I have a console - and have booted with
"pci=nomsi" and the behavior is
~the same or even a little worse
in some case (but not by much)...
I will send kernel log & the .config file separately to you...
(quite long)...
Further, you should note that my arch/ppc does NOT have MSI
Capability (CONFIG_PCI_MSI) - thus I think this might be
Is there any debugging I can turn on in the proc or sysfs?
that might give more clues (e.g.: /proc/sys/dev/scsi/logging_level)?
t
-----Original Message-----
From: Mark Lord [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 14, 2007 5:30 PM
To: Morrison, Tom
Cc: Jeff Garzik; [EMAIL PROTECTED]; linux-kernel@vger.kernel.org
Subject: Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
Morrison, Tom wrote:
> I have gotten it to boot from those hard-drives and it
> has the same behavior:
>
> Copying a large file to the same partition (>150MEG)
> causes the system to hang (no I/O - no input/output -
> nothing - complete freeze - like a primary resource
> is locked up or interrupts got completely & totally
> turned off in an ISR and its pending for something?
>
> Only way to get out of this is to power-cycle the box!
..
Okay, a couple of things:
Do this from a text console, not a GUI.
And preferably without ever starting klogd/syslogd during init.
That way you've a much better chance of seeing some kernel diagnostic
messages when it locks up.
Can you boot with "nomsi" kernel parameter?
And I guess we'll need to see the entire kernel .config as well.
This is a tricky one. The driver behaves fine for me
here with a 7042 rev.2 on PCIe in my x86-32 box.
Cheers
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
