On 7/12/2020 8:30 PM, Chunfeng Yun wrote:
> Use readl_poll_timeout() to poll register status
> 
> Cc: Florian Fainelli <f.faine...@gmail.com>
> Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
> ---
> v2 changes, suggested by Stephen:
>   1. use unsigned int instead of int for @usec parameter
>   2. add dev_log() back
>   3. drop "Err" in error log
> ---
>  drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
>  1 file changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c 
> b/drivers/usb/gadget/udc/bdc/bdc_core.c
> index 02a3a77..53dccb1 100644
> --- a/drivers/usb/gadget/udc/bdc/bdc_core.c
> +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
> @@ -12,6 +12,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/platform_device.h>
>  #include <linux/interrupt.h>
> +#include <linux/iopoll.h>
>  #include <linux/ioport.h>
>  #include <linux/io.h>
>  #include <linux/list.h>
> @@ -29,24 +30,19 @@
>  #include "bdc_dbg.h"
>  
>  /* Poll till controller status is not OIP */
> -static int poll_oip(struct bdc *bdc, int usec)
> +static int poll_oip(struct bdc *bdc, u32 usec)
>  {
>       u32 status;
> -     /* Poll till STS!= OIP */
> -     while (usec) {
> -             status = bdc_readl(bdc->regs, BDC_BDCSC);
> -             if (BDC_CSTS(status) != BDC_OIP) {
> -                     dev_dbg(bdc->dev,
> -                             "poll_oip complete status=%d",
> -                             BDC_CSTS(status));
> -                     return 0;
> -             }
> -             udelay(10);
> -             usec -= 10;
> -     }
> -     dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
> +     int ret;
>  
> -     return -ETIMEDOUT;
> +     ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
> +             (BDC_CSTS(status) != BDC_OIP), 10, usec);

You could probably indent this to the opening parenthesis, but with or
without it:

Reviewed-by: Florian Fainelli <f.faine...@gmail.com>

and thanks for picking up the MAINTAINERS file update ;)

> +     if (ret)
> +             dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
> +     else
> +             dev_dbg(bdc->dev, "%s complete status=%d", __func__, 
> BDC_CSTS(status));
> +
> +     return ret;
>  }
>  
>  /* Stop the BDC controller */
> 

-- 
Florian

Reply via email to