Hi Ioana
On Mon, Jun 29, 2020 at 06:47:11PM +0000, Ioana Ciornei wrote:
> Instead of realloc-ing the skb on the Tx path when the provided headroom
> is smaller than the HW requirements, create a Scatter/Gather frame
> descriptor with only one entry.
>
> Remove the '[drv] tx realloc frames' counter exposed previously through
> ethtool since it is no longer used.
>
> Signed-off-by: Ioana Ciornei <ioana.cior...@nxp.com>
> ---
I've been chasing down a networking regression on my LX2160A board
(Honeycomb LX2K based on CEx7 LX2160A COM) that first appeared in v5.9.
It makes the board unreliable opening outbound connections meaning
things like `apt update` or `git fetch` often can't open the connection.
It does not happen all the time but is sufficient to make the boards
built-in networking useless for workstation use.
The problem is strongly linked to warnings in the logs so I used the
warnings to bisect down to locate the cause of the regression and it
pinpointed this patch. I have confirmed that in both v5.9 and v5.10-rc7
that reverting this patch (and fixing up the merge issues) fixes the
regression and the warnings stop appearing.
A typical example of the warning is below (io-pgtable-arm.c:281 is an
error path that I guess would cause dma_map_page_attrs() to return
an error):
[ 714.464927] WARNING: CPU: 13 PID: 0 at
drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c
[ 714.464930] Modules linked in: snd_seq_dummy(E) snd_hrtimer(E)
snd_seq(E) snd_seq_device(E) snd_timer(E) snd(E) soundcore(E) bridge(E)
stp(E) llc(E) rfkill(E) caam_jr(E) crypto_engine(E) rng_core(E)
joydev(E) evdev(E) dpaa2_caam(E) caamhash_desc(E) caamalg_desc(E)
authenc(E) libdes(E) dpaa2_console(E) ofpart(E) caam(E) sg(E) error(E)
lm90(E) at24(E) spi_nor(E) mtd(E) sbsa_gwdt(E) qoriq_thermal(E)
layerscape_edac_mod(E) qoriq_cpufreq(E) drm(E) fuse(E) configfs(E)
ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E)
mbcache(E) jbd2(E) hid_generic(E) usbhid(E) hid(E) dm_crypt(E) dm_mod(E)
sd_mod(E) fsl_dpaa2_ptp(E) ptp_qoriq(E) fsl_dpaa2_eth(E)
xhci_plat_hcd(E) xhci_hcd(E) usbcore(E) aes_ce_blk(E) crypto_simd(E)
cryptd(E) aes_ce_cipher(E) ghash_ce(E) gf128mul(E) at803x(E) libaes(E)
fsl_mc_dpio(E) pcs_lynx(E) rtc_pcf2127(E) sha2_ce(E) phylink(E)
xgmac_mdio(E) regmap_spi(E) of_mdio(E) sha256_arm64(E)
i2c_mux_pca954x(E) fixed_phy(E) i2c_mux(E) sha1_ce(E) ptp(E) libphy(E)
[ 714.465131] pps_core(E) ahci_qoriq(E) libahci_platform(E) nvme(E)
libahci(E) nvme_core(E) t10_pi(E) libata(E) crc_t10dif(E)
crct10dif_generic(E) crct10dif_common(E) dwc3(E) scsi_mod(E) udc_core(E)
roles(E) ulpi(E) sdhci_of_esdhc(E) sdhci_pltfm(E) sdhci(E)
spi_nxp_fspi(E) i2c_imx(E) fixed(E)
[ 714.465192] CPU: 13 PID: 0 Comm: swapper/13 Tainted: G W E
5.10.0-rc7-00001-gba98d13279ca #52
[ 714.465196] Hardware name: SolidRun LX2160A Honeycomb (DT)
[ 714.465202] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 714.465207] pc : __arm_lpae_map+0x2d4/0x30c
[ 714.465211] lr : __arm_lpae_map+0x114/0x30c
[ 714.465215] sp : ffff80001006b340
