On Sun, Jul 19, 2020 at 11:12:06PM +0530, Amit Singh Tomar wrote:
> This commits adds support for MMC controllers present on Actions S700 SoC,
> there are 3 MMC controllers in this SoC which can be used for accessing
> SD/EMMC/SDIO cards.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
> Signed-off-by: Amit Singh Tomar <amittome...@gmail.com>

Not applying this one as the bindings patch is not merged yet! Please post
it in next revision.

Thanks,
Mani

> ---
> Changes since v6:
>       * No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * Added SoC specific compatibe string.
> Changes since RFC:
>         * No change.
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi 
> b/arch/arm64/boot/dts/actions/s700.dtsi
> index 2c78caebf515..9ed88aafc2da 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -259,5 +259,38 @@
>                       clocks = <&cmu CLK_DMAC>;
>                       power-domains = <&sps S700_PD_DMA>;
>               };
> +
> +             mmc0: mmc@e0210000 {
> +                     compatible = "actions,s700-mmc", "actions,owl-mmc";
> +                     reg = <0x0 0xe0210000 0x0 0x4000>;
> +                     interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cmu CLK_SD0>;
> +                     resets = <&cmu RESET_SD0>;
> +                     dmas = <&dma 2>;
> +                     dma-names = "mmc";
> +                     status = "disabled";
> +             };
> +
> +             mmc1: mmc@e0214000 {
> +                     compatible = "actions,s700-mmc", "actions,owl-mmc";
> +                     reg = <0x0 0xe0214000 0x0 0x4000>;
> +                     interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cmu CLK_SD1>;
> +                     resets = <&cmu RESET_SD1>;
> +                     dmas = <&dma 3>;
> +                     dma-names = "mmc";
> +                     status = "disabled";
> +             };
> +
> +             mmc2: mmc@e0218000 {
> +                     compatible = "actions,s700-mmc", "actions,owl-mmc";
> +                     reg = <0x0 0xe0218000 0x0 0x4000>;
> +                     interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cmu CLK_SD2>;
> +                     resets = <&cmu RESET_SD2>;
> +                     dmas = <&dma 4>;
> +                     dma-names = "mmc";
> +                     status = "disabled";
> +             };
>       };
>  };
> -- 
> 2.7.4
> 

Reply via email to