);
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_prepare_buf);
>> +
>> int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
>> {
>> struct video_device *vdev = video_devdata(file);
>> @@ -1060,6 +1104,16 @@ int vb2_ioctl_querybuf(struct file *file, void *priv,
>> struct v4l2_buffer *p)
>> }
>> EXPORT_SYMBOL_GPL(vb2_ioctl_querybuf);
>>
>> +int vb2_ioctl_ext_querybuf(struct file *file, void *priv,
>> + struct v4l2_ext_buffer *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> +
>> + /* No need to call vb2_queue_is_busy(), anyone can query buffers. */
>> + return vb2_ext_querybuf(vdev->queue, p);
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_querybuf);
>> +
>> int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
>> {
>> struct video_device *vdev = video_devdata(file);
>> @@ -1070,6 +1124,17 @@ int vb2_ioctl_qbuf(struct file *file, void *priv,
>> struct v4l2_buffer *p)
>> }
>> EXPORT_SYMBOL_GPL(vb2_ioctl_qbuf);
>>
>> +int vb2_ioctl_ext_qbuf(struct file *file, void *priv,
>> + struct v4l2_ext_buffer *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> +
>> + if (vb2_queue_is_busy(vdev, file))
>> + return -EBUSY;
>> + return vb2_ext_qbuf(vdev->queue, vdev->v4l2_dev->mdev, p);
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_qbuf);
>> +
>> int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
>> {
>> struct video_device *vdev = video_devdata(file);
>> @@ -1080,6 +1145,17 @@ int vb2_ioctl_dqbuf(struct file *file, void *priv,
>> struct v4l2_buffer *p)
>> }
>> EXPORT_SYMBOL_GPL(vb2_ioctl_dqbuf);
>>
>> +int vb2_ioctl_ext_dqbuf(struct file *file, void *priv,
>> + struct v4l2_ext_buffer *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> +
>> + if (vb2_queue_is_busy(vdev, file))
>> + return -EBUSY;
>> + return vb2_ext_dqbuf(vdev->queue, p, file->f_flags & O_NONBLOCK);
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_dqbuf);
>> +
>> int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
>> {
>> struct video_device *vdev = video_devdata(file);
>> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
>> index 52ef92049073e..f334767785bd9 100644
>> --- a/include/media/videobuf2-core.h
>> +++ b/include/media/videobuf2-core.h
>> @@ -152,6 +152,8 @@ struct vb2_mem_ops {
>> * @mem_priv: private data with this plane.
>> * @dbuf: dma_buf - shared buffer object.
>> * @dbuf_mapped: flag to show whether dbuf is mapped or not
>> + * @dbuf_offset: offset where the plane starts. Usually 0, unless the buffer
>> + * is shared by all planes of a multi-planar format.
>
> The comment kind of implies that non-zero is a special case, but I wouldn't
> want driver authors to come to incorrect conclusions based on that. Do we
> actually need the last sentence at all?
I removed this field in next version to let drivers decide where to place the
planes
in the memory buffers.
>
>> * @bytesused: number of bytes occupied by data in the plane (payload).
>> * @length: size of this plane (NOT the payload) in bytes.
>> * @min_length: minimum required size of this plane (NOT the payload)
>> in bytes.
>> @@ -175,6 +177,7 @@ struct vb2_plane {
>> void *mem_priv;
>> struct dma_buf *dbuf;
>> unsigned int dbuf_mapped;
>> + unsigned int dbuf_offset;
>> unsigned int bytesused;
>> unsigned int length;
>> unsigned int min_length;
>> @@ -446,7 +449,8 @@ struct vb2_ops {
>> * struct vb2_buffer.
>> * For V4L2 this is a &struct vb2_v4l2_buffer.
>> * @fill_user_buffer: given a &vb2_buffer fill in the userspace
>> structure.
>> - * For V4L2 this is a &struct v4l2_buffer.
>> + * For V4L2 this is a &struct v4l2_buffer or
>> + * &struct v4l2_ext_buffer.
>
> Isn't it always v4l2_ext_buffer with current code?
I added a fill_user_ext_buffer for next version, since we need to keep both
v4l2_buffer and v4l2_ext_buffer to userspace.
>
> Best regards,
> Tomasz
>
Thanks for your comments,
Helen
