On 11/16/20 5:25 PM, matthew.gerl...@linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerl...@linux.intel.com>
>
> In preparation of looking for dfls based on a vendor
> specific pcie capability, move code that assumes
> Bar0/offset0 as start of DFL to its own function.
>
> Signed-off-by: Matthew Gerlach <matthew.gerl...@linux.intel.com>
> ---
> drivers/fpga/dfl-pci.c | 86 ++++++++++++++++++++++++------------------
> 1 file changed, 49 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
> index a2203d03c9e2..b1b157b41942 100644
> --- a/drivers/fpga/dfl-pci.c
> +++ b/drivers/fpga/dfl-pci.c
> @@ -119,49 +119,20 @@ static int *cci_pci_create_irq_table(struct pci_dev
> *pcidev, unsigned int nvec)
> return table;
> }
>
> -/* enumerate feature devices under pci device */
> -static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> +static int find_dfl_in_bar0(struct pci_dev *pcidev,
> + struct dfl_fpga_enum_info *info)
> {
> - struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
> - int port_num, bar, i, nvec, ret = 0;
> - struct dfl_fpga_enum_info *info;
> - struct dfl_fpga_cdev *cdev;
> resource_size_t start, len;
> + int port_num, bar, i;
> void __iomem *base;
> - int *irq_table;
> + int ret = 0;
> u32 offset;
> u64 v;
>
> - /* allocate enumeration info via pci_dev */
> - info = dfl_fpga_enum_info_alloc(&pcidev->dev);
> - if (!info)
> - return -ENOMEM;
> -
> - /* add irq info for enumeration if the device support irq */
> - nvec = cci_pci_alloc_irq(pcidev);
> - if (nvec < 0) {
> - dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
> - ret = nvec;
> - goto enum_info_free_exit;
> - } else if (nvec) {
> - irq_table = cci_pci_create_irq_table(pcidev, nvec);
> - if (!irq_table) {
> - ret = -ENOMEM;
> - goto irq_free_exit;
> - }
> -
> - ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
> - kfree(irq_table);
> - if (ret)
> - goto irq_free_exit;
> - }
> -
> - /* start to find Device Feature List in Bar 0 */
> + /* start to find Device Feature List from Bar 0 */
> base = cci_pci_ioremap_bar0(pcidev);
> - if (!base) {
> - ret = -ENOMEM;
> - goto irq_free_exit;
> - }
> + if (!base)
> + return -ENOMEM;
>
> /*
> * PF device has FME and Ports/AFUs, and VF device only has one
> @@ -208,12 +179,53 @@ static int cci_enumerate_feature_devs(struct pci_dev
> *pcidev)
> dfl_fpga_enum_info_add_dfl(info, start, len);
> } else {
> ret = -ENODEV;
> - goto irq_free_exit;
> }
>
> /* release I/O mappings for next step enumeration */
> pcim_iounmap_regions(pcidev, BIT(0));
This ws was already commented on.
>
> +
> + return ret;
> +}
> +
> +/* enumerate feature devices under pci device */
> +static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> +{
> + struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
> + struct dfl_fpga_enum_info *info;
> + struct dfl_fpga_cdev *cdev;
> + int nvec, ret = 0;
> + int *irq_table;
> +
> + /* allocate enumeration info via pci_dev */
> + info = dfl_fpga_enum_info_alloc(&pcidev->dev);
> + if (!info)
> + return -ENOMEM;
> +
> + /* add irq info for enumeration if the device support irq */
> + nvec = cci_pci_alloc_irq(pcidev);
> + if (nvec < 0) {
> + dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
> + ret = nvec;
> + goto enum_info_free_exit;
> + } else if (nvec) {
> + irq_table = cci_pci_create_irq_table(pcidev, nvec);
> + if (!irq_table) {
> + ret = -ENOMEM;
> + goto irq_free_exit;
> + }
> +
> + ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
> + kfree(irq_table);
> + if (ret)
> + goto irq_free_exit;
> + }
> +
> + ret = find_dfl_in_bar0(pcidev, info);
> +
> + if (ret)
> + goto irq_free_exit;
> +
> /* start enumeration with prepared enumeration information */
> cdev = dfl_fpga_feature_devs_enumerate(info);
> if (IS_ERR(cdev)) {
This looks fine.
Reviewed-by: Tom Rix <t...@redhat.com>
