Set I2C bus 7 to multi-master mode and add the panel device that will
register as a slave.
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index b94421f6cbd5..f121f3c26a3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -698,6 +698,7 @@ eeprom@53 {
};
&i2c7 {
+ multi-master;
status = "okay";
si7021-a20@20 {
@@ -831,6 +832,11 @@ gpio@15 {
};
};
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */
+ };
+
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
--
2.26.2
