Hi Chungeng,
Thank you for the patch!
> From: Chunfeng Yun, Sent: Monday, September 21, 2020 3:13 PM
>
> Use readl_poll_timeout_atomic() to simplify code
>
> Cc: Mathias Nyman <mathias.ny...@linux.intel.com>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
> ---
> v4: changes
> 1. remove unnecessary parentheses suggested by Yoshihiro
> 2. fix the wrong return value suggested by Yoshihiro & Daniel
>
> v2~v3: no changes
> ---
> drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
> 1 file changed, 12 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
> index c1025d3..1bc4fe7 100644
> --- a/drivers/usb/host/xhci-rcar.c
> +++ b/drivers/usb/host/xhci-rcar.c
> @@ -6,6 +6,7 @@
> */
>
> #include <linux/firmware.h>
> +#include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/of.h>
> @@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd
> *hcd)
> void __iomem *regs = hcd->regs;
> struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
> const struct firmware *fw;
> - int retval, index, j, time;
> - int timeout = 10000;
> + int retval, index, j;
> u32 data, val, temp;
> u32 quirks = 0;
> const struct soc_device_attribute *attr;
> @@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd
> *hcd)
> temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
> writel(temp, regs + RCAR_USB3_DL_CTRL);
>
> - for (time = 0; time < timeout; time++) {
> - val = readl(regs + RCAR_USB3_DL_CTRL);
> - if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
> - break;
> - udelay(1);
> - }
> - if (time == timeout) {
> - retval = -ETIMEDOUT;
> + retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
> + val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
> + 1, 10000);
> + if (retval < 0)
> break;
> - }
> }
>
> temp = readl(regs + RCAR_USB3_DL_CTRL);
> temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
> writel(temp, regs + RCAR_USB3_DL_CTRL);
>
> - for (time = 0; time < timeout; time++) {
> - val = readl(regs + RCAR_USB3_DL_CTRL);
> - if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
> - retval = 0;
> - break;
> - }
> - udelay(1);
> - }
> - if (time == timeout)
> - retval = -ETIMEDOUT;
> + retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
We can also remove these unnecessary parentheses like below.
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
After fixed this:
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
