Hi Sven,
On Wed, Jun 24, 2020 at 12:23 PM Sven Van Asbroeck <thesve...@gmail.com> wrote:
> + /*
> + * On imx6 plus, enet_ref from ANATOP/CCM can be internally routed to
> + * be the PTP clock source, instead of having to be routed through
> + * pads.
> + * Board designs which route the ANATOP/CCM clock through pads are
> + * unaffected when routing happens internally. So on these designs,
> + * route internally by default.
> + */
> + if (clksel == IMX6Q_GPR1_ENET_CLK_SEL_ANATOP &&
> + of_machine_is_compatible("fsl,imx6qp")) {
> + if (!IS_ERR(gpr))
We could avoid checking for if (!IS_ERR(gpr)) two times in a row if
the following patch is applied before yours:
https://pastebin.com/raw/Ftkq2VVp
What do you think?
Thanks
