Hi Miquel,

On Thu, Jan 09, 2020 at 07:40:37PM +0100, Miquel Raynal wrote:
> Add support for the Satoz SAT050AT40H12R2 panel.
> 
> Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
> ---
> 
> Changes since v4:
> * None.
> 
> Changes since v3:
> * Added connector type.
> 
> Changes since v2:
> * Dropped two uneeded lines which would fail the build.
> 
> Changes since v1:
> * Switched to display_timing's instead of display_mode.
> 
>  drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c 
> b/drivers/gpu/drm/panel/panel-simple.c
> index aaa08beac13c..1aa6622abc49 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2577,6 +2577,30 @@ static const struct panel_desc samsung_ltn140at29_301 
> = {
>       },
>  };
>  
> +static const struct display_timing satoz_sat050at40h12r2_timing = {
> +     .pixelclock = {33300000, 33300000, 50000000},
> +     .hactive = {800, 800, 800},
> +     .hfront_porch = {16, 210, 354},
> +     .hback_porch = {46, 46, 46},
> +     .hsync_len = {1, 1, 40},
> +     .vactive = {480, 480, 480},
> +     .vfront_porch = {7, 22, 147},
> +     .vback_porch = {23, 23, 23},
> +     .vsync_len = {1, 1, 20},
> +};
> +
> +static const struct panel_desc satoz_sat050at40h12r2 = {
> +     .timings = &satoz_sat050at40h12r2_timing,
> +     .num_timings = 1,
> +     .bpc = 8,
> +     .size = {
> +             .width = 108,
> +             .height = 65,
> +     },
> +     .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +     .connector_type = DRM_MODE_CONNECTOR_LVDS,

I'm trying to fix inconsistencies in the panel-simple driver, and this
caught my eyes. MEDIA_BUS_FMT_RGB888_1X24 isn't a correct format for
LVDS panels. MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG or MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA
should be used instead. As I couldn't find documentation for the panel,
I can't tell which format is correct. Could you please help ?

> +};
> +
>  static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
>       .clock = 168480,
>       .hdisplay = 1920,
> @@ -3377,6 +3401,9 @@ static const struct of_device_id platform_of_match[] = {
>       }, {
>               .compatible = "samsung,ltn140at29-301",
>               .data = &samsung_ltn140at29_301,
> +     }, {
> +             .compatible = "satoz,sat050at40h12r2",
> +             .data = &satoz_sat050at40h12r2,
>       }, {
>               .compatible = "sharp,ld-d5116z01b",
>               .data = &sharp_ld_d5116z01b,

-- 
Regards,

Laurent Pinchart

Reply via email to