[ 714.465219] x29: ffff80001006b340 x28: 0000002086538003
[ 714.465227] x27: 0000000000000a20 x26: 0000000000001000
[ 714.465236] x25: 0000000000000f44 x24: 00000020adf8d000
[ 714.465245] x23: 0000000000000001 x22: 0000fffffaeca000
[ 714.465253] x21: 0000000000000003 x20: ffff19b60d64d200
[ 714.465261] x19: 00000000000000ca x18: 0000000000000000
[ 714.465270] x17: 0000000000000000 x16: ffffcccb7cf3ca20
[ 714.465278] x15: 0000000000000000 x14: 0000000000000000
[ 714.465286] x13: 0000000000000003 x12: 0000000000000010
[ 714.465294] x11: 0000000000000000 x10: 0000000000000002
[ 714.465302] x9 : ffffcccb7d5b6e78 x8 : 00000000000001ff
[ 714.465311] x7 : ffff19b606538650 x6 : ffff19b606538000
[ 714.465319] x5 : 0000000000000009 x4 : 0000000000000f44
[ 714.465327] x3 : 0000000000001000 x2 : 00000020adf8d000
[ 714.465335] x1 : 0000000000000002 x0 : 0000000000000003
[ 714.465343] Call trace:
[ 714.465348] __arm_lpae_map+0x2d4/0x30c
[ 714.465353] __arm_lpae_map+0x114/0x30c
[ 714.465357] __arm_lpae_map+0x114/0x30c
[ 714.465362] __arm_lpae_map+0x114/0x30c
[ 714.465366] arm_lpae_map+0xf4/0x180
[ 714.465373] arm_smmu_map+0x4c/0xc0
[ 714.465379] __iommu_map+0x100/0x2bc
[ 714.465385] iommu_map_atomic+0x20/0x30
[ 714.465391] __iommu_dma_map+0xb0/0x110
[ 714.465397] iommu_dma_map_page+0xb8/0x120
[ 714.465404] dma_map_page_attrs+0x1a8/0x210
[ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth]
[ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth]
[ 714.465427] dev_hard_start_xmit+0x10c/0x2b0
[ 714.465433] sch_direct_xmit+0x1a0/0x550
[ 714.465438] __qdisc_run+0x140/0x670
[ 714.465443] __dev_queue_xmit+0x6c4/0xa74
[ 714.465449] dev_queue_xmit+0x20/0x2c
[ 714.465463] br_dev_queue_push_xmit+0xc4/0x1a0 [bridge]
[ 714.465476] br_forward_finish+0xdc/0xf0 [bridge]
[ 714.465489] __br_forward+0x160/0x1c0 [bridge]
[ 714.465502] br_forward+0x13c/0x160 [bridge]
[ 714.465514] br_dev_xmit+0x228/0x3b0 [bridge]
[ 714.465520] dev_hard_start_xmit+0x10c/0x2b0
[ 714.465526] __dev_queue_xmit+0x8f0/0xa74
[ 714.465531] dev_queue_xmit+0x20/0x2c
[ 714.465538] arp_xmit+0xc0/0xd0
[ 714.465544] arp_send_dst+0x78/0xa0
[ 714.465550] arp_solicit+0xf4/0x260
[ 714.465554] neigh_probe+0x64/0xb0
[ 714.465560] neigh_timer_handler+0x2f4/0x400
[ 714.465566] call_timer_fn+0x3c/0x184
[ 714.465572] __run_timers.part.0+0x2bc/0x370
[ 714.465578] run_timer_softirq+0x48/0x80
[ 714.465583] __do_softirq+0x120/0x36c
[ 714.465589] irq_exit+0xac/0x100
[ 714.465596] __handle_domain_irq+0x8c/0xf0
[ 714.465600] gic_handle_irq+0xcc/0x14c
[ 714.465605] el1_irq+0xc4/0x180
[ 714.465610] arch_cpu_idle+0x18/0x30
[ 714.465617] default_idle_call+0x4c/0x180
[ 714.465623] do_idle+0x238/0x2b0
[ 714.465629] cpu_startup_entry+0x30/0xa0
[ 714.465636] secondary_start_kernel+0x134/0x180
[ 714.465640] ---[ end trace a84a7f61b559005f ]---
Given it is the iommu code that is provoking the warning I should
probably mention that the board I have requires
arm-smmu.disable_bypass=0 on the kernel command line in order to boot.
