crashkernel region could have an overlap with special memory regions
like opal, rtas, tce-table & such. These regions are referred to as
exclude memory ranges. Setup this ranges during image probe in order
to avoid them while finding the buffer for different kdump segments.
Implement kexec_locate_mem_hole_ppc64() that locates a memory hole
accounting for these ranges. Also, override arch_kexec_add_buffer()
to locate a memory hole & later call __kexec_add_buffer() function
with kbuf->mem set to skip the generic locate memory hole lookup.
Signed-off-by: Hari Bathini <hbath...@linux.ibm.com>
---
arch/powerpc/include/asm/crashdump-ppc64.h | 10 +
arch/powerpc/include/asm/kexec.h | 7 -
arch/powerpc/kexec/elf_64.c | 7 +
arch/powerpc/kexec/file_load_64.c | 292 ++++++++++++++++++++++++++++
4 files changed, 312 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/include/asm/crashdump-ppc64.h
diff --git a/arch/powerpc/include/asm/crashdump-ppc64.h
b/arch/powerpc/include/asm/crashdump-ppc64.h
new file mode 100644
index 0000000..3596c25
--- /dev/null
+++ b/arch/powerpc/include/asm/crashdump-ppc64.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H
+#define _ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H
+
+/* min & max addresses for kdump load segments */
+#define KDUMP_BUF_MIN (crashk_res.start)
+#define KDUMP_BUF_MAX ((crashk_res.end < ppc64_rma_size) ? \
+ crashk_res.end : (ppc64_rma_size - 1))
+
+#endif /* __ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 7008ea1..bf47a01 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -100,14 +100,16 @@ void relocate_new_kernel(unsigned long indirection_page,
unsigned long reboot_co
#ifdef CONFIG_KEXEC_FILE
extern const struct kexec_file_ops kexec_elf64_ops;
-#ifdef CONFIG_IMA_KEXEC
#define ARCH_HAS_KIMAGE_ARCH
struct kimage_arch {
+ struct crash_mem *exclude_ranges;
+
+#ifdef CONFIG_IMA_KEXEC
phys_addr_t ima_buffer_addr;
size_t ima_buffer_size;
-};
#endif
+};
int setup_purgatory(struct kimage *image, const void *slave_code,
const void *fdt, unsigned long kernel_load_addr,
@@ -125,6 +127,7 @@ int setup_new_fdt_ppc64(const struct kimage *image, void
*fdt,
unsigned long initrd_load_addr,
unsigned long initrd_len, const char *cmdline);
#endif /* CONFIG_PPC64 */
+
#endif /* CONFIG_KEXEC_FILE */
#else /* !CONFIG_KEXEC_CORE */
diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
index 23ad04c..c695f94 100644
--- a/arch/powerpc/kexec/elf_64.c
+++ b/arch/powerpc/kexec/elf_64.c
@@ -22,6 +22,7 @@
#include <linux/of_fdt.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <asm/crashdump-ppc64.h>
static void *elf64_load(struct kimage *image, char *kernel_buf,
unsigned long kernel_len, char *initrd,
@@ -46,6 +47,12 @@ static void *elf64_load(struct kimage *image, char
*kernel_buf,
if (ret)
goto out;
+ if (image->type == KEXEC_TYPE_CRASH) {
+ /* min & max buffer values for kdump case */
+ kbuf.buf_min = pbuf.buf_min = KDUMP_BUF_MIN;
+ kbuf.buf_max = pbuf.buf_max = KDUMP_BUF_MAX;
+ }
+
ret = kexec_elf_load(image, &ehdr, &elf_info, &kbuf, &kernel_load_addr);
if (ret)
goto out;
diff --git a/arch/powerpc/kexec/file_load_64.c
b/arch/powerpc/kexec/file_load_64.c
index e6bff960..f1d7160 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -17,6 +17,8 @@
#include <linux/kexec.h>
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
+#include <asm/kexec_ranges.h>
+#include <asm/crashdump-ppc64.h>
const struct kexec_file_ops * const kexec_file_loaders[] = {
&kexec_elf64_ops,
@@ -24,6 +26,247 @@ const struct kexec_file_ops * const kexec_file_loaders[] = {
};
/**
+ * get_exclude_memory_ranges - Get exclude memory ranges. This list includes
+ * regions like opal/rtas, tce-table, initrd,
+ * kernel, htab which should be avoided while
+ * setting up kexec load segments.
