On Tue, May 19, 2020 at 06:37:57PM +0000, Sunil Muthuswamy wrote:
> Linux has support for free page reporting now (36e66c554b5c) for
> virtualized environment. On Hyper-V when virtually backed VMs are
> configured, Hyper-V will advertise cold memory discard capability,
> when supported. This patch adds the support to hook into the free
> page reporting infrastructure and leverage the Hyper-V cold memory
> discard hint hypercall to report/free these pages back to the host.
> 
> Signed-off-by: Sunil Muthuswamy <sunil...@microsoft.com>
> ---
> First patch mail bounced backed. Sending it again with the email
> addresses fixed.
> ---
>  arch/x86/hyperv/hv_init.c         | 24 ++++++++
>  arch/x86/kernel/cpu/mshyperv.c    |  6 +-
>  drivers/hv/hv_balloon.c           | 93 +++++++++++++++++++++++++++++++
>  include/asm-generic/hyperv-tlfs.h | 29 ++++++++++
>  include/asm-generic/mshyperv.h    |  2 +
>  5 files changed, 152 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 624f5d9b0f79..925e2f7eb82c 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -506,3 +506,27 @@ bool hv_is_hibernation_supported(void)
>       return acpi_sleep_state_supported(ACPI_STATE_S4);
>  }
>  EXPORT_SYMBOL_GPL(hv_is_hibernation_supported);
> +
> +u64 hv_query_ext_cap(void)
> +{
> +     u64 *cap;
> +     unsigned long flags;
> +     u64 ext_cap = 0;
> +
> +     /*
> +      * Querying extended capabilities is an extended hypercall. Check if the
> +      * partition supports extended hypercall, first.
> +      */
> +     if (!(ms_hyperv.b_features & HV_ENABLE_EXTENDED_HYPERCALLS))
> +             return 0;
> +
> +     local_irq_save(flags);
> +     cap = *(u64 **)this_cpu_ptr(hyperv_pcpu_input_arg);

The cast here is not strictly needed.

> +     if (hv_do_hypercall(HV_EXT_CALL_QUERY_CAPABILITIES, NULL, cap) ==
> +         HV_STATUS_SUCCESS)

You're using the input page as the output parameter. Ideally we should
introduce hyperv_pcpu_output_arg page, but that would waste one page per
cpu just for this one call.

So for now I think this setup is fine, but I would like to add the
following comment.

    /*
     * Repurpose the input_arg page to accept output from Hyper-V for
     * now because this is the only call that needs output from the
     * hypervisor. It should be fixed properly by introducing an
     * output_arg page once we have more places that require output.
     */

> +             ext_cap = *cap;
> +
> +     local_irq_restore(flags);
> +     return ext_cap;
> +}
> +EXPORT_SYMBOL_GPL(hv_query_ext_cap);
> diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
> index ebf34c7bc8bc..2de3f692c8bf 100644
> --- a/arch/x86/kernel/cpu/mshyperv.c
> +++ b/arch/x86/kernel/cpu/mshyperv.c
> @@ -224,11 +224,13 @@ static void __init ms_hyperv_init_platform(void)
>        * Extract the features and hints
>        */
>       ms_hyperv.features = cpuid_eax(HYPERV_CPUID_FEATURES);
> +     ms_hyperv.b_features = cpuid_ebx(HYPERV_CPUID_FEATURES);
>       ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
>       ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
>  
> -     pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
> -             ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
> +     pr_info("Hyper-V: features 0x%x, additional features: 0x%x, hints 0x%x, 
> misc 0x%x\n",
> +             ms_hyperv.features, ms_hyperv.b_features, ms_hyperv.hints,
> +             ms_hyperv.misc_features);
>  
>       ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
>       ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
> diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
> index 32e3bc0aa665..77be31094556 100644
> --- a/drivers/hv/hv_balloon.c
> +++ b/drivers/hv/hv_balloon.c
> @@ -21,6 +21,7 @@
>  #include <linux/memory.h>
>  #include <linux/notifier.h>
>  #include <linux/percpu_counter.h>
> +#include <linux/page_reporting.h>
>  
>  #include <linux/hyperv.h>
>  #include <asm/hyperv-tlfs.h>
> @@ -563,6 +564,10 @@ struct hv_dynmem_device {
>        * The negotiated version agreed by host.
>        */
>       __u32 version;
> +
> +#ifdef CONFIG_PAGE_REPORTING
> +     struct page_reporting_dev_info pr_dev_info;
> +#endif
>  };
>  
>  static struct hv_dynmem_device dm_device;
> @@ -1565,6 +1570,83 @@ static void balloon_onchannelcallback(void *context)
>  
>  }
>  
> +#ifdef CONFIG_PAGE_REPORTING
> +static int hv_free_page_report(struct page_reporting_dev_info *pr_dev_info,
> +                 struct scatterlist *sgl, unsigned int nents)
> +{
> +     unsigned long flags;
> +     struct hv_memory_hint *hint;
> +     int i;
> +     u64 status;
> +     struct scatterlist *sg;
> +
> +     WARN_ON(nents > HV_MAX_GPA_PAGE_RANGES);

Should we return -ENOSPC here?

> +     local_irq_save(flags);
> +     hint = *(struct hv_memory_hint **)this_cpu_ptr(hyperv_pcpu_input_arg);
> +     if (!hint) {
> +             local_irq_restore(flags);
> +             return -ENOSPC;
> +     }
> +
> +     hint->type = HV_EXT_MEMORY_HEAT_HINT_TYPE_COLD_DISCARD;
> +     hint->reserved = 0;
> +     for (i = 0, sg = sgl; sg; sg = sg_next(sg), i++) {
> +             int order;
> +             union hv_gpa_page_range *range;
> +

Unfortunately I can't find the semantics of this hypercall in TLFS 6, so
I have a few questions here.

> +             order = get_order(sg->length);
> +             range = &hint->ranges[i];
> +             range->address_space = 0;

I guess this means all address spaces?

> +             range->page.largepage = 1;

What effect does this have? What if the page is a 4k page?

> +             range->page.additional_pages = (1ull << (order - 9)) - 1;

What is 9 here? Is there a macro name *ORDER that you can use?

Wei.

Reply via email to