When using eMMC as the boot device, some Micron eMMC devices will
cause reboot to hang. This is a result of the eMMC device not going
into boot mode after the hardware sends CMD0 to reset the eMMC
device. This only happens if the kernel driver sends CMD5 (SLEEP_WAKE),
to put the device into sleep state, before restarting the system.
The fix is to add a quirk that avoids sending the SLEEP command
and to use MMC_FIXUP to set the quirk for these Micron devices.
Signed-off-by: Al Cooper <alcoop...@gmail.com>
---
drivers/mmc/core/mmc.c | 3 ++-
drivers/mmc/core/quirks.h | 8 ++++++++
include/linux/mmc/card.h | 1 +
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 4203303f946a..4d69e8f8fe59 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1895,7 +1895,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
static int mmc_can_sleep(struct mmc_card *card)
{
- return (card && card->ext_csd.rev >= 3);
+ return card && card->ext_csd.rev >= 3 &&
+ ((card->quirks & MMC_QUIRK_BROKEN_SLEEP) == 0);
}
static int mmc_sleep(struct mmc_host *host)
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index 472fa2fdcf13..7263187b6323 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -99,6 +99,14 @@ static const struct mmc_fixup mmc_blk_fixups[] = {
MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
MMC_QUIRK_TRIM_BROKEN),
+ /*
+ * Some Micron eMMC devices will not go into boot mode on
+ * CMD0 arg: 0XF0F0F0F0 after going into SLEEP state.
+ * This will hang a reboot.
+ */
+ MMC_FIXUP(CID_NAME_ANY, CID_MANFID_NUMONYX, 0x014e, add_quirk_mmc,
+ MMC_QUIRK_BROKEN_SLEEP),
+
END_FIXUP
};
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 7d46411ffaa2..0cdddcb5e17d 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -270,6 +270,7 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx could
create a fake interrupt */
#define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
+#define MMC_QUIRK_BROKEN_SLEEP (1<<14) /* Broken sleep mode */
bool reenable_cmdq; /* Re-enable Command Queue */
--
2.17.1
