On Dec 12, 2007 10:16 AM, Andrew Morton <[EMAIL PROTECTED]> wrote:
> What was wrong with it?
>
Hi,
on loading only one serial port was present and it wasn't working.
After looking in the data sheet I realized that the base address was
wrong. For further reference here is lspci and relevant dmesg output:
02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O
Controller (rev 01) (prog-if 02)
Subsystem: LSI Logic / Symbios Logic Unknown device 0022
Flags: medium devsel, IRQ 19
I/O ports at df00 [size=8]
I/O ports at de00 [size=8]
I/O ports at dd00 [size=8]
I/O ports at dc00 [size=8]
I/O ports at db00 [size=8]
I/O ports at da00 [size=16]
parport1: PC-style at 0xdd00 [PCSPP,TRISTATE]
parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP]
0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A
0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A
--
Christian Pellegrin, see http://www.evolware.org/chri/
"Real Programmers don't play tennis, or any other sport which requires
you to change clothes. Mountain climbing is OK, and Real Programmers
wear their climbing boots to work in case a mountain should suddenly
spring up in the middle of the computer room."
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
