On Wed, Sep 30, 2020 at 09:11:34PM -0500, Samuel Holland wrote:
> When using the I2S, LEFT_J, or RIGHT_J format, the hardware supports
> independent BCLK and LRCK inversion control. When using DSP_A or DSP_B,
> LRCK inversion is not supported. The register bit is repurposed to
> select between DSP_A and DSP_B. Extend the driver to support this.
>
> Signed-off-by: Samuel Holland <sam...@sholland.org>
> ---
> sound/soc/sunxi/sun8i-codec.c | 57 +++++++++++++++++++++++------------
> 1 file changed, 37 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
> index 0b713b2a2028..506420fb355c 100644
> --- a/sound/soc/sunxi/sun8i-codec.c
> +++ b/sound/soc/sunxi/sun8i-codec.c
> @@ -39,18 +39,17 @@
> #define SUN8I_MOD_RST_CTL_AIF1 15
> #define SUN8I_MOD_RST_CTL_ADC 3
> #define SUN8I_MOD_RST_CTL_DAC 2
> #define SUN8I_SYS_SR_CTRL 0x018
> #define SUN8I_SYS_SR_CTRL_AIF1_FS 12
> #define SUN8I_SYS_SR_CTRL_AIF2_FS 8
> #define SUN8I_AIF1CLK_CTRL 0x040
> #define SUN8I_AIF1CLK_CTRL_AIF1_MSTR_MOD 15
> -#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV 14
> -#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_INV 13
> +#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV 13
> #define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV 9
> #define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV 6
> #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ 4
> #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_16 (1 << 4)
> #define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT 2
> #define SUN8I_AIF1_ADCDAT_CTRL 0x044
> #define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0L_ENA 15
> #define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0R_ENA 14
> @@ -85,16 +84,17 @@
> #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF1DA1R 10
> #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF2DACR 9
> #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_ADCR 8
>
> #define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_MASK GENMASK(9, 8)
> #define SUN8I_SYSCLK_CTL_AIF2CLK_SRC_MASK GENMASK(5, 4)
> #define SUN8I_SYS_SR_CTRL_AIF1_FS_MASK GENMASK(15, 12)
> #define SUN8I_SYS_SR_CTRL_AIF2_FS_MASK GENMASK(11, 8)
> +#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV_MASK GENMASK(14, 13)
> #define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK GENMASK(12, 9)
> #define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK GENMASK(8, 6)
> #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK GENMASK(5, 4)
> #define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK GENMASK(3, 2)
>
> enum {
> AIF1,
> NAIFS
> @@ -168,17 +168,17 @@ static int sun8i_codec_get_hw_rate(struct
> snd_pcm_hw_params *params)
> default:
> return -EINVAL;
> }
> }
>
> static int sun8i_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> {
> struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
> - u32 format, value;
> + u32 format, invert, value;
>
> /* clock masters */
> switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> case SND_SOC_DAIFMT_CBS_CFS: /* Codec slave, DAI master */
> value = 0x1;
> break;
> case SND_SOC_DAIFMT_CBM_CFM: /* Codec Master, DAI slave */
> value = 0x0;
> @@ -197,55 +197,72 @@ static int sun8i_codec_set_fmt(struct snd_soc_dai *dai,
> unsigned int fmt)
> break;
> case SND_SOC_DAIFMT_LEFT_J:
> format = 0x1;
> break;
> case SND_SOC_DAIFMT_RIGHT_J:
> format = 0x2;
> break;
> case SND_SOC_DAIFMT_DSP_A:
> + format = 0x3;
> + invert = 0x0; /* Set LRCK_INV to 0 */
> + break;
> case SND_SOC_DAIFMT_DSP_B:
> format = 0x3;
> + invert = 0x1; /* Set LRCK_INV to 1 */
> break;
> default:
> return -EINVAL;
> }
> regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
> SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK,
> format << SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT);
>
> /* clock inversion */
> switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> case SND_SOC_DAIFMT_NB_NF: /* Normal */
> value = 0x0;
> break;
> - case SND_SOC_DAIFMT_IB_IF: /* Inversion */
> + case SND_SOC_DAIFMT_NB_IF: /* Inverted LRCK */
> value = 0x1;
> break;
> + case SND_SOC_DAIFMT_IB_NF: /* Inverted BCLK */
> + value = 0x2;
> + break;
> + case SND_SOC_DAIFMT_IB_IF: /* Both inverted */
> + value = 0x3;
> + break;
> default:
> return -EINVAL;
> }
> - regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
> - BIT(SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV),
> - value << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV);
>
> - /*
> - * It appears that the DAI and the codec in the A33 SoC don't
> - * share the same polarity for the LRCK signal when they mean
> - * 'normal' and 'inverted' in the datasheet.
> - *
> - * Since the DAI here is our regular i2s driver that have been
> - * tested with way more codecs than just this one, it means
> - * that the codec probably gets it backward, and we have to
> - * invert the value here.
> - */
> - value ^= scodec->quirks->lrck_inversion;
> + if (format == 0x3) {Could we use a define here? That would be more readable > + /* Inverted LRCK is not available in DSP mode. */ > + if (value & BIT(0)) > + return -EINVAL; And same thing here, explicitly testing both for DSP_A and DSP_B would be more readable. (And I guess value isn't such a great variable name anymore either) Maxime
signature.asc
Description: PGP signature
