The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores.
No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/exynos3250-artik5.dtsi | 2 +- arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++---- arch/arm/boot/dts/exynos3250-rinato.dts | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 12887b3924af..04290ec4583a 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -76,7 +76,7 @@ &i2c_0 { samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index c1a68e612037..69451566945d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -34,10 +34,10 @@ firmware@205f000 { reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 { #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -197,7 +197,7 @@ &i2c_0 { samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index b55afaaa691e..a26e3e582a7e 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -38,10 +38,10 @@ firmware@205f000 { reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 { #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -267,7 +267,7 @@ &i2c_0 { samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; -- 2.25.1
