From: Hans de Goede <[email protected]> [ Upstream commit 0e0e10fde0e9808d1991268f5dca69fb36c025f7 ]
The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low). Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]> --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index f29014a7d672..5dfc17987b2b 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -712,6 +712,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Toshiba Encore WT8-A */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), -- 2.25.1
