Hi All,

I've encountered some issues with the Xavier while integrating some of our SDIO
modules. It turns out card detection was not working for the uSD socket and
I/Os were limited to 3.3 V. Also, the on-board eMMC module was using HS200 only.
I think it would make sense for the changes to go upstream. Please have a look.

Kind regards,
Tamas

Tamás Szűcs (4):
  arm64: tegra: Enable signal voltage switching on Tegra194 SDMMC1 and
    SDMMC3
  arm64: tegra: Fix CD on Jetson Xavier SDMMC1
  arm64: tegra: Configure SDIO cards on Jetson Xavier SDMMC1
  arm64: tegra: Enable HS400 on Tegra194 SDMMC4

 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  4 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 46 +++++++++++++++++++
 2 files changed, 49 insertions(+), 1 deletion(-)

-- 
2.20.1

Reply via email to