[PATCH v4 10/11] arm64: dts: freescale: sl28: enable LED support

[Michael Walle]

Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".

Signed-off-by: Michael Walle <mich...@walle.cc>
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts          | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git 
a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts 
b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a1573d..49cf4fe05c80 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -16,6 +16,20 @@
        model = "Kontron KBox A-230-LS";
        compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
                     "kontron,sl28", "fsl,ls1028a";
+
+       leds {
+               compatible = "gpio-leds";
+
+               user_yellow {
+                       label = "s1914:yellow:user";
+                       gpios = <&sl28cpld_gpio0 0 0>;
+               };
+
+               user_green {
+                       label = "s1914:green:user";
+                       gpios = <&sl28cpld_gpio1 3 0>;
+               };
+       };
 };
 
 &enetc_mdio_pf3 {
-- 
2.20.1