Also if it matters I am running the latest firmware from Solidrun
which is based on LSDK-20.04.
Is there any reason for this code not to be working for LX2160A?
Daniel.
PS A few months have gone by so I decided not to trim the patch out
of this reply so you don't have to go digging!
> .../freescale/dpaa2/dpaa2-eth-debugfs.c | 7 +-
> .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 177 +++++++++++++++---
> .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 9 +-
> .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 1 -
> 4 files changed, 160 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
> index 2880ca02d7e7..5cb357c74dec 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-debugfs.c
> @@ -19,14 +19,14 @@ static int dpaa2_dbg_cpu_show(struct seq_file *file, void
> *offset)
> int i;
>
> seq_printf(file, "Per-CPU stats for %s\n", priv->net_dev->name);
> - seq_printf(file, "%s%16s%16s%16s%16s%16s%16s%16s%16s%16s\n",
> + seq_printf(file, "%s%16s%16s%16s%16s%16s%16s%16s%16s\n",
> "CPU", "Rx", "Rx Err", "Rx SG", "Tx", "Tx Err", "Tx conf",
> - "Tx SG", "Tx realloc", "Enq busy");
> + "Tx SG", "Enq busy");
>
> for_each_online_cpu(i) {
> stats = per_cpu_ptr(priv->percpu_stats, i);
> extras = per_cpu_ptr(priv->percpu_extras, i);
> - seq_printf(file,
> "%3d%16llu%16llu%16llu%16llu%16llu%16llu%16llu%16llu%16llu\n",
> + seq_printf(file,
> "%3d%16llu%16llu%16llu%16llu%16llu%16llu%16llu%16llu\n",
> i,
> stats->rx_packets,
> stats->rx_errors,
> @@ -35,7 +35,6 @@ static int dpaa2_dbg_cpu_show(struct seq_file *file, void
> *offset)
> stats->tx_errors,
> extras->tx_conf_frames,
> extras->tx_sg_frames,
> - extras->tx_reallocs,
> extras->tx_portal_busy);
> }
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> index 712bbfdbe7d7..4a264b75c035 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
> @@ -685,6 +685,86 @@ static int build_sg_fd(struct dpaa2_eth_priv *priv,
> return err;
> }
>
> +/* Create a SG frame descriptor based on a linear skb.
> + *
> + * This function is used on the Tx path when the skb headroom is not large
> + * enough for the HW requirements, thus instead of realloc-ing the skb we
> + * create a SG frame descriptor with only one entry.
