Richard Purdie wrote: > On Sun, 2007-10-21 at 14:55 +0200, Németh Márton wrote: >> diff -uprN linux-2.6.23.orig/drivers/leds/Kconfig >> linux-2.6.23/drivers/leds/Kconfig >> --- linux-2.6.23.orig/drivers/leds/Kconfig 2007-10-09 22:31:38.000000000 >> +0200 >> +++ linux-2.6.23/drivers/leds/Kconfig 2007-10-21 12:04:50.000000000 >> +0200 >> @@ -101,6 +101,39 @@ config LEDS_GPIO >> outputs. To be useful the particular board must have LEDs >> and they must be connected to the GPIO lines. >> >> +config LEDS_CLEVO_MAIL >> + tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" >> + depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL >> + help >> + This driver makes the mail LED accessible from userspace >> + programs through the leds subsystem. This LED have three >> + known mode: off, blink at 0.5Hz and blink at 1Hz. >> + >> + The driver supports two kinds of interface: using ledtrig-timer >> + or through /sys/class/leds/clevo::mail/brightness. As this LED >> + cannot change it's brightness it blinks instead. The brightness >> + value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means >> + blink at 1Hz. > > Hmm, there really is no way to just turn the LED on? :(
I looked up the printed manual (which can be also found at ftp://ftp.clevo.com.tw/USRMANUAL/D4x0J/D4x0J_CUG.zip ), page 9 contains the following information: LED Power & Communication Indicators: Icon | Color | Description -----+------------------+----------------------------------------------- Mail | Blinking Green & | New mail has arrived LED | Orange | +------------------+----------------------------------------------- | Fast Blinking | New mail has arrived from users defined | Green & Orange | in the Special Group in the Auto Mail Checker +------------------+----------------------------------------------- | Green | The (optional) Wireless LAN module is On +------------------+----------------------------------------------- | Orange | The (optional) Bluetooth module is On +------------------+----------------------------------------------- | Half Orange/ | Both the (optional) Wireless LAN and Bluetooth | Half Green | modules are On (see sidebar) -----+------------------+----------------------------------------------- Unfortunately I do not have these optional modules so I never saw the LED just on without blinking. I don't know if there is any hardware limitation turning on the LED without the optional modules. I will send a new patch collection which addresses the other mentioned topics. Márton Németh - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
