>From 0bca662f68e7ffe84f333d7d26df25d846713db2 Mon Sep 17 00:00:00 2001
From: eric miao <[EMAIL PROTECTED]>
Date: Sat, 15 Dec 2007 12:07:26 +0800
Subject: [PATCH] gpiolib: obsolete drivers/i2c/chips/pca9539.c
for the following reasons:
1. there is currently no known users of this driver
2. the functionality of this driver is well supported with the recent
proposed drivers/gpio/pca9539.c, using GPIO_LIB
Signed-off-by: eric miao <[EMAIL PROTECTED]>
Acked-by: Ben Gardner <[EMAIL PROTECTED]>
---
drivers/i2c/chips/Kconfig | 10 --
drivers/i2c/chips/Makefile | 1 -
drivers/i2c/chips/pca9539.c | 196 -------------------------------------------
3 files changed, 0 insertions(+), 207 deletions(-)
delete mode 100644 drivers/i2c/chips/pca9539.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 2e1c24f..a676f57 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -65,16 +65,6 @@ config SENSORS_PCF8574
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
-config SENSORS_PCA9539
- tristate "Philips PCA9539 16-bit I/O port"
- depends on EXPERIMENTAL
- help
- If you say yes here you get support for the Philips PCA9539
- 16-bit I/O port.
-
- This driver can also be built as a module. If so, the module
- will be called pca9539.
-
config SENSORS_PCF8591
tristate "Philips PCF8591"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index ca924e1..bc9e9ca 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_M41T00) += m41t00.o
-obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
deleted file mode 100644
index f43c4e7..0000000
--- a/drivers/i2c/chips/pca9539.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- pca9539.c - 16-bit I/O port with interrupt and reset
-
- Copyright (C) 2005 Ben Gardner <[EMAIL PROTECTED]>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/hwmon-sysfs.h>
-
-/* Addresses to scan */
-static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(pca9539);
-
-enum pca9539_cmd
-{
- PCA9539_INPUT_0 = 0,
- PCA9539_INPUT_1 = 1,
- PCA9539_OUTPUT_0 = 2,
- PCA9539_OUTPUT_1 = 3,
- PCA9539_INVERT_0 = 4,
- PCA9539_INVERT_1 = 5,
- PCA9539_DIRECTION_0 = 6,
- PCA9539_DIRECTION_1 = 7,
-};
-
-static int pca9539_attach_adapter(struct i2c_adapter *adapter);
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pca9539_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver pca9539_driver = {
- .driver = {
- .name = "pca9539",
- },
- .attach_adapter = pca9539_attach_adapter,
- .detach_client = pca9539_detach_client,
-};
-
-struct pca9539_data {
- struct i2c_client client;
-};
-
-/* following are the sysfs callback functions */
-static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
- struct i2c_client *client = to_i2c_client(dev);
- return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client,
- psa->index));
-}
-
-static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
- struct i2c_client *client = to_i2c_client(dev);
- unsigned long val = simple_strtoul(buf, NULL, 0);
- if (val > 0xff)
- return -EINVAL;
- i2c_smbus_write_byte_data(client, psa->index, val);
- return count;
-}
-
-/* Define the device attributes */
-
-#define PCA9539_ENTRY_RO(name, cmd_idx) \
- static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx)
-
-#define PCA9539_ENTRY_RW(name, cmd_idx) \
- static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \
- pca9539_store, cmd_idx)
-
-PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0);
-PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1);
-PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0);
-PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1);
-PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0);
-PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1);
-PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0);
-PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1);
-
-static struct attribute *pca9539_attributes[] = {
- &sensor_dev_attr_input0.dev_attr.attr,
- &sensor_dev_attr_input1.dev_attr.attr,
- &sensor_dev_attr_output0.dev_attr.attr,
- &sensor_dev_attr_output1.dev_attr.attr,
- &sensor_dev_attr_invert0.dev_attr.attr,
- &sensor_dev_attr_invert1.dev_attr.attr,
- &sensor_dev_attr_direction0.dev_attr.attr,
- &sensor_dev_attr_direction1.dev_attr.attr,
- NULL
-};
-
-static struct attribute_group pca9539_defattr_group = {
- .attrs = pca9539_attributes,
-};
-
-static int pca9539_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, pca9539_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- struct pca9539_data *data;
- int err = 0;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet. */
- if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &pca9539_driver;
- new_client->flags = 0;
-
- if (kind < 0) {
- /* Detection: the pca9539 only has 8 registers (0-7).
- A read of 7 should succeed, but a read of 8 should fail. */
- if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
- (i2c_smbus_read_byte_data(new_client, 8) >= 0))
- goto exit_kfree;
- }
-
- strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_kfree;
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&new_client->dev.kobj,
- &pca9539_defattr_group);
- if (err)
- goto exit_detach;
-
- return 0;
-
-exit_detach:
- i2c_detach_client(new_client);
-exit_kfree:
- kfree(data);
-exit:
- return err;
-}
-
-static int pca9539_detach_client(struct i2c_client *client)
-{
- int err;
-
- sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-static int __init pca9539_init(void)
-{
- return i2c_add_driver(&pca9539_driver);
-}
-
-static void __exit pca9539_exit(void)
-{
- i2c_del_driver(&pca9539_driver);
-}
-
-MODULE_AUTHOR("Ben Gardner <[EMAIL PROTECTED]>");
-MODULE_DESCRIPTION("PCA9539 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pca9539_init);
-module_exit(pca9539_exit);
-
--
1.5.2.5.GIT
--
Cheers
- eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
