From: Andy Shevchenko <andriy.shevche...@linux.intel.com>

[ Upstream commit 0b22c25e1b81c5f718e89c4d759e6a359be24417 ]

The commit 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
seems inadvertently made a typo in pca953x_irq_bus_sync_unlock().

When the direction bit is 1 it means input, and the piece of code in question
was looking for output ones that should be turned to inputs.

Fix direction setting when configure an IRQ by injecting a bitmap complement
operation.

Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Depends-on: 35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Cc: Marek Vasut <marek.va...@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 8571e54512476..a10411958e3f2 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -686,8 +686,6 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
        DECLARE_BITMAP(reg_direction, MAX_LINE);
        int level;
 
-       pca953x_read_regs(chip, chip->regs->direction, reg_direction);
-
        if (chip->driver_data & PCA_PCAL) {
                /* Enable latch on interrupt-enabled inputs */
                pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
@@ -698,7 +696,11 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
                pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
        }
 
+       /* Switch direction to input if needed */
+       pca953x_read_regs(chip, chip->regs->direction, reg_direction);
+
        bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, 
gc->ngpio);
+       bitmap_complement(reg_direction, reg_direction, gc->ngpio);
        bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
 
        /* Look for any newly setup interrupt */
-- 
2.25.1



Reply via email to