The maestro3 driver in ac9 oopses, due to trying to deref an
unitialized pointer. Here's the oops:
ksymoops 2.3.7 on i686 2.4.1-pre7. Options used
-v /boot/vmlinuz (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.1-pre7/ (default)
-m /boot/System.map (specified)
Error (pclose_local): read_nm_symbols pclose failed 0x100
Warning (read_vmlinux): no kernel symbols in vmlinux, is /boot/vmlinuz a valid vmlinux
file?
Warning (expand_objects): object
/lib/modules/2.4.1-pre7/kernel/drivers/sound/maestro3.o for module maestro3 has
changed since load
Warning (expand_objects): object
/lib/modules/2.4.1-pre7/kernel/drivers/sound/soundcore.o for module soundcore has
changed since load
Warning (expand_objects): object
/lib/modules/2.4.1-pre7/kernel/drivers/sound/ac97_codec.o for module ac97_codec has
changed since load
Warning (expand_objects): object
/lib/modules/2.4.1-pre7/kernel/drivers/net/pcmcia/xirc2ps_cs.o for module xirc2ps_cs
has changed since load
Warning (expand_objects): object /lib/modules/2.4.1-pre7/kernel/fs/nls/nls_iso8859-1.o
for module nls_iso8859-1 has changed since load
Warning (expand_objects): object /lib/modules/2.4.1-pre7/kernel/fs/nls/nls_cp437.o for
module nls_cp437 has changed since load
Warning (expand_objects): object /lib/modules/2.4.1-pre7/kernel/fs/vfat/vfat.o f
or module vfat has changed since load
Warning (expand_objects): object /lib/modules/2.4.1-pre7/kernel/fs/fat/fat.o for
module fat has changed since load
Unable to handle kernel NULL pointer dereference at virtual address 0000000c
c7036951
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c7036951>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 0000004b ebx: 00000000 ecx: c5618000 edx: c023b648
esi: c5044000 edi: c5043e00 ebp: c5043f9c esp: c4d53ec8
ds: 0018 es: 0018 ss: 0018
Process insmod (pid: 378, stackpage=c4d53000)
Stack: c7038b2c c5faa800 c7038ce0 00000000 c5043e00 c5043f28 c5043f54 00000000
00000000 00000001 00bb1028 c01a3b2e c5faa800 c7038b2c c5faa800 c7038ce0
00000000 00005ee0 c01a3b94 c7038ce0 c5faa800 c7033000 00000002 00000002
Call Trace: [<c7038b2c>] [<c7038ce0>] [<c01a3b2e>] [<c7038b2c>] [<c7038ce0>]
[<c01a3b94>] [<c7038ce0>]
[<c7033000>] [<c7036b4a>] [<c7038ce0>] [<c01157fd>] [<c7031000>] [<c7033060>]
[<c0108d5f>]
Code: 89 7b 0c 57 e8 22 fc ff ff 57 e8 20 c9 ff ff 8b 44 24 28 50
>>EIP; c7036951 <[maestro3]m3_probe+3b1/498> <=====
Trace; c7038b2c <[maestro3]m3_id_table+1c/70>
Trace; c7038ce0 <[maestro3]m3_pci_driver+0/1f>
Trace; c01a3b2e <pci_announce_device+36/54>
Trace; c7038b2c <[maestro3]m3_id_table+1c/70>
Trace; c7038ce0 <[maestro3]m3_pci_driver+0/1f>
Trace; c01a3b94 <pci_register_driver+48/60>
Trace; c7038ce0 <[maestro3]m3_pci_driver+0/1f>
Trace; c7033000 <[maestro3]__module_kernel_version+0/1a>
Trace; c7036b4a <[maestro3]m3_init_module+2a/64>
Trace; c7038ce0 <[maestro3]m3_pci_driver+0/1f>
Trace; c01157fd <sys_init_module+4f5/598>
Trace; c7031000 <[ac97_codec].data.end+11dd/123d>
Trace; c7033060 <[maestro3]ld2+0/20>
Trace; c0108d5f <system_call+33/38>
Code; c7036951 <[maestro3]m3_probe+3b1/498>
00000000 <_EIP>:
Code; c7036951 <[maestro3]m3_probe+3b1/498> <=====
0: 89 7b 0c mov %edi,0xc(%ebx) <=====
Code; c7036954 <[maestro3]m3_probe+3b4/498>
3: 57 push %edi
Code; c7036955 <[maestro3]m3_probe+3b5/498>
4: e8 22 fc ff ff call fffffc2b <_EIP+0xfffffc2b> c703657c
<[maestro3]m3_enable_ints+0/24>
Code; c703695a <[maestro3]m3_probe+3ba/498>
9: 57 push %edi
Code; c703695b <[maestro3]m3_probe+3bb/498>
a: e8 20 c9 ff ff call ffffc92f <_EIP+0xffffc92f> c7033280
<[maestro3]m3_assp_continue+0/20>
Code; c7036960 <[maestro3]m3_probe+3c0/498>
f: 8b 44 24 28 mov 0x28(%esp,1),%eax
Code; c7036964 <[maestro3]m3_probe+3c4/498>
13: 50 push %eax
9 warnings and 1 error issued. Results may not be reliable.
Looking at m3_probe:
static int __init m3_probe(struct pci_dev *pci_dev, const struct pci_device_id *
{
<snip>
struct pm_dev *pmdev;
<snip>
pmdev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), m3_pm_callback);
if( pmdev == NULL) {
printk(KERN_WARNING PFX "couldn't register pm callback, suspend/resume m
ight not work.\n");
/* XXX do error stuff :) */
}
pmdev->data = card;
m3_enable_ints(card);
m3_assp_continue(card);
<snip>
}
D'oh, looks like if power management is disabled, pmdev is NULL (I get
that message when I load the module), but we try to derefence it anyways.
The fix is obvious:
pmdev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), m3_pm_callback);
if (pmdev)
pmdev->data = card;
else {
printk(KERN_WARNING PFX "couldn't register pm callback, suspend/resume m
ight not work.\n");
/* XXX do error stuff :) */
}
m3_enable_ints(card);
m3_assp_continue(card);
Patch is also attached.
--
"... being a Linux user is sort of like living in a house inhabited
by a large family of carpenters and architects. Every morning when
you wake up, the house is a little different. Maybe there is a new
turret, or some walls have moved. Or perhaps someone has temporarily
removed the floor under your bed." - Unix for Dummies, 2nd Edition
-- found in the .sig of Rob Riggs, [EMAIL PROTECTED]
diff -urN linux.old/drivers/sound/maestro3.c linux/drivers/sound/maestro3.c
--- linux.old/drivers/sound/maestro3.c Tue Jan 16 11:23:31 2001
+++ linux/drivers/sound/maestro3.c Tue Jan 16 11:15:58 2001
@@ -2692,12 +2692,13 @@
pmdev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), m3_pm_callback);
- if ( pmdev == NULL) {
+ if (pmdev)
+ pmdev->data = card;
+ else {
printk(KERN_WARNING PFX "couldn't register pm callback, suspend/resume might
not work.\n");
/* XXX do error stuff :) */
}
- pmdev->data = card;
m3_enable_ints(card);
m3_assp_continue(card);