+ * @mem_ranges: Range list to add the memory ranges to.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int get_exclude_memory_ranges(struct crash_mem **mem_ranges)
+{
+ int ret;
+
+ ret = add_tce_mem_ranges(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_initrd_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_htab_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_kernel_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_rtas_mem_range(mem_ranges, false);
+ if (ret)
+ goto out;
+
+ ret = add_opal_mem_range(mem_ranges, false);
+ if (ret)
+ goto out;
+
+ ret = add_reserved_ranges(mem_ranges);
+ if (ret)
+ goto out;
+
+ /* exclude memory ranges should be sorted for easy lookup */
+ sort_memory_ranges(*mem_ranges);
+out:
+ if (ret)
+ pr_err("Failed to setup exclude memory ranges\n");
+ return ret;
+}
+
+/**
+ * __locate_mem_hole_ppc64 - Tests if the memory hole between buf_min & buf_max
+ * is large enough for the buffer. If true, sets
+ * kbuf->mem to the buffer.
+ * @kbuf: Buffer contents and memory parameters.
+ * @buf_min: Minimum address for the buffer.
+ * @buf_max: Maximum address for the buffer.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int __locate_mem_hole_ppc64(struct kexec_buf *kbuf,
+ u64 buf_min, u64 buf_max)
+{
+ int ret = -EADDRNOTAVAIL;
+
+ buf_min = ALIGN(buf_min, kbuf->buf_align);
+
+ if (buf_min < buf_max &&
+ (buf_max - buf_min + 1) >= kbuf->memsz) {
+ /*
+ * Suitable memory range found. Set kbuf->mem here to skip
+ * locate memory hole routine in __kexec_add_buffer() call.
+ */
+ ret = 0;
+ if (kbuf->top_down)
+ kbuf->mem = ALIGN_DOWN(buf_max - kbuf->memsz + 1,
+ kbuf->buf_align);
+ else
+ kbuf->mem = buf_min;
+ }
+
+ return ret;
+}
+
+/**
+ * locate_mem_hole_top_down_ppc64 - Skip special memory regions to find a
+ * suitable buffer with top down approach.
+ * @kbuf: Buffer contents and memory parameters.
+ * @buf_min: Minimum address for the buffer.
+ * @buf_max: Maximum address for the buffer.
+ * @emem: Exclude memory ranges.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int locate_mem_hole_top_down_ppc64(struct kexec_buf *kbuf,
+ u64 buf_min, u64 buf_max,
+ const struct crash_mem *emem)
+{
+ int i, ret = 0, err = -EADDRNOTAVAIL;
+ u64 start, end, tmin, tmax;
+
+ tmax = buf_max;
+ for (i = (emem->nr_ranges - 1); i >= 0; i--) {
+ start = emem->ranges[i].start;
+ end = emem->ranges[i].end;
+
+ if (start > tmax)
+ continue;
+
+ if (end < tmax) {
+ tmin = (end < buf_min ? buf_min : end + 1);
+ ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
+ if (!ret)
+ return 0;
+ }
+
+ tmax = start - 1;
+
+ if (tmax < buf_min) {
+ ret = err;
+ break;
+ }
+ ret = 0;
+ }
+
+ if (!ret) {
+ tmin = buf_min;
+ ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
+ }
+ return ret;
+}
+
+/**
+ * locate_mem_hole_bottom_up_ppc64 - Skip special memory regions to find a
+ * suitable buffer with bottom up approach.
+ * @kbuf: Buffer contents and memory parameters.
+ * @buf_min: Minimum address for the buffer.
+ * @buf_max: Maximum address for the buffer.
+ * @emem: Exclude memory ranges.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int locate_mem_hole_bottom_up_ppc64(struct kexec_buf *kbuf,
+ u64 buf_min, u64 buf_max,
+ const struct crash_mem *emem)
+{
+ int i, ret = 0, err = -EADDRNOTAVAIL;
+ u64 start, end, tmin, tmax;
+
+ tmin = buf_min;
+ for (i = 0; i < emem->nr_ranges; i++) {
+ start = emem->ranges[i].start;
+ end = emem->ranges[i].end;
+
+ if (end < tmin)
+ continue;
+
+ if (start > tmin) {
+ tmax = (start > buf_max ? buf_max : start - 1);
+ ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
+ if (!ret)
+ return 0;
+ }
+
+ tmin = end + 1;
+
+ if (tmin > buf_max) {
+ ret = err;
+ break;
+ }
+ ret = 0;
+ }
+
+ if (!ret) {
+ tmax = buf_max;
+ ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
+ }
+ return ret;
+}
+
+/**
+ * kexec_locate_mem_hole_ppc64 - Skip special memory regions like rtas,
+ * tce-table, opal, reserved-ranges & such
+ * (exclude memory ranges) as they can't be
+ * used for kexec segment buffer. Use buf_min
+ * & buf_max fields in kexec_buf structure to
+ * skip regions. Sets kbuf->mem when a
+ * suitable memory hole is found.
