[PATCH] pinctrl: fix low level output voltage issue

[Zhiyong Tao]

This patch is used to fix low level output voltage issue.
A pin is changed from input pull-up to output high.
The Dout value of the pin is default as 0.
If we change the direction of the pin before the dout value of the pin,
It maybe produce a low level output voltage between "input pull-up" and
"output high".

Signed-off-by: Zhiyong Tao <zhiyong....@mediatek.com>
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c 
b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 623af4410b07..039ce9be19c5 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -247,13 +247,13 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, 
unsigned int pin,
                err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
                break;
        case PIN_CONFIG_OUTPUT:
-               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-                                      MTK_OUTPUT);
+               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
+                                      arg);
                if (err)
                        goto err;
 
-               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
-                                      arg);
+               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
+                                      MTK_OUTPUT);
                break;
        case PIN_CONFIG_INPUT_SCHMITT:
        case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-- 
2.18.0