This commit adds the following Telit FT980-KS composition:
0x1054: rndis, diag, adb, nmea, modem, modem, aux
AT commands can be sent to /dev/ttyUSB5.
Signed-off-by: Leonid Bloch <lb.work...@gmail.com>
---
The full composition is not tested, and it is the default one according
to Telit support. What is tested, is that this commit makes
/dev/ttyUSB{1..7} appear upon connection of the FT980-KS, and allows
sending AT commands to /dev/ttyUSB5.
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0c6f160a214a..e7a98435ac29 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -301,6 +301,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_LE920A4_1212 0x1212
#define TELIT_PRODUCT_LE920A4_1213 0x1213
#define TELIT_PRODUCT_LE920A4_1214 0x1214
+#define TELIT_PRODUCT_FT980_KS 0x1054
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
@@ -1164,6 +1165,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_FT980_KS) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1031, 0xff), /*
Telit LE910C1-EUX */
.driver_info = NCTRL(0) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff), /*
Telit LE910C1-EUX (ECM) */
--
2.28.0
