Hi,
On Fri, Jul 03, 2020 at 09:48:41PM +0200, Ondrej Jirman wrote:
> Revision 1.2 should be the final production version of the PinePhone.
> It has most of the known HW quirks fixed.
>
> Interrupt to the magnetometer is routed correctly, in this revision.
>
> The bulk of the changes are in how modem and the USB-C HDMI bridge
> chip is powered and where the signals from the modem are connected.
>
> Also backlight intensity seemingly behaves differently, than on the
> 1.1 and 1.0 boards, and the PWM duty cycle where backlight starts
> to work is 10% (as tested on 2 1.2 PinePhones I have access to).
>
> Signed-off-by: Ondrej Jirman <meg...@megous.com>
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../allwinner/sun50i-a64-pinephone-1.2.dts | 40 +++++++++++++++++++
> .../dts/allwinner/sun50i-a64-pinephone.dtsi | 2 +-
> 3 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile
> b/arch/arm64/boot/dts/allwinner/Makefile
> index e4d3cd0ac5bb..916d10d5b87c 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb
> sun50i-a64-pine64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> new file mode 100644
> index 000000000000..a9f5b670c9b8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2020 Ondrej Jirman <meg...@megous.com>
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64-pinephone.dtsi"
> +
> +/ {
> + model = "Pine64 PinePhone (1.2)";
> + compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
> +};
> +
> +&backlight {
> + power-supply = <®_ldo_io0>;
> + /*
> + * PWM backlight circuit on this PinePhone revision was changed since
> 1.0,
> + * and the lowest PWM duty cycle that doesn't lead to backlight being
> off
> + * is around 10%. Duty cycle for the lowest brightness level also
> varries
> + * quite a bit between individual boards, so the lowest value here was
> + * chosen as a safe default.
> + */
> + brightness-levels = <
> + 5000 5248 5506 5858 6345
> + 6987 7805 8823 10062 11543
> + 13287 15317 17654 20319 23336
> + 26724 30505 34702 39335 44427
> + 50000
> + >;
> + num-interpolated-steps = <50>;
> + default-brightness-level = <500>;
> +};
> +
> +&lis3mdl {
> + /*
> + * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
> + * enable interrupts.
> + */
> + interrupt-parent = <&pio>;
> + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> index a3b400ff972b..904122711a89 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> @@ -142,7 +142,7 @@ &i2c1 {
> status = "okay";
>
> /* Magnetometer */
> - lis3mdl@1e {
> + lis3mdl: lis3mdl@1e {I just applied all three patches, but the node name here is wrong and should be the class of the device. Can you send a follow-up patch renaming the node name to magnetometer? Thanks! Maxime
signature.asc
Description: PGP signature
