I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v). I tried downloading the firmware from marvell:
https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38 renaming and to usb8388.bin and putting it in firmware dir. Is this the right firmware?? Upon load this is what I get: 17:58 < mcgrof> usb8xxx: URB in failure status: -71 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd and address 3 17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12 17:58 < mcgrof> usbcore: registered new interface driver usb8xxx I'm using the compatibility package from: http://linuxwireless.org/en/users/Download on 2.6.22. So this driver reflects what's on wireless2.6.git#everything. I tried looking on the wiki but well can't find much information. Can we please start adding some info about this driver to: http://linuxwireless.org/en/users/Drivers/libertas Luis - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