+ * @kbuf: Buffer contents and memory parameters.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int kexec_locate_mem_hole_ppc64(struct kexec_buf *kbuf)
+{
+ struct crash_mem **emem;
+ u64 buf_min, buf_max;
+ int ret;
+
+ /*
+ * Use the locate_mem_hole logic in kexec_add_buffer() for regular
+ * kexec_file_load syscall
+ */
+ if (kbuf->image->type != KEXEC_TYPE_CRASH)
+ return 0;
+
+ /* Look up the exclude ranges list while locating the memory hole */
+ emem = &(kbuf->image->arch.exclude_ranges);
+ if (!(*emem) || ((*emem)->nr_ranges == 0)) {
+ pr_warn("No exclude range list. Using the default locate mem
hole method\n");
+ return 0;
+ }
+
+ /* Ensure minimum alignment needed for segments. */
+ kbuf->memsz = ALIGN(kbuf->memsz, PAGE_SIZE);
+ kbuf->buf_align = max(kbuf->buf_align, PAGE_SIZE);
+
+ /* Segments for kdump kernel should be within crashkernel region */
+ buf_min = (kbuf->buf_min < crashk_res.start ?
+ crashk_res.start : kbuf->buf_min);
+ buf_max = (kbuf->buf_max > crashk_res.end ?
+ crashk_res.end : kbuf->buf_max);
+
+ if (buf_min > buf_max) {
+ pr_err("Invalid buffer min and/or max values\n");
+ return -EINVAL;
+ }
+
+ if (kbuf->top_down)
+ ret = locate_mem_hole_top_down_ppc64(kbuf, buf_min, buf_max,
+ *emem);
+ else
+ ret = locate_mem_hole_bottom_up_ppc64(kbuf, buf_min, buf_max,
+ *emem);
+
+ /* Add the buffer allocated to the exclude list for the next lookup */
+ if (!ret) {
+ add_mem_range(emem, kbuf->mem, kbuf->memsz);
+ sort_memory_ranges(*emem);
+ }
+ return ret;
+}
+
+/**
* setup_purgatory_ppc64 - initialize PPC64 specific purgatory's global
* variables and call setup_purgatory() to initialize
* common global variable.
@@ -89,6 +332,29 @@ int setup_new_fdt_ppc64(const struct kimage *image, void
*fdt,
}
/**
+ * arch_kexec_add_buffer - Locate memory hole before calling
kexec_add_buffer().
+ * All kexec_add_buffer() callers should use this
+ * function instead.
+ * @kbuf: Buffer contents and memory parameters.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int arch_kexec_add_buffer(struct kexec_buf *kbuf)
+{
+ int ret;
+
+ ret = kexec_locate_mem_hole_ppc64(kbuf);
+ if (ret)
+ goto out;
+
+ ret = __kexec_add_buffer(kbuf);
+out:
+ if (ret)
+ pr_err("Failed to add buffer of size %lu\n", kbuf->memsz);
+ return ret;
+}
+
+/**
* arch_kexec_kernel_image_probe - Does additional handling needed to setup
* kexec segments.
* @image: kexec image being loaded.
@@ -100,9 +366,31 @@ int setup_new_fdt_ppc64(const struct kimage *image, void
*fdt,
int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
unsigned long buf_len)
{
- /* We don't support crash kernels yet. */
- if (image->type == KEXEC_TYPE_CRASH)
+ if (image->type == KEXEC_TYPE_CRASH) {
+ int ret;
+
+ /* Get exclude memory ranges needed for setting up kdump
segments */
+ ret = get_exclude_memory_ranges(&(image->arch.exclude_ranges));
+ if (ret)
+ pr_err("Failed to setup exclude memory ranges for
buffer lookup\n");
+ /* Return this until all changes for panic kernel are in */
return -EOPNOTSUPP;
+ }
return kexec_image_probe_default(image, buf, buf_len);
}
+
+/**
+ * arch_kimage_file_post_load_cleanup - Frees up all the allocations done
+ * while loading the image.
+ * @image: kexec image being loaded.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+ kfree(image->arch.exclude_ranges);
+ image->arch.exclude_ranges = NULL;
+
+ return kexec_image_post_load_cleanup_default(image);
+}
