From: Camel Guo <cam...@axis.com>
Add setup of bclk-to-ws ratio and sample rate when in master mode,
as well as MCLK input pin setup.
Signed-off-by: Camel Guo <cam...@axis.com>
---
v2:
- Move GPIO setting into devicetree
- Move master config register setting into a new function
sound/soc/codecs/tlv320adcx140.c | 139 ++++++++++++++++++++++++++++++-
sound/soc/codecs/tlv320adcx140.h | 27 ++++++
2 files changed, 162 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 97f16fbba441..685f5fd8b537 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -35,6 +35,7 @@ struct adcx140_priv {
unsigned int dai_fmt;
unsigned int tdm_delay;
unsigned int slot_width;
+ bool master;
};
static const char * const gpo_config_names[] = {
@@ -651,11 +652,136 @@ static int adcx140_reset(struct adcx140_priv *adcx140)
return ret;
}
+static int adcx140_fs_bclk_ratio(unsigned int bclk_ratio)
+{
+ switch (bclk_ratio) {
+ case 16:
+ return ADCX140_RATIO_16;
+ case 24:
+ return ADCX140_RATIO_24;
+ case 32:
+ return ADCX140_RATIO_32;
+ case 48:
+ return ADCX140_RATIO_48;
+ case 64:
+ return ADCX140_RATIO_64;
+ case 96:
+ return ADCX140_RATIO_96;
+ case 128:
+ return ADCX140_RATIO_128;
+ case 192:
+ return ADCX140_RATIO_192;
+ case 256:
+ return ADCX140_RATIO_256;
+ case 384:
+ return ADCX140_RATIO_384;
+ case 512:
+ return ADCX140_RATIO_512;
+ case 1024:
+ return ADCX140_RATIO_1024;
+ case 2048:
+ return ADCX140_RATIO_2048;
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+static int adcx140_fs_rate(unsigned int rate)
+{
+ switch (rate) {
+ case 7350:
+ case 8000:
+ return ADCX140_8_OR_7_35KHZ;
+ case 14700:
+ case 16000:
+ return ADCX140_16_OR_14_7KHZ;
+ case 22050:
+ case 24000:
+ return ADCX140_24_OR_22_05KHZ;
+ case 29400:
+ case 32000:
+ return ADCX140_32_OR_29_4KHZ;
+ case 44100:
+ case 48000:
+ return ADCX140_48_OR_44_1KHZ;
+ case 88200:
+ case 96000:
+ return ADCX140_96_OR_88_2KHZ;
+ case 176400:
+ case 192000:
+ return ADCX140_192_OR_176_4KHZ;
+ case 352800:
+ case 384000:
+ return ADCX140_384_OR_352_8KHZ;
+ case 705600:
+ case 768000:
+ return ADCX140_768_OR_705_6KHZ;
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+static int adcx140_setup_master_config(struct snd_soc_component *component,
+ struct snd_pcm_hw_params *params)
+{
+ int ret = 0;
+ struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+
+ if (adcx140->master) {
+ u8 mst_cfg1 = 0;
+ u8 mst_cfg0 = 0;
+ unsigned int bclk_ratio;
+
+ mst_cfg0 = ADCX140_BCLK_FSYNC_MASTER;
+ if (params_rate(params) % 1000)
+ mst_cfg0 |= ADCX140_FSYNCINV_BIT; /* 44.1 kHz et al */
+
+ ret = adcx140_fs_rate(params_rate(params));
+ if (ret < 0) {
+ dev_err(adcx140->dev, "%s: Unsupported rate %d\n",
+ __func__, params_rate(params));
+ return ret;
+ }
+ mst_cfg1 |= ret;
+
+ /* In slave mode when using automatic clock configuration,
+ * the codec figures out the BCLK to FSYNC ratio itself. But
+ * here in master mode, we need to tell it.
