Richard, I think we're experiencing the same issue. Could you fire up minicom (under 2.4) , connect to another box, and do a directory listing to see if you have the same lost characters/"flow control" looking issue I'm experiencing... It's rock solid on 2.2.18. peace Mike At 04:23 PM 1/10/01 -0500, you wrote: >I get the subject message when trying to initiate a PPP connection over >an internal USR 56k/flex modem defined as /dev/ttyS0. > >It happens with both diald and chat(from PPP). > >The "LSR safety check engaged!\n" message then causes this (diald): >diald[407]: failed to get initial modem terminal attributes: Input/output >error >diald[407]: could not get initial terminal attributes: Input/output error >diald[407]: failed to set terminal attributes: Input/output error >chat[803]: Can't get terminal parameters: Input/output error > >The serial support at boot is: >Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT >SHARE_IRQ SERIAL_PCI enabled >ttyS00 at 0x03f8 (irq = 4) is a 16550A >ttyS01 at 0x02f8 (irq = 3) is a 16550A > >Any clues ? This is keeping me at 2.2.19prex for the nonce. > >Thanks, >-- >Rick Nelson >Life'll kill ya -- Warren Zevon >Then you'll be dead -- Life'll kill ya > >- >To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >the body of a message to [EMAIL PROTECTED] >Please read the FAQ at http://www.tux.org/lkml/ -=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=- Mike Lieman -- CIO [EMAIL PROTECTED] The Barry Scott Companies (518) 452-8560 ext. 114 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