> + */
> +static int build_sg_fd_single_buf(struct dpaa2_eth_priv *priv,
> + struct sk_buff *skb,
> + struct dpaa2_fd *fd)
> +{
> + struct device *dev = priv->net_dev->dev.parent;
> + struct dpaa2_eth_sgt_cache *sgt_cache;
> + struct dpaa2_sg_entry *sgt;
> + struct dpaa2_eth_swa *swa;
> + dma_addr_t addr, sgt_addr;
> + void *sgt_buf = NULL;
> + int sgt_buf_size;
> + int err;
> +
> + /* Prepare the HW SGT structure */
> + sgt_cache = this_cpu_ptr(priv->sgt_cache);
> + sgt_buf_size = priv->tx_data_offset + sizeof(struct dpaa2_sg_entry);
> +
> + if (sgt_cache->count == 0)
> + sgt_buf = kzalloc(sgt_buf_size + DPAA2_ETH_TX_BUF_ALIGN,
> + GFP_ATOMIC);
> + else
> + sgt_buf = sgt_cache->buf[--sgt_cache->count];
> + if (unlikely(!sgt_buf))
> + return -ENOMEM;
> +
> + sgt_buf = PTR_ALIGN(sgt_buf, DPAA2_ETH_TX_BUF_ALIGN);
> + sgt = (struct dpaa2_sg_entry *)(sgt_buf + priv->tx_data_offset);
> +
> + addr = dma_map_single(dev, skb->data, skb->len, DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(dev, addr))) {
> + err = -ENOMEM;
> + goto data_map_failed;
> + }
> +
> + /* Fill in the HW SGT structure */
> + dpaa2_sg_set_addr(sgt, addr);
> + dpaa2_sg_set_len(sgt, skb->len);
> + dpaa2_sg_set_final(sgt, true);
> +
> + /* Store the skb backpointer in the SGT buffer */
> + swa = (struct dpaa2_eth_swa *)sgt_buf;
> + swa->type = DPAA2_ETH_SWA_SINGLE;
> + swa->single.skb = skb;
> + swa->sg.sgt_size = sgt_buf_size;
> +
> + /* Separately map the SGT buffer */
> + sgt_addr = dma_map_single(dev, sgt_buf, sgt_buf_size,
> DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(dev, sgt_addr))) {
> + err = -ENOMEM;
> + goto sgt_map_failed;
> + }
> +
> + dpaa2_fd_set_offset(fd, priv->tx_data_offset);
> + dpaa2_fd_set_format(fd, dpaa2_fd_sg);
> + dpaa2_fd_set_addr(fd, sgt_addr);
> + dpaa2_fd_set_len(fd, skb->len);
> + dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA);
> +
> + if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
> + enable_tx_tstamp(fd, sgt_buf);
> +
> + return 0;
> +
> +sgt_map_failed:
> + dma_unmap_single(dev, addr, skb->len, DMA_BIDIRECTIONAL);
> +data_map_failed:
> + if (sgt_cache->count >= DPAA2_ETH_SGT_CACHE_SIZE)
> + kfree(sgt_buf);
> + else
> + sgt_cache->buf[sgt_cache->count++] = sgt_buf;
> +
> + return err;
> +}
> +
> /* Create a frame descriptor based on a linear skb */
> static int build_single_fd(struct dpaa2_eth_priv *priv,
> struct sk_buff *skb,
> @@ -743,13 +823,16 @@ static void free_tx_fd(const struct dpaa2_eth_priv
> *priv,
> const struct dpaa2_fd *fd, bool in_napi)
> {
> struct device *dev = priv->net_dev->dev.parent;
> - dma_addr_t fd_addr;
> + dma_addr_t fd_addr, sg_addr;
> struct sk_buff *skb = NULL;
> unsigned char *buffer_start;
> struct dpaa2_eth_swa *swa;
