I think the following lines are suitable for other bridges besides
nvidia's, :) :
===================
+ if (pci_enable_msi_ht_cap(dev) != 0) {
+ return 0;
+ } else {
+ /* Get upstream bridge device handle */
+
+ bridge_dev = dev->bus->self;
+ while(bridge_dev != 0) {
+ if (pci_enable_msi_ht_cap(bridge_dev) !=
0) {
+ return 0;
+ } else
+ bridge_dev =
bridge_dev->bus->self;
+ }
+
+ return 1;
+ }
BRs
Peer Chen
-----Original Message-----
From: Robert Hancock [mailto:[EMAIL PROTECTED]
Sent: Monday, November 26, 2007 2:34 AM
To: peerchen
Cc: linux-kernel; akpm; Peer Chen; Andy Currid
Subject: Re: [PATCH 1/2] msi: set 'En' bit of MSI Mapping Capability on
HT platform
peerchen wrote:
> According to the HyperTransport spec, 'En' indicate if the MSI Mapping
is active. So it should be set when enable the MSI.
>
> The patch base on kernel 2.6.24-rc3
>
> Signed-off-by: Andy Currid <[EMAIL PROTECTED]>
> Signed-off-by: Peer Chen <[EMAIL PROTECTED]>
Isn't there a way we can make this work for any upstream HT bridge,
rather than only for specific NVIDIA chipsets?
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [EMAIL PROTECTED] Home Page:
http://www.roberthancock.com/
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
