Friedrich Göpel wrote:
> Hi,
>
> While testing 2.6.24-rc5 I noticed my Plextor DVD writer locking up as
> soon I start k3b (KDE CD burning app) with the following:
>
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata5.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
> cdb ac 00 00 00 00 00 00 00 00 01 03 00 00 00 00 00
> res 58/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
> ata5.00: status: { DRDY DRQ }
> ata5: soft resetting link
> ata5.00: qc timeout (cmd 0xa1)
> ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata5.00: revalidation failed (errno=-5)
> ata5: failed to recover some devices, retrying in 5 secs
> ata5: port is slow to respond, please be patient (Status 0x80)
> ata5: device not ready (errno=-16), forcing hardreset
> ata5: soft resetting link
> ata5.00: qc timeout (cmd 0xa1)
> ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata5.00: revalidation failed (errno=-5)
> ata5: failed to recover some devices, retrying in 5 secs
> ata5: port is slow to respond, please be patient (Status 0x80)
> ata5: device not ready (errno=-16), forcing hardreset
> ata5: soft resetting link
> ata5.00: qc timeout (cmd 0xa1)
> ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata5.00: revalidation failed (errno=-5)
> ata5.00: disabled
> ata5: port is slow to respond, please be patient (Status 0x80)
> ata5: device not ready (errno=-16), forcing hardreset
> ata5: soft resetting link
> ata5: EH complete
>
>
> Whereas doing the same on .23 just yields:
>
> ata5.00: 16 bytes trailing data
> ata5.00: 16 bytes trailing data
> ata5.00: 16 bytes trailing data
> ata5.00: 16 bytes trailing data
>
>
> On .24 the drive is completely irresponsive afterwards, until I reboot.
> Burning a DVD from a terminal with growisofs works though, if I don't start
> k3b.
Known problem. Patches posted.
http://thread.gmane.org/gmane.linux.ide/26215
--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
