On Monday 15 October 2007 19:05:18 Lukas Razik wrote: > Kernel Version: 2.6.22.9 (and others) > > Hello! > > I've an issue with a RTL8169 based network card (the same with a RTL8139 > card and another system) > > # lspci -v : > 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 > Gigabit Ethernet (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit > Ethernet > Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12 > I/O ports at e000 [size=256] > Memory at f9fdd000 (32-bit, non-prefetchable) [size=256] > [virtual] Expansion ROM at 10000000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > > At system startup I get the following messages: > # dmesg : > ... > r8169 Gigabit Ethernet driver 2.2LK loaded > eth0: RTL8169sb/8110sb at 0xc4830000, 00:0c:76:a0:05:92, IRQ 12 > ... > > But if I try to ifconfig the eth0 interface, I get these error messages: > # ifconfig eth0 192.168.0.2 > SIOCSIFADDR: No such device > eth0: ERROR while getting interface flags: No such device > > But if I try to ifconfig eth1 then it configures my network device which > was detected as eth0 at boot time... > ifconfig eth1 192.168.0.2 > > This leads to errors with other ethernet interfaces... > Any ideas what there's going wrong?
udev - persistent network rules in /etc/udev/rules.d/ -- Ondrej Zary - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
