On 16/06/2020 15:34, Hanks Chen wrote:
> On Wed, 2020-03-25 at 17:39 +0100, Matthias Brugger wrote:
>>
>> On 25/03/2020 10:31, Hanks Chen wrote:
>>> this adds initial MT6779 dts settings fo board support,
>>
>> "for board support"
>>
>>> including cpu, gic, timer, ccf, pinctrl, uart...etc.
>>
>> The etc is PMU and PSCI and sysirq, correct? Let's list at least sysirq as
>> this
>> is something MediaTek specific.
>>
>>>
>>> Signed-off-by: Hanks Chen <hanks.c...@mediatek.com>
>>> ---
>>> arch/arm64/boot/dts/mediatek/Makefile | 1 +
>>> arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 31 ++++
>>> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 265
>>> +++++++++++++++++++++++++++
>>> 3 files changed, 297 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
>>> b/arch/arm64/boot/dts/mediatek/Makefile
>>> index 458bbc4..53f1c61 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -1,6 +1,7 @@
>>> # SPDX-License-Identifier: GPL-2.0
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> new file mode 100644
>>> index 0000000..164f5cb
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> @@ -0,0 +1,31 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (c) 2019 MediaTek Inc.
>>> + * Author: Mars.C <mars.ch...@mediatek.com>
>>> + *
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "mt6779.dtsi"
>>> +
>>> +/ {
>>> + model = "MediaTek MT6779 EVB";
>>> + compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
>>> +
>>> + aliases {
>>> + serial0 = &uart0;
>>> + };
>>> +
>>> + memory@40000000 {
>>> + device_type = "memory";
>>> + reg = <0 0x40000000 0 0x1e800000>;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:921600n8";
>>> + };
>>> +};
>>> +
>>> +&uart0 {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>> b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>> new file mode 100644
>>> index 0000000..422ff5f
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>> @@ -0,0 +1,265 @@
>> [...]
>>> +
>>> + uart_clk: dummy26m {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <26000000>;
>>> + #clock-cells = <0>;
>>> + };
>>
>> No real clocks for uart? What about CLK_INFRA_UARTx?
>
> sorry, I miss the clocks for uart
> I'll add "baud" and "bus" in next version.
>
> clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> clock-names = "baud", "bus";
>
>
>>
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupt-parent = <&gic>;
>>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
>>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
>>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
>>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
>>> + };
>>> +
>>> + soc {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + compatible = "simple-bus";
>>> + ranges;
>>> +
>> [...]
>>> +
>>> + uart0: serial@11002000 {
>>> + compatible = "mediatek,mt6779-uart",
>>> + "mediatek,mt6577-uart";
>>> + reg = <0 0x11002000 0 0x400>;
>>> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
>>> + clocks = <&uart_clk>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + uart1: serial@11003000 {
>>> + compatible = "mediatek,mt6779-uart",
>>> + "mediatek,mt6577-uart";
>>> + reg = <0 0x11003000 0 0x400>;
>>> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
>>> + clocks = <&uart_clk>;
>>> + status = "disabled";
>>> + };
>>
>> SoC has only two UARTs but clock driver has three, how comes?
>>
>
> In mt6779 SoC, we have four UARTs.
> but we only use UART0 and UART1 as standard serial ports for APMCU.The
> others for modem side.
> so we add two UARTs in dts.
>
Sorry for the late reply.
DTS describes the HW, so we should add all four to the mt6779.dtsi but only
enable the one that can be used.
BTW I thought modem works through user space application, so why don't you want
to expose them?
Regards,
Matthias
>>> +
>>> + audio: clock-controller@11210000 {
>>> + compatible = "mediatek,mt6779-audio", "syscon";
>>> + reg = <0 0x11210000 0 0x1000>;
>>> + #clock-cells = <1>;
>>> + };
>>> +
>>> + mfgcfg: clock-controller@13fbf000 {
>>> + compatible = "mediatek,mt6779-mfgcfg", "syscon";
>>> + reg = <0 0x13fbf000 0 0x1000>;
>>> + #clock-cells = <1>;
>>> + };
>>> +
>>> + mmsys: clock-controller@14000000 {
>>> + compatible = "mediatek,mt6779-mmsys", "syscon";
>>> + reg = <0 0x14000000 0 0x1000>;
>>> + #clock-cells = <1>;
>>> + };
>>
>> Please beware that we are refactoring the mmsys right now. Please use this
>> new
>> approach as this will go upstream soon.
>>
>> https://patchwork.kernel.org/project/linux-mediatek/list/?series=254897
>>
> Got it, I'll update new approach in next version.
> Thanks!
>
>> Regards,
>> Matthias
>>
>> _______________________________________________
>> Linux-mediatek mailing list
>> linux-media...@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-mediatek
>
