dtschema expects DMA channels in specific order (tx, rx and tx-sec).
The order actually should not matter because dma-names is used however
let's make it aligned with dtschema to suppress warnings like:
i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the
given schemas
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 96e667ba1c3f..72fb9d9f7ba3 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -240,8 +240,8 @@
reg = <0xeee30000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ dma-names = "tx", "rx", "tx-sec";
+ dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
clock-names = "iis",
"i2s_opclk0",
"i2s_opclk1";
@@ -260,8 +260,8 @@
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <17>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 12>, <&pdma1 13>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 13>, <&pdma1 12>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
pinctrl-names = "default";
@@ -275,8 +275,8 @@
reg = <0xe2a00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <18>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 14>, <&pdma1 15>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 15>, <&pdma1 14>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
pinctrl-names = "default";
--
2.17.1
