Hi tglx,
On 11/25/20 12:54 PM, Thomas Gleixner wrote:
> Stefan,
>
> On Wed, Sep 16 2020 at 12:12, Stefan Bühler wrote:
>
> sorry for the delay. This fell through the cracks.
>
>> this quirk breaks our serial ports PCIe card (i.e. we don't see any
>> output from the connected devices; no idea whether anything we send
>> reaches them):
>>
>> 05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI
>> Bridge (rev aa)
>> 06:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950
>> UART) function 0 (Uart)
>> 06:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
>> function 0 (Disabled)
>> 06:01.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950
>> UART) function 0 (Uart)
>> 06:01.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
>> function 0 (Disabled)
>
> Can you please provide the output of:
>
> for ID in 05:00.0 06:00.0 06:00.1 06:01.0 06:01.1; do lspci -s $ID -vvv; done
>
See attachment.
Also I boot the affected systems now with "pci=noioapicquirk", which
"solves" the issue too (instead of patching the kernel).
cheers,
Stefan
05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI
Bridge (rev aa) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fb400000-fb4fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950
UART) function 0 (Uart) (prog-if 06 [16950])
Subsystem: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
function 0 (Uart)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: I/O ports at e0e0 [size=32]
Region 1: Memory at fb407000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at e0c0 [size=32]
Region 3: Memory at fb406000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
06:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function
0 (Disabled)
Subsystem: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
function 0 (Disabled)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Region 0: I/O ports at e0a0 [disabled] [size=32]
Region 1: Memory at fb405000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Region 2: I/O ports at e080 [disabled] [size=32]
Region 3: Memory at fb404000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Capabilities: <access denied>
06:01.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950
UART) function 0 (Uart) (prog-if 06 [16950])
Subsystem: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
function 0 (Uart)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Region 0: I/O ports at e060 [size=32]
Region 1: Memory at fb403000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at e040 [size=32]
Region 3: Memory at fb402000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
06:01.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function
0 (Disabled)
Subsystem: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART)
function 0 (Disabled)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Region 0: I/O ports at e020 [disabled] [size=32]
Region 1: Memory at fb401000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Region 2: I/O ports at e000 [disabled] [size=32]
Region 3: Memory at fb400000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Capabilities: <access denied>
