On 12/7/2020 12:44 pm, Chris Ruehl wrote:
Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
Signed-off-by: Chris Ruehl <chris.ru...@gtsys.com.hk>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Received new PCBA from the factory today, with the chip installed.
Probe working, the measurement of temperature and humidity is correct.
root@pcba0:~# cat
/sys/devices/platform/ff110000.i2c/i2c-1/1-0070/hwmon/hwmon1/temp1_input
42334
root@pcba0:~# cat
/sys/devices/platform/ff110000.i2c/i2c-1/1-0070/hwmon/hwmon1/humidity1_input
38128
Tested-by: Chris Ruehl <chris.ru...@gtsys.com.hk>
---
drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
index a0078ccede03..7993a5ff8768 100644
--- a/drivers/hwmon/shtc1.c
+++ b/drivers/hwmon/shtc1.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/platform_data/shtc1.h>
+#include <linux/of.h>
/* commands (high precision mode) */
static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2
};
@@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
enum shtcx_chips chip = id->driver_data;
struct i2c_adapter *adap = client->adapter;
struct device *dev = &client->dev;
+ struct device_node *np = dev->of_node;
if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
dev_err(dev, "plain i2c transactions not supported\n");
@@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client,
data->client = client;
data->chip = chip;
- if (client->dev.platform_data)
- data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+ if (np) {
+ data->setup.blocking_io = of_property_read_bool(np,
"sensirion,blocking-io");
+ data->setup.high_precision = !of_property_read_bool(np,
"sensicon,low-precision");
+ } else {
+ if (client->dev.platform_data)
+ data->setup = *(struct shtc1_platform_data
*)dev->platform_data;
+ }
+
shtc1_select_command(data);
mutex_init(&data->update_lock);
@@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = {
};
MODULE_DEVICE_TABLE(i2c, shtc1_id);
+static const struct of_device_id shtc1_of_match[] = {
+ { .compatible = "sensirion,shtc1" },
+ { .compatible = "sensirion,shtw1" },
+ { .compatible = "sensirion,shtc3" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, shtc1_of_match);
+
static struct i2c_driver shtc1_i2c_driver = {
- .driver.name = "shtc1",
+ .driver = {
+ .name = "shtc1",
+ .of_match_table = shtc1_of_match,
+ },
.probe = shtc1_probe,
.id_table = shtc1_id,
};
--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521
Disclaimer: https://www.gtsys.com.hk/email/classified.html
