On 6/12/20 4:19 PM, Wesley Cheng wrote: > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig > index 074a2ef55943..f9165f9f9051 100644 > --- a/drivers/regulator/Kconfig > +++ b/drivers/regulator/Kconfig > @@ -797,6 +797,16 @@ config REGULATOR_QCOM_SPMI > Qualcomm SPMI PMICs as a module. The module will be named > "qcom_spmi-regulator". > > +config REGULATOR_QCOM_USB_VBUS > + tristate "Qualcomm USB Vbus regulator driver" > + depends on SPMI || COMPILE_TEST > + help > + If you say yes to this option, support will be included for the > + regulator used to enable the VBUS output. > + > + Say M here if you want to include support for enabling the VBUS output > + as a module. The module will be named "qcom_usb-regulator".
Hi, Shouldn't that module name match what is in the Makefile? > + > config REGULATOR_RC5T583 > tristate "RICOH RC5T583 Power regulators" > depends on MFD_RC5T583 > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > index c0d6b96ebd78..cbab28aa7b56 100644 > --- a/drivers/regulator/Makefile > +++ b/drivers/regulator/Makefile > @@ -89,6 +89,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o > obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o > obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o > obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o > +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o > obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o > obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o > obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o thanks. -- ~Randy
