On Tue, 19 May 2020 09:50:59 +0200
Jonathan Albrieux <jonathan.albri...@gmail.com> wrote:
> v2: fixed missing description
Don't put change log here....
>
> Add vdd-supply and vddio-supply support. Without this support vdd and vddio
> should be set to always-on in device tree
Kind of the opposite. If they are always on we don't have to provide them
in the device tree.
A few trivial things inline.
>
> Signed-off-by: Jonathan Albrieux <jonathan.albri...@gmail.com>
> ---
Change log goes here so we don't end up keeping it in the git log.
> drivers/iio/imu/bmi160/bmi160.h | 2 ++
> drivers/iio/imu/bmi160/bmi160_core.c | 27 ++++++++++++++++++++++++++-
> 2 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h
> index 621f5309d735..923c3b274fde 100644
> --- a/drivers/iio/imu/bmi160/bmi160.h
> +++ b/drivers/iio/imu/bmi160/bmi160.h
> @@ -3,10 +3,12 @@
> #define BMI160_H_
>
> #include <linux/iio/iio.h>
> +#include <linux/regulator/consumer.h>
>
> struct bmi160_data {
> struct regmap *regmap;
> struct iio_trigger *trig;
> + struct regulator_bulk_data supplies[2];
> };
>
> extern const struct regmap_config bmi160_regmap_config;
> diff --git a/drivers/iio/imu/bmi160/bmi160_core.c
> b/drivers/iio/imu/bmi160/bmi160_core.c
> index 6af65d6f1d28..9bbe0d8e6720 100644
> --- a/drivers/iio/imu/bmi160/bmi160_core.c
> +++ b/drivers/iio/imu/bmi160/bmi160_core.c
> @@ -15,6 +15,7 @@
> #include <linux/delay.h>
> #include <linux/irq.h>
> #include <linux/of_irq.h>
> +#include <linux/regulator/consumer.h>
>
> #include <linux/iio/iio.h>
> #include <linux/iio/triggered_buffer.h>
> @@ -709,6 +710,12 @@ static int bmi160_chip_init(struct bmi160_data *data,
> bool use_spi)
> unsigned int val;
> struct device *dev = regmap_get_device(data->regmap);
>
> + ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
> if (ret)
> return ret;
> @@ -793,9 +800,17 @@ int bmi160_probe_trigger(struct iio_dev *indio_dev, int
> irq, u32 irq_type)
> static void bmi160_chip_uninit(void *data)
> {
> struct bmi160_data *bmi_data = data;
> + struct device *dev = regmap_get_device(bmi_data->regmap);
> + int ret;
>
> bmi160_set_mode(bmi_data, BMI160_GYRO, false);
> bmi160_set_mode(bmi_data, BMI160_ACCEL, false);
> +
> + ret = regulator_bulk_disable(ARRAY_SIZE(bmi_data->supplies),
> + bmi_data->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to disable regulators: %d\n", ret);
> + }
No need for brackets around a 1 line if block
if (ret)
dev_err(dev, "failed to disable regulators: %d\n", ret);
> }
>
> int bmi160_core_probe(struct device *dev, struct regmap *regmap,
> @@ -815,6 +830,16 @@ int bmi160_core_probe(struct device *dev, struct regmap
> *regmap,
> dev_set_drvdata(dev, indio_dev);
> data->regmap = regmap;
>
> + data->supplies[0].supply = "vdd";
> + data->supplies[1].supply = "vddio";
> + ret = devm_regulator_bulk_get(dev,
> + ARRAY_SIZE(data->supplies),
> + data->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to get regulators: %d\n", ret);
> + return ret;
> + }
> +
> ret = bmi160_chip_init(data, use_spi);
> if (ret)
> return ret;
> @@ -853,6 +878,6 @@ int bmi160_core_probe(struct device *dev, struct regmap
> *regmap,
> }
> EXPORT_SYMBOL_GPL(bmi160_core_probe);
>
> -MODULE_AUTHOR("Daniel Baluta <daniel.bal...@intel.com");
> +MODULE_AUTHOR("Daniel Baluta <daniel.bal...@intel.com>");
Good fix but shouldn't be in this patch. Put it a separate patch on it's own.
> MODULE_DESCRIPTION("Bosch BMI160 driver");
> MODULE_LICENSE("GPL v2");
