+ unsigned long size)
+{
+ if (static_branch_unlikely(&uaccess_flush_key))
+ do_uaccess_flush();
+}
+
+#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -200,6 +200,14 @@ label##3: \
FTR_ENTRY_OFFSET 955b-956b; \
.popsection;
+#define UACCESS_FLUSH_FIXUP_SECTION \
+959: \
+ .pushsection __uaccess_flush_fixup,"a"; \
+ .align 2; \
+960: \
+ FTR_ENTRY_OFFSET 959b-960b; \
+ .popsection;
+
#define ENTRY_FLUSH_FIXUP_SECTION \
957: \
.pushsection __entry_flush_fixup,"a"; \
@@ -242,6 +250,7 @@ extern long stf_barrier_fallback;
extern long entry_flush_fallback;
extern long __start___stf_entry_barrier_fixup,
__stop___stf_entry_barrier_fixup;
extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -6,10 +6,14 @@
#include <asm/pgtable.h>
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/book3s/64/kup-radix.h>
+#else
static inline void allow_user_access(void __user *to, const void __user *from,
unsigned long size) { }
static inline void prevent_user_access(void __user *to, const void __user
*from,
unsigned long size) { }
+#endif /* CONFIG_PPC_BOOK3S_64 */
static inline void allow_read_from_user(const void __user *from, unsigned long size)
{
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -87,6 +87,8 @@ static inline bool security_ftr_enabled(
// The L1-D cache should be flushed when entering the kernel
#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull
+// The L1-D cache should be flushed after user accesses from the kernel
+#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull
// Features enabled by default
#define SEC_FTR_DEFAULT \
@@ -94,6 +96,7 @@ static inline bool security_ftr_enabled(
SEC_FTR_L1D_FLUSH_PR | \
SEC_FTR_BNDS_CHK_SPEC_BAR | \
SEC_FTR_L1D_FLUSH_ENTRY | \
+ SEC_FTR_L1D_FLUSH_UACCESS | \
SEC_FTR_FAVOUR_SECURITY)
#endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -46,6 +46,7 @@ void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
+void do_uaccess_flush_fixups(enum l1d_flush_type types);
void do_entry_flush_fixups(enum l1d_flush_type types);
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1630,14 +1630,9 @@ stf_barrier_fallback:
.endr
blr
- .globl rfi_flush_fallback
-rfi_flush_fallback:
- SET_SCRATCH0(r13);
- GET_PACA(r13);
- std r9,PACA_EXRFI+EX_R9(r13)
- std r10,PACA_EXRFI+EX_R10(r13)
- std r11,PACA_EXRFI+EX_R11(r13)
- mfctr r9
+
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SIZE(r13)
srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
@@ -1663,7 +1658,18 @@ rfi_flush_fallback:
ld r11,(0x80 + 8)*7(r10)
addi r10,r10,0x80*8
bdnz 1b
+.endm
+
+ .globl rfi_flush_fallback
+rfi_flush_fallback:
+ SET_SCRATCH0(r13);
+ GET_PACA(r13);
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -1679,32 +1685,7 @@ hrfi_flush_fallback:
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load adresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -1718,38 +1699,14 @@ entry_flush_fallback:
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load addresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
ld r11,PACA_EXRFI+EX_R11(r13)
blr
+
/*
* Hash table stuff
*/
@@ -1909,3 +1866,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_bad_stack
b 1b
+
+_KPROBE(do_uaccess_flush)
+ UACCESS_FLUSH_FIXUP_SECTION
+ nop
+ nop
+ nop
+ blr
+ L1D_DISPLACEMENT_FLUSH
+ blr
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,6 +6,9 @@
#include <asm/cacheflush.h>
#include <asm/epapr_hcalls.h>
#include <asm/uaccess.h>
+#ifdef CONFIG_PPC64
+#include <asm/book3s/64/kup-radix.h>
+#endif
EXPORT_SYMBOL(flush_dcache_range);
EXPORT_SYMBOL(flush_icache_range);
@@ -46,3 +49,7 @@ EXPORT_SYMBOL(epapr_hypercall_start);
EXPORT_SYMBOL(current_stack_pointer);
EXPORT_SYMBOL(__arch_clear_user);
+
+#ifdef CONFIG_PPC64
+EXPORT_SYMBOL(do_uaccess_flush);
+#endif
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -845,8 +845,12 @@ static enum l1d_flush_type enabled_flush
static void *l1d_flush_fallback_area;
static bool no_rfi_flush;
static bool no_entry_flush;
+static bool no_uaccess_flush;
bool rfi_flush;
bool entry_flush;
+bool uaccess_flush;
+DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
+EXPORT_SYMBOL(uaccess_flush_key);
static int __init handle_no_rfi_flush(char *p)
{
@@ -864,6 +868,14 @@ static int __init handle_no_entry_flush(
}
early_param("no_entry_flush", handle_no_entry_flush);
+static int __init handle_no_uaccess_flush(char *p)
+{
+ pr_info("uaccess-flush: disabled on command line.");
+ no_uaccess_flush = true;
+ return 0;
+}
+early_param("no_uaccess_flush", handle_no_uaccess_flush);
+
/*
* The RFI flush is not KPTI, but because users will see doco that says to use
* nopti we hijack that option here to also disable the RFI flush.