+ */
+
+ bclk_ratio = snd_soc_params_to_frame_size(params);
+ ret = adcx140_fs_bclk_ratio(bclk_ratio);
+ if (ret < 0) {
+ dev_err(adcx140->dev, "%s: Unsupported bclk_ratio %d\n",
+ __func__, bclk_ratio);
+ return ret;
+ }
+ mst_cfg1 |= ret;
+
+ snd_soc_component_update_bits(component, ADCX140_MST_CFG1,
+ ADCX140_FS_RATE_MSK |
+ ADCX140_RATIO_MSK,
+ mst_cfg1);
+
+ snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
+ ADCX140_FSYNCINV_BIT |
+ ADCX140_BCLK_FSYNC_MASTER,
+ mst_cfg0);
+
+ }
+
+ return ret;
+}
+
+
static int adcx140_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
+ int ret = 0;
u8 data = 0;
switch (params_width(params)) {
@@ -677,6 +803,13 @@ static int adcx140_hw_params(struct snd_pcm_substream
*substream,
return -EINVAL;
}
+ ret = adcx140_setup_master_config(component, params);
+ if (ret < 0) {
+ dev_err(component->dev, "%s: Failed to set up master config\n",
+ __func__);
+ return ret;
+ }
+
snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
ADCX140_WORD_LEN_MSK, data);
@@ -689,16 +822,16 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai
*codec_dai,
struct snd_soc_component *component = codec_dai->component;
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
u8 iface_reg1 = 0;
- u8 iface_reg2 = 0;
int offset = 0;
int width = adcx140->slot_width;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
- iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
+ adcx140->master = true;
break;
case SND_SOC_DAIFMT_CBS_CFS:
+ adcx140->master = false;
break;
case SND_SOC_DAIFMT_CBS_CFM:
case SND_SOC_DAIFMT_CBM_CFS:
@@ -751,8 +884,6 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai
*codec_dai,
ADCX140_BCLKINV_BIT |
ADCX140_ASI_FORMAT_MSK,
iface_reg1);
- snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
- ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
/* Configure data offset */
snd_soc_component_update_bits(component, ADCX140_ASI_CFG1,
diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h
index 96f067e65e2a..1fbb7fa3c73d 100644
--- a/sound/soc/codecs/tlv320adcx140.h
+++ b/sound/soc/codecs/tlv320adcx140.h
@@ -149,4 +149,31 @@
#define ADCX140_GPIO_CFG_MAX 15
#define ADCX140_GPIO_DRV_MAX 5
+/* MST_CFG1 */
+#define ADCX140_8_OR_7_35KHZ (0 << 4)
+#define ADCX140_16_OR_14_7KHZ (1 << 4)
+#define ADCX140_24_OR_22_05KHZ (2 << 4)
+#define ADCX140_32_OR_29_4KHZ (3 << 4)
+#define ADCX140_48_OR_44_1KHZ (4 << 4)
+#define ADCX140_96_OR_88_2KHZ (5 << 4)
+#define ADCX140_192_OR_176_4KHZ (6 << 4)
+#define ADCX140_384_OR_352_8KHZ (7 << 4)
+#define ADCX140_768_OR_705_6KHZ (8 << 4)
+#define ADCX140_FS_RATE_MSK GENMASK(7, 4)
+
+#define ADCX140_RATIO_16 0
+#define ADCX140_RATIO_24 1
+#define ADCX140_RATIO_32 2
+#define ADCX140_RATIO_48 3
+#define ADCX140_RATIO_64 4
+#define ADCX140_RATIO_96 5
+#define ADCX140_RATIO_128 6
+#define ADCX140_RATIO_192 7
+#define ADCX140_RATIO_256 8
+#define ADCX140_RATIO_384 9
+#define ADCX140_RATIO_512 10
+#define ADCX140_RATIO_1024 11
+#define ADCX140_RATIO_2048 12
+#define ADCX140_RATIO_MSK GENMASK(3, 0)
+
#endif /* _TLV320ADCX140_ */
--
2.20.1
