Some devices driver call libusb_clear_halt when target ep queue
is not empty. (eg. spice client connected to qemu for usb redir)
Before commit f5249461b504 ("xhci: Clear the host side toggle
manually when endpoint is soft reset"), that works well.
But now, we got the error log:
EP not empty, refuse reset
xhch_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE
bit is still on
So all the subsequent urb sumbit to the ep will fail with the
warn log:
Can't enqueue URB while manually clearing toggle
We need restore ep_state EP_SOFT_CLEAR_TOGGLE bit after
xhci_endpoint_reset, even if it is failed.
Signed-off-by: Ding Hui <ding...@sangfor.com.cn>
---
drivers/usb/host/xhci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3c41b14ecce7..e9884ae9c77d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3236,10 +3236,11 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
wait_for_completion(cfg_cmd->completion);
- ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
xhci_free_command(xhci, cfg_cmd);
cleanup:
xhci_free_command(xhci, stop_cmd);
+ if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
+ ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
}
static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
--
2.17.1