> u8 fd_format = dpaa2_fd_get_format(fd);
> u32 fd_len = dpaa2_fd_get_len(fd);
>
> + struct dpaa2_eth_sgt_cache *sgt_cache;
> + struct dpaa2_sg_entry *sgt;
> +
> fd_addr = dpaa2_fd_get_addr(fd);
> buffer_start = dpaa2_iova_to_virt(priv->iommu_domain, fd_addr);
> swa = (struct dpaa2_eth_swa *)buffer_start;
> @@ -769,16 +852,29 @@ static void free_tx_fd(const struct dpaa2_eth_priv
> *priv,
> DMA_BIDIRECTIONAL);
> }
> } else if (fd_format == dpaa2_fd_sg) {
> - skb = swa->sg.skb;
> + if (swa->type == DPAA2_ETH_SWA_SG) {
> + skb = swa->sg.skb;
> +
> + /* Unmap the scatterlist */
> + dma_unmap_sg(dev, swa->sg.scl, swa->sg.num_sg,
> + DMA_BIDIRECTIONAL);
> + kfree(swa->sg.scl);
>
> - /* Unmap the scatterlist */
> - dma_unmap_sg(dev, swa->sg.scl, swa->sg.num_sg,
> - DMA_BIDIRECTIONAL);
> - kfree(swa->sg.scl);
> + /* Unmap the SGT buffer */
> + dma_unmap_single(dev, fd_addr, swa->sg.sgt_size,
> + DMA_BIDIRECTIONAL);
> + } else {
> + skb = swa->single.skb;
>
> - /* Unmap the SGT buffer */
> - dma_unmap_single(dev, fd_addr, swa->sg.sgt_size,
> - DMA_BIDIRECTIONAL);
> + /* Unmap the SGT Buffer */
> + dma_unmap_single(dev, fd_addr, swa->single.sgt_size,
> + DMA_BIDIRECTIONAL);
> +
> + sgt = (struct dpaa2_sg_entry *)(buffer_start +
> + priv->tx_data_offset);
> + sg_addr = dpaa2_sg_get_addr(sgt);
> + dma_unmap_single(dev, sg_addr, skb->len,
> DMA_BIDIRECTIONAL);
> + }
> } else {
> netdev_dbg(priv->net_dev, "Invalid FD format\n");
> return;
> @@ -808,8 +904,17 @@ static void free_tx_fd(const struct dpaa2_eth_priv *priv,
> }
>
> /* Free SGT buffer allocated on tx */
> - if (fd_format != dpaa2_fd_single)
> - skb_free_frag(buffer_start);
> + if (fd_format != dpaa2_fd_single) {
> + sgt_cache = this_cpu_ptr(priv->sgt_cache);
> + if (swa->type == DPAA2_ETH_SWA_SG) {
> + skb_free_frag(buffer_start);
> + } else {
> + if (sgt_cache->count >= DPAA2_ETH_SGT_CACHE_SIZE)
> + kfree(buffer_start);
> + else
> + sgt_cache->buf[sgt_cache->count++] =
> buffer_start;
> + }
> + }
>
> /* Move on with skb release */
> napi_consume_skb(skb, in_napi);
> @@ -833,22 +938,6 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb,
> struct net_device *net_dev)
> percpu_extras = this_cpu_ptr(priv->percpu_extras);
>
> needed_headroom = dpaa2_eth_needed_headroom(priv, skb);
> - if (skb_headroom(skb) < needed_headroom) {
> - struct sk_buff *ns;
> -
> - ns = skb_realloc_headroom(skb, needed_headroom);
> - if (unlikely(!ns)) {
> - percpu_stats->tx_dropped++;
> - goto err_alloc_headroom;
> - }
> - percpu_extras->tx_reallocs++;
> -
> - if (skb->sk)
> - skb_set_owner_w(ns, skb->sk);
> -
> - dev_kfree_skb(skb);
> - skb = ns;
> - }
>
> /* We'll be holding a back-reference to the skb until Tx Confirmation;
> * we don't want that overwritten by a concurrent Tx with a cloned skb.