@@ -907,6 +919,23 @@ void entry_flush_enable(bool enable)
entry_flush = enable;
}
+void uaccess_flush_enable(bool enable)
+{
+ if (enable) {
+ do_uaccess_flush_fixups(enabled_flush_types);
+ if (static_key_initialized)
+ static_branch_enable(&uaccess_flush_key);
+ else
+ printk(KERN_DEBUG "uaccess-flush: deferring static key until
after static key initialization\n");
+ on_each_cpu(do_nothing, NULL, 1);
+ } else {
+ static_branch_disable(&uaccess_flush_key);
+ do_uaccess_flush_fixups(L1D_FLUSH_NONE);
+ }
+
+ uaccess_flush = enable;
+}
+
static void __ref init_fallback_flush(void)
{
u64 l1d_size, limit;
@@ -961,6 +990,15 @@ void setup_entry_flush(bool enable)
entry_flush_enable(enable);
}
+void setup_uaccess_flush(bool enable)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!no_uaccess_flush)
+ uaccess_flush_enable(enable);
+}
+
#ifdef CONFIG_DEBUG_FS
static int rfi_flush_set(void *data, u64 val)
{
@@ -1014,12 +1052,54 @@ static int entry_flush_get(void *data, u
DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
+static int uaccess_flush_set(void *data, u64 val)
+{
+ bool enable;
+
+ if (val == 1)
+ enable = true;
+ else if (val == 0)
+ enable = false;
+ else
+ return -EINVAL;
+
+ /* Only do anything if we're changing state */
+ if (enable != uaccess_flush)
+ uaccess_flush_enable(enable);
+
+ return 0;
+}
+
+static int uaccess_flush_get(void *data, u64 *val)
+{
+ *val = uaccess_flush ? 1 : 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set,
"%llu\n");
+
+
static __init int rfi_flush_debugfs_init(void)
{
debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL,
&fops_rfi_flush);
debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL,
&fops_entry_flush);
+ debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL,
&fops_uaccess_flush);
return 0;
}
device_initcall(rfi_flush_debugfs_init);
#endif
+
+/*
+ * setup_uaccess_flush runs before jump_label_init, so we can't do the setup
+ * there. Do it now instead.
+ */
+static __init int uaccess_flush_static_key_init(void)
+{
+ if (uaccess_flush) {
+ printk(KERN_DEBUG "uaccess-flush: switching on static key\n");
+ static_branch_enable(&uaccess_flush_key);
+ }
+ return 0;
+}
+early_initcall(uaccess_flush_static_key_init);
#endif /* CONFIG_PPC_BOOK3S_64 */
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -81,6 +81,13 @@ SECTIONS
}
. = ALIGN(8);
+ __uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) {
+ __start___uaccess_flush_fixup = .;
+ *(__uaccess_flush_fixup)
+ __stop___uaccess_flush_fixup = .;
+ }
+
+ . = ALIGN(8);
__entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
__start___entry_flush_fixup = .;
*(__entry_flush_fixup)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -229,6 +229,56 @@ void do_stf_barrier_fixups(enum stf_barr
do_stf_exit_barrier_fixups(types);
}
+void do_uaccess_flush_fixups(enum l1d_flush_type types)
+{
+ unsigned int instrs[4], *dest;
+ long *start, *end;
+ int i;
+
+ start = PTRRELOC(&__start___uaccess_flush_fixup);
+ end = PTRRELOC(&__stop___uaccess_flush_fixup);
+
+ instrs[0] = 0x60000000; /* nop */
+ instrs[1] = 0x60000000; /* nop */
+ instrs[2] = 0x60000000; /* nop */
+ instrs[3] = 0x4e800020; /* blr */
+
+ i = 0;
+ if (types == L1D_FLUSH_FALLBACK) {
+ instrs[3] = 0x60000000; /* nop */
+ /* fallthrough to fallback flush */
+ }
+
+ if (types & L1D_FLUSH_ORI) {
+ instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+ instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+ }
+
+ if (types & L1D_FLUSH_MTTRIG)
+ instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+ for (i = 0; start < end; start++, i++) {
+ dest = (void *)start + *start;
+
+ pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+ patch_instruction(dest, instrs[0]);
+
+ patch_instruction((dest + 1), instrs[1]);
+ patch_instruction((dest + 2), instrs[2]);
+ patch_instruction((dest + 3), instrs[3]);
+ }
+
+ printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
+ (types == L1D_FLUSH_NONE) ? "no" :
+ (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
+ (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
+ ? "ori+mttrig type"
+ : "ori type" :
+ (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
+ : "unknown");
+}
+
void do_entry_flush_fixups(enum l1d_flush_type types)
{
unsigned int instrs[3], *dest;
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -126,9 +126,10 @@ static void pnv_setup_rfi_flush(void)
/*
* 4.4 doesn't support Power9 bare metal, so we don't need to flush
- * here - the flush fixes a P9 specific vulnerability.
+ * here - the flushes fix a P9 specific vulnerability.
*/
security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+ security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \
@@ -140,6 +141,10 @@ static void pnv_setup_rfi_flush(void)
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
}
static void __init pnv_setup_arch(void)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -588,6 +588,10 @@ void pseries_setup_rfi_flush(void)
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
}
static void __init pSeries_setup_arch(void)
Patches currently in stable-queue which might be from d...@axtens.net are
queue-4.4/powerpc-add-a-framework-for-user-access-tracking.patch
queue-4.4/powerpc-implement-user_access_begin-and-friends.patch
queue-4.4/powerpc-uaccess-evaluate-macro-arguments-once-before-user-access-is-allowed.patch
queue-4.4/powerpc-64s-flush-l1d-after-user-accesses.patch
queue-4.4/powerpc-64s-move-some-exception-handlers-out-of-line.patch
queue-4.4/powerpc-64s-flush-l1d-on-kernel-entry.patch
queue-4.4/powerpc-fix-__clear_user-with-kuap-enabled.patch
queue-4.4/powerpc-64s-define-maskable_relon_exception_pseries_ool.patch
.