> @@ -867,6 +956,10 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb,
> struct net_device *net_dev)
> err = build_sg_fd(priv, skb, &fd);
> percpu_extras->tx_sg_frames++;
> percpu_extras->tx_sg_bytes += skb->len;
> + } else if (skb_headroom(skb) < needed_headroom) {
> + err = build_sg_fd_single_buf(priv, skb, &fd);
> + percpu_extras->tx_sg_frames++;
> + percpu_extras->tx_sg_bytes += skb->len;
> } else {
> err = build_single_fd(priv, skb, &fd);
> }
> @@ -924,7 +1017,6 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb,
> struct net_device *net_dev)
> return NETDEV_TX_OK;
>
> err_build_fd:
> -err_alloc_headroom:
> dev_kfree_skb(skb);
>
> return NETDEV_TX_OK;
> @@ -1161,6 +1253,22 @@ static int refill_pool(struct dpaa2_eth_priv *priv,
> return 0;
> }
>
> +static void dpaa2_eth_sgt_cache_drain(struct dpaa2_eth_priv *priv)
> +{
> + struct dpaa2_eth_sgt_cache *sgt_cache;
> + u16 count;
> + int k, i;
> +
> + for_each_online_cpu(k) {
> + sgt_cache = per_cpu_ptr(priv->sgt_cache, k);
> + count = sgt_cache->count;
> +
> + for (i = 0; i < count; i++)
> + kfree(sgt_cache->buf[i]);
> + sgt_cache->count = 0;
> + }
> +}
> +
> static int pull_channel(struct dpaa2_eth_channel *ch)
> {
> int err;
> @@ -1562,6 +1670,9 @@ static int dpaa2_eth_stop(struct net_device *net_dev)
> /* Empty the buffer pool */
> drain_pool(priv);
>
> + /* Empty the Scatter-Gather Buffer cache */
> + dpaa2_eth_sgt_cache_drain(priv);
> +
> return 0;
> }
>
> @@ -3846,6 +3957,13 @@ static int dpaa2_eth_probe(struct fsl_mc_device
> *dpni_dev)
> goto err_alloc_percpu_extras;
> }
>
> + priv->sgt_cache = alloc_percpu(*priv->sgt_cache);
> + if (!priv->sgt_cache) {
> + dev_err(dev, "alloc_percpu(sgt_cache) failed\n");
> + err = -ENOMEM;
> + goto err_alloc_sgt_cache;
> + }
> +
> err = netdev_init(net_dev);
> if (err)
> goto err_netdev_init;
> @@ -3914,6 +4032,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device
> *dpni_dev)
> err_alloc_rings:
> err_csum:
> err_netdev_init:
> + free_percpu(priv->sgt_cache);
> +err_alloc_sgt_cache:
> free_percpu(priv->percpu_extras);
> err_alloc_percpu_extras:
> free_percpu(priv->percpu_stats);
> @@ -3959,6 +4079,7 @@ static int dpaa2_eth_remove(struct fsl_mc_device
> *ls_dev)
> fsl_mc_free_irqs(ls_dev);
>
> free_rings(priv);
> + free_percpu(priv->sgt_cache);
> free_percpu(priv->percpu_stats);
> free_percpu(priv->percpu_extras);
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> index 2d7ada0f0dbd..9e4ceb92f240 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
> @@ -125,6 +125,7 @@ struct dpaa2_eth_swa {
> union {
> struct {
> struct sk_buff *skb;
> + int sgt_size;
> } single;
> struct {
> struct sk_buff *skb;
> @@ -282,7 +283,6 @@ struct dpaa2_eth_drv_stats {
> __u64 tx_conf_bytes;
> __u64 tx_sg_frames;
> __u64 tx_sg_bytes;
> - __u64 tx_reallocs;
> __u64 rx_sg_frames;
> __u64 rx_sg_bytes;
> /* Enqueues retried due to portal busy */
> @@ -395,6 +395,12 @@ struct dpaa2_eth_cls_rule {
> u8 in_use;
> };
>
> +#define DPAA2_ETH_SGT_CACHE_SIZE 256
> +struct dpaa2_eth_sgt_cache {
> + void *buf[DPAA2_ETH_SGT_CACHE_SIZE];
> + u16 count;
> +};
> +
> /* Driver private data */
> struct dpaa2_eth_priv {
> struct net_device *net_dev;
> @@ -409,6 +415,7 @@ struct dpaa2_eth_priv {
>
> u8 num_channels;
> struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS];
> + struct dpaa2_eth_sgt_cache __percpu *sgt_cache;
>
> struct dpni_attr dpni_attrs;
> u16 dpni_ver_major;
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
> b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
> index e88269fe3de7..c4cbbcaa9a3f 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
> @@ -43,7 +43,6 @@ static char dpaa2_ethtool_extras[][ETH_GSTRING_LEN] = {
> "[drv] tx conf bytes",
> "[drv] tx sg frames",
> "[drv] tx sg bytes",
> - "[drv] tx realloc frames",
> "[drv] rx sg frames",
> "[drv] rx sg bytes",
> "[drv] enqueue portal busy",
> --
> 2.25.